DELL Command Configure Software User Manual

Remarques, précautions et avertissements

NOTE: Une REMARQUE indique des informations importantes qui vous aident à mieux utiliser votre produit.

ATTENTION : Une ATTENTION indique soit des dommages potentiels au matériel, soit une perte de données et vous indique comment éviter le problème.

AVERTISSEMENT : Un AVERTISSEMENT indique un risque potentiel de dommages matériels, de blessures corporelles ou de décès.

© 2025 Dell Inc. ou ses filiales. Tous droits réservés. Dell Technologies, Dell et les autres marques commerciales sont des marques commerciales de Dell Inc. ou de ses filiales. Les autres marques commerciales peuvent être des marques commerciales de leurs propriétaires respectifs.

Introduction to Dell Command | Configure

Dell Command | Configure is a software package that provides BIOS configuration capability for Dell client systems. IT administrators can use this tool to configure BIOS settings and create BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI).

NOTE: Dell Command | Configure replaces Dell Client Configuration Toolkit version 2.2.1.

• Commande Dell | Configure 4.10.1 ou version ultérieure génère un SCE 64 bits avec des contraintes.
• Dell Command | Configure 4.10.1 or later on a 64–bit ARM client machine, generates an ARM-based 64–bit SCE.

For more information, see the Dell Command | Configure 5.x User’s Guide on the Support | Dell site.

Thèmes:

• Version
• Public visé
• Objectif du document

Version

Ce chapitre fournit un aperçuview of the Dell Command | Configure version history, including release dates, supported operating systems, and compatible platform architectures to help you identify which version aligns with your system requirements.

Dell Command | Configure supports the following Windows operating systems:

• Windows 11
• Windows 10
• Environnement de préinstallation Windows (Windows PE)

The following table lists the available Dell Command | Configure versions along with their release dates, supported operating systems, and platform compatibility.

Tableau 1. Matrice des versions

NOTE: Starting from the Dell Command | Configure 5.1.0 release, support for 32-bit systems has been discontinued.

Public visé

The installation guide for Dell Command | Configure is intended for IT professionals and system administrators. It offers comprehensive instructions for configuring BIOS settings and creating BIOS packages using both the Dell Command Configure User Interface (UI) and Command-Line Interface (CLI).

Objectif du document

This document provides instructions for installing and configuring BIOS settings and creates BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI) for efficient BIOS management.

Accéder à Dell Command | Configurer le programme d'installation

La commande Dell | Configurer l'installation file is available as a Dell Update Package (DUP) at Support | Dell. Follow these steps to download the DUP:

1. Accédez à Assistance | Dell.
2. Sous Avec quel produit pouvons-nous vous aider, entrez le Service Tag de votre appareil Dell pris en charge et cliquez sur SoumettreOu cliquez sur Détecter un ordinateur personnel.
3. Sur la page de support produit de votre appareil Dell, cliquez sur Pilotes et téléchargements.
4. Cliquez Rechercher manuellement un pilote spécifique pour vous [modèle].
5. Vérifier La gestion du système case à cocher sous Catégorie dérouler.
6. Situer Dell Command | Configurer in list and select Télécharger sur le côté droit de la page.
7. Localisez le fichier téléchargé file sur votre ordinateur (dans Google Chrome, le file apparaît en bas de la fenêtre Chrome), et lancez l'exécutable file.
8. Suivez les instructions à l’écran.

Dell Command | Configure for Windows

This section provides details about the supported Windows versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Windows systems.

Thèmes:

• Systèmes d'exploitation pris en charge pour Windows
  
• Plateformes prises en charge
  
• Installing Dell Command | Configure on Windows systems
• Uninstalling Dell Command | Configure from Windows systems
• Upgrading Dell Command | Configure on Windows systems

Systèmes d'exploitation pris en charge pour Windows

Tableau 2. Systèmes d'exploitation pris en charge

Plateformes prises en charge

Table 3. Supported platforms

Table 3. Supported platforms (continued)

NOTE: Platforms must support WMI-ACPI BIOS for full functionality.

NOTE: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell

Installing Dell Command | Configure on Windows systems

You can install Dell Command | Configure on Windows systems using either the Dell Update Package (DUP) or the MSI installer.
Both installers support standard and silent (unattended) installation modes.

NOTE: Microsoft .NET 4.8.1 or later must be installed on the client system to install Dell Command | Configure using the user interface.

NOTE: If User Account Control (UAC) is enabled on a Windows 10 system, silent mode installation is not allowed. Ensure that you have administrative privileges before installing Dell Command | Configure in silent mode.

Prérequis

Before installing Dell Command | Configure, ensure the following:

• A supported Windows operating system is installed and running.
• Dell Command | Configure installation file is available (downloadable from Support | Dell).
• Administrator privileges are available on the system.
• Microsoft .NET 4.8.1 (for UI) and .NET 8.0 SDK (for Dell Command Secure BIOS Configuration Server) are installed.
• Microsoft Visual C++ Redistributable for Visual Studio 2022 is installed.
• WMI-ACPI compliant BIOS is available for full functionality.

NOTE:

• The system must be connected to a stable network when installing Dell Command | Configure with support for Dell Command Secure BIOS Configuration.
• On Windows 10 or later, enable Microsoft .NET Framework 4.8 or later version from the Activer ou désactiver les fonctionnalités Windows écran.
• The system has limited functionality if it does not have a WMI-ACPI compliant BIOS. Update the BIOS with a compatible version, if available. For more information, see Windows SMM Security Mitigations Table (WSMT) Compliance section in the Dell Command | Configure User’s Guide at Support | Dell.

Install Dell Command | Configure using DUP: Standard installation

To install Dell Command | Configure, run the Dell Update Package (DUP) with default settings. This method simplifies deployment and requires minimal user input.

1. Double-cliquez sur le DUP téléchargé, cliquez sur Oui, puis cliquez sur INSTALLER.
   La commande Dell | L'assistant de configuration de l'installation s'affiche.
2. Exécutez l'assistant d'installation.
   Pour plus d'informations, voir Exécution de l'assistant d'installation.

Install Dell Command | Configure using DUP: Silent installation

To install Dell Command | Configure silently, use the Dell Update Package (DUP) with command-line switches that suppress user prompts. This method enables automated, unattended installation.

1. Browse to the folder where you have downloaded the Dell Update Package (DUP) and open the command prompt.
2. Exécutez la commande suivante :

Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.

NOTE: For more information about using commands, type any one of the following commands:

• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.
• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/?.

NOTE: During silent installation using DUP, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server.

Install Dell Command | Configure using MSI file: Standard installation

To install Dell Command | Configure, run the MSI file directly for a standard installation with default settings providing a simple and user-friendly setup process.

1. Double-cliquez sur le package de mise à jour Dell (DUP) téléchargé, puis cliquez sur Oui.
2. Cliquez sur EXTRAIT.
   La fenêtre Rechercher un dossier s'affiche.
3. Specify a folder location on the system, or create a folder to extract the files, and click OK.
4. À view l'extrait files, cliquez sur View Dossier
   Le dossier contient les éléments suivants files:
   ● 1028.mst
   ● 1031.mst
   ● 1034.mst
   ● 1036.mst
   ● 1040.mst
   ● 1041.mst
   ● 1043.mst
   ● 2052.mst
   ● 3076.mst
   ● Command_Configure.msi
   ● mup.xml
   ● package.xml
5. Pour accéder à Dell Command | Configurez l'assistant d'installation, double-cliquez sur Command_Configure.msi.
6. Exécutez l'assistant d'installation.
   Pour plus d'informations, voir Exécution de l'assistant d'installation.
   After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information about configuring the systems, see the following documents at Support | Dell:
   ● Dell Command | Configure Command-Line Interface Reference Guide
   ● Dell Command | Configure User’s Guide

Exécution de l'assistant d'installation

To run the installation wizard for installing the Dell Command | Configure .msi file sur votre appareil :

1. Browse to the folder in which you have extracted the Command_Configure.msi or DUP file.
2. Right-click the .msi or DUP and click Run as administrator.
   L'assistant d'installation s'affiche.
3.  Cliquez sur Suivant.
   L'écran Contrat de licence s'affiche.
4. Lisez le contrat de licence et cliquez sur J'accepte les termes du contrat de licence, puis cliquez sur Suivant.
   L'écran Informations client s'affiche.
5. Type the username and organization, select one of the following options, and then click Next.
   ● For multiple users, select Anyone who uses this computer (all users).
   ● For a single user, select Only for me (Dell Computer Corporation).
   L'écran de configuration personnalisée s'affiche.
6. Cliquez sur Suivant pour installer Dell Command | Configurez CLI et GUI dans le répertoire par défaut. Le Dell Command | Les répertoires d'installation configurés sont :
   ● For 32-bit systems, C:\Program Files\Dell\Command Configurer.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configurer.
   L'écran Prêt à installer le programme s'affiche.
7. Cliquez sur Oui.
   The Installing Dell Command | Configure screen is displayed. When the installation completes, the installation wizard- completed screen is displayed.
8. Cliquez sur Terminer.
   Si la commande Dell | Configure GUI est installé avec succès, le raccourci de l'interface graphique s'affiche sur le bureau.

Install Dell Command | Configure using .msi file: Silent installation

You can seamlessly install Dell Command | Configure in silent mode using the .msi file, leveraging command-line parameters for efficient deployment.

NOTE: Dell Command | Configure silent mode installation supports installing the Dell Command Secure BIOS Configuration Server, but it does not support the Dell Command | Configure option.

NOTE: By default, during silent installation using the .msi file, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server. To install DCC with DCSBC server, use the following command: msiexec.exe /i Command_Configure.msi DCSBC=1 /qn

1. Accédez au dossier où Dell Command | Le programme d'installation de Configure est extrait du Dell Update Package (DUP).
2. Open Command Prompt as administrator.
3. Exécutez la commande suivante : msiexec.exe /i Command_Configure.msi /qn
   La commande Dell | Les composants de configuration sont installés en mode silencieux aux emplacements suivants :
   ● For 32-bit systems, C:\Program Files\Dell\Command Configurer.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configurer.

Installation avec les langues prises en charge

To assess silent and unattended with supported languages, run the following command: msiexec /i Command_Configure.msi TRANSFORMS=1036.mst.

To specify the installation language, use the command-line option TRANSFORMS=<language ID>.mst, where <language ID> corresponds to one of the following:

• 1028 — Taïwan chinois
• 1031 — allemand
• 1033 — anglais
• 1034 — Espagnol
• 1036 — Français
• 1040 — italien
• 1041 — Japonais
• 1043 — Néerlandais
• 2052 — Chinois simplifié
• 3076 — Hongkong chinois

NOTE: If the specified language or the default operating system language is not supported, the installation defaults to English.

Uninstalling Dell Command | Configure from Windows systems

To uninstall Dell Command | Configure, use the Control Panel to remove the application from Windows ensuring clean removal without affecting system settings.

1. Ouvrir le Panneau de contrôle.
2. Aller à Programmes > Programmes et fonctionnalités.
3. Find Dell Command | Configure dans la liste.
4. Right-click it and select Désinstaller.
5. Follow the on-screen prompts to complete the uninstallation.

Upgrading Dell Command | Configure on Windows systems

You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the .msi file.

NOTE: Microsoft .NET Framework 8.0 or later must be installed on the client system to ensure a successful Dell Command | Configure user interface installation.

NOTE: If Windows User Account Control (UAC) is enabled on Windows 10 and 11 systems, you cannot install Dell Command | Configure in silent mode. Ensure that you have an administrative privilege before installing Dell Command | Configure in silent mode.

NOTE: This system does not have a WMI-ACPI compliant BIOS, so the limited functionality is available. Update the BIOS with a compatible version, if available. For more information, see Dell Command | Configure 5.x Release Notes at Support | Dell.

NOTE: You cannot install and upgrade Dell Command | Configure on non-WMI-ACPI in silent mode.

Upgrade Dell Command | Configure using DUP file

Effectuez les étapes suivantes pour mettre à niveau Dell Command | Configure (anciennement Dell Client Configuration Toolkit) vers la version suivante :

1. Double-click the downloaded DUP, and then click INSTALLER.
   La commande Dell | L'assistant de configuration de l'installation est lancé.
2. Exécutez l'assistant d'installation et suivez les instructions affichées à l'écran.

Upgrade Dell Command | Configure using .msi file

To upgrade Dell Command | Configure, uninstall the existing version and install the new version using the .msi installer ensuring a clean upgrade with the latest features and fixes.

1. Télécharger la dernière installation file Dell-Command-Configure-
   Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE from Support | Dell.
2. Extract the installation using any of the following:
   ● From the folder where you extracted the file, double-click the Dell_Command_Configure.msi file
   ● From the command prompt, browse to the directory where you extracted the file, puis exécutez la commande suivante :
   msiexec.exe /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=VOMUS
   NOTE: L'écran de l'assistant d'installation s'affiche, suivi de « Une ancienne version de Dell Command | Configure est détecté sur ce système. Si vous continuez, le programme d'installation supprimera l'ancienne version et procédera à l'installation de la dernière version. Si vous annulez l'installation de la dernière version, le système ne sera pas restauré à la version précédente de Dell Command | Configurez. Voulez-vous continuer?" message.
3. Suivez les instructions à l'écran pour effectuer la mise à niveau.
   NOTE: Pour une mise à niveau silencieuse, exécutez la commande suivante : msiexec /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=vmous REBOOT=REALLYSUPPRESS /qn
   NOTE: If a previous version of Dell Command | Configure is installed in a non-default directory, you cannot upgrade to the latest Dell Command | Configure version. In this case, uninstall the existing version and assess fresh installation of the latest version.

Mise à niveau dans le dossier par défaut

To upgrade Dell Command | Configure, run a command from the extracted DUP folder to silently install the update in the default directory.

1. Accédez au dossier dans lequel vous avez extrait Dell Command | Configurez le programme d'installation à partir du Dell Update Package (DUP).
2. Exécutez la commande suivante : msiexec.exe /i Command_Configure.msi /qn
   La commande Dell | Les composants de configuration sont installés en mode silencieux aux emplacements suivants :
   ● For 32-bit systems, C:\Program Files (x86)\Dell\Command Configurer.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configurer.

Dell Command | Configure for Linux

This section provides details about the supported Linux versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Linux systems.

Thèmes:

• Supported operating systems for Linux
• Supported Platforms for Linux
• Installing Dell Command | Configure on Linux systems
• Uninstalling Dell Command | Configure on Linux systems
• Upgrading Dell Command | Configure for systems running on Linux

Supported operating systems for Linux

Tableau 4. Systèmes d'exploitation pris en charge

Supported Platforms for Linux

Table 5. Supported platforms

NOTE: Platforms must support WMI-ACPI BIOS for full functionality.

NOTE: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell.

Installing Dell Command | Configure on Linux systems

To install Dell Command | Configure on Linux, download the appropriate .deb or .rpm package from Dell Support and use your package manager to install it enabling CLI-based BIOS configuration on supported Dell systems.

NOTE:

• Dell Command | Configure user interface is not supported on systems running the Linux operating system.
• Dell Command Secure BIOS Configuration(DCSBC) is not supported on systems running the Linux operating system.

You can install the Dell Command | Configure for Red Hat and Debian-based linux distributions, by following these steps:

1. Go to Support | Dell, download the tar.gz file.
2. NOTE:
   ● If you have downloaded the package for Red Hat Enterprise Linux, the RPMs are included in the package.
   ● If you have downloaded the package for Ubuntu Desktop, the Debians are included in the package.

Install the RPMs or Debians as appropriate for your system.
Le chemin d'installation par défaut est /opt/dell/dcc.

Prérequis

• Le poste de travail doit fonctionner sur un système d'exploitation Linux pris en charge.
• Téléchargez les bibliothèques openSSL 1.x pour installer et exécuter Dell Command | Configurez sur Red Hat Enterprise Linux 8 et Ubuntu Desktop 20.04.
• Download openSSL 3.x libraries to install and run Dell Command | Configure on Red Hat Enterprise Linux 9, Ubuntu Desktop 22.04, and Ubuntu Desktop 24.04.

Install Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To install Dell Command | Configure on Red Hat Enterprise Linux 8 or 9, download the RPM package from Dell Support and install it using the command line.

1. Depuis dell.com/support, Download the command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz file from Support | Dell .
2. Décompressez le file en utilisant la commande suivante :

tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 8 or 9 systems using 64-bit RPMs, run the commands in the following order:

rpm —ivh srvadmin-hapi-<version number>.el8.x86_64.rpm

rpm —ivh command-configure-<version number>-<Build Number>.<RHEL Version>.<architecture>.rpm

Installing Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04

To install Dell Command | Configure on supported Ubuntu versions, download the DEB package from Dell Support and install it using the command line. See Accessing Dell Command | Configure installer.

1. Download the command_configure-<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz from Support | Dell.
2. Décompressez le file using the following command: tar -xvzf command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz
   The installer command-configure_<version><Build Number>.<Ubuntu
   Version>_ .tar.gz contient les packages suivants qui doivent être installés dans l'ordre suivant :
   ● srvadmin-hapi_<version number>_amd64.deb
   ● command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
3. To install HAPI, run the following command: dpkg -i srvadmin-hapi_<version number>_amd64.deb
   NOTE: If the installation on Ubuntu fails due to dependency issues with libc, ensure that you upgrade the system by running the following command:
   apt-get -f installer
4. To install Dell Command | Configure, run:
   dpkg -i command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
   Le chemin d'installation par défaut est /opt/dell/dcc.
   NOTE: If the installation on Ubuntu fails due to dependency problems libc, then ensure to upgrade the system using apt-get upgrade command:
   apt-get -f installer

Uninstalling Dell Command | Configure on Linux systems

To uninstall Dell Command | Configure on Linux, run the appropriate RPMs for your system to remove the installed package (rpm or deb) based on your distribution removing the application and its components.

NOTE: Uninstalling or upgrading Dell Command | Configure on systems running supported Linux operating systems leave empty files and folders on the system. These residual files and folders do not affect system functionality.

Uninstall Dell Command | Configure from Red Hat Enterprise Linux 8 and 9

Pour désinstaller Dell Command | Configurez sur les systèmes exécutant Red Hat Enterprise Linux 8 ou 9, exécutez les commandes dans l'ordre suivant :

rpm -e command-configure-<version>-<build number>.el8/9.x86_64

rpm -e srvadmin-hapi- .el8.x86_64

Uninstall Dell Command | Configure from Ubuntu Desktop

You can uninstall Dell Command | Configure and dependent packages on systems running Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

NOTE: You must uninstall Dell Command | Configure before uninstalling the dependent packages.

1. Pour désinstaller Dell Command | Configurer et supprimer la configuration files et temporaire files, run the following command: dpkg –purge command-configure
2. Pour désinstaller Hapi et supprimer la configuration files et temporaire files, run the following command: dpkg –purge srvadmin-hapi
3. To verify that the Dell Command | Configure is uninstalled in your system, run the following command: dpkg –l | grep command-configure
   If Dell Command | Configure details are not displayed, then the uninstallation is successful.

Upgrading Dell Command | Configure for systems running on Linux

You can upgrade Dell Command | Configure on Linux, uninstall the existing version and install the latest package.

1. Download the Dell Command | Configure .tar.gz file from Support | Dell and save it on your system.
2. Mettre à niveau la version de Dell Command | Configurez sur le système.

NOTE: Uninstalling and upgrading Dell Command | Configure on systems running supported Linux operating systems leaves empty files et dossiers sur le système. Le fileLes s et les dossiers n'ont aucun impact fonctionnel.

Upgrade Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To upgrade Dell Command | Configure on Red Hat Eenterprse Linux 8 or 9, uninstall the current version and install the latest RPM package.

1. Download the command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz file from Support | Dell.
2. Décompressez le file using the following command: tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz

To upgrade Dell Command | Configure on computers running Red Hat Enterprise Linux 8 or 9 computers using 64-bit RPMs, run the commands in the following order:

rpm -Uvh –nodeps srvadmin-hapi- . .x86_64.rpm

rpm —Uvh command-configure-<version>-<build number>.<RHEL Version>.x86_64.rpm

Upgrade Dell Command | Configure on Ubuntu Desktop

To upgrade Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

1. Download the command_configure-linux-<version>-<build number>.tar.gz from Support | Dell.
2. Décompressez le file using the following command: tar -zxvf command-configure_<version>-<build number>.<Ubuntu Version>_amd64.tar.gz
3. Pour effectuer la mise à niveau, exécutez la commande suivante :
   dpkg -i srvadmin-hapi_<version number>_amd64.deb
   dpkg -i command-configure_<version>-<build number>.<Ubuntu Version>_amd64.deb
4. Pour vérifier la version actuelle de Dell Command | Configurez la version, accédez au chemin d'installation par défaut et exécutez :
   ./cctk –version

Advanced Dell Command | Configure installation scenarios

Ce chapitre fournit un aperçuview of advanced installation scenarios for Dell Command | Configure, including secure BIOS configuration and installation in the Windows Preinstallation Environment (Windows PE). These scenarios ensure robust system management and deployment capabilities.

Thèmes:

• Installing Dell Command | Configure for Dell Command Secure BIOS Configuration
• Dell Command | Configure for Windows Pre installation Environment.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration

Hardware Security Module (HSM) is used as a signing method for the Dell Command Secure BIOS Configuration workflow.

NOTE: Dell Command Secure BIOS Configuration(DCSBC) is not compatible with ARM64-bit systems.

Prérequis

Dell Command Secure BIOS Configuration with Dell Command | Configure allows you to use any Hardware Security Module vendor to sign the Dell Command Secure BIOS Configuration Server charges utiles.

Assurez-vous que les exigences suivantes sont remplies :

• HSM Setup and OpenSSL: Ensure that you have set up your Hardware Security Module (HSM) provider in your environment. It is recommended to use OpenSSL as the open-source signing tool to generate signatures, which can then be used by Dell Command | Configure.
• Update HSMSigning.bat File: You must update the HSMSigning.bat file with a command compatible with your HSM setup. This file is at: C:\Program Files (x86)\Dell\Command Configure\X86_64\HSMSigning.bat. Modify the signature generation command in line 12 according to your HSM provider requirements. The default command is: “%OpensslPath%\openssl.exe” dgst -sha256 -sign “%ObfuscatedKeyPath%\%PrivateKeyName%” -out “%outlocat%\blobsignature.txt” %1 . Ensure that the command you provide generates the signature in the same path as specified in the default command, with the filename set as blobsignature.txt. Do not modify the last option %1, as it allows the signature command to accept the payload file that is generated by Dell Command | Configure during runtime for signing.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration Server

To install Dell Command | Configure for use with the Secure BIOS Configuration Server, download the appropriate installer package and follow the setup instructions to enable remote BIOS configuration and policy enforcement.

1. Run Command_Configure.msi from Power Shell in administrator mode.
   L'assistant d'installation s'affiche.
2. Select the Dell Command Secure Bios Configuration Server option.
3. Cliquez sur Suivant.
4. Cliquez sur Installer pour commencer l'installation.
   The installation completion wizard is displayed.
5. Cliquez sur Terminer pour terminer l'installation.
   The Dell Secure Configuration Service is created and initiated in the Windows Services tab.
   NOTE: To run Dell Secure Configuration on a particular port, the port must be updated to the appsettings.json file à la URL line. Locate the following path: C:\Program Files (x86)\Dell\Command Configure\ABIWindowsService\appsettings.json.
   NOTE: The start time for Dell Command Secure BIOS Configuration varies depending on the platforms—the maximum time limit is set to 2-3 minutes.

Configuring the Dell Command Secure BIOS Configuration Server using HTTPS

The Dell Command | Configure installer configures the Dell Command Secure BIOS Configuration Server for HTTP calls. For added security, you can also configure the Dell Command Secure BIOS Configuration Server using HTTPS on the system where Dell Command Secure BIOS Configuration is installed, by following these steps:

1. Press the Windows key and press the R key to launch the Run dialog box.
2. Type Services.msc and then press Enter to open Windows Services.
3. Locate Dell Secure Configuration Service.
4. Right-click Dell Secure Configuration Service, and click Stop.
5. Go to the Dell Command | Configure installation path C:\Program Files (x86)\Dell\Command
   Configure\ABIWindowsService\appsettings.json, and modify the appsettings.json file avec les éléments suivants :
   {
   “Logging”: {
   “LogLevel”: {
   “Default”: “Information”,
   “Microsoft.Hosting.Lifetime”: “Information”
   }
   },
   “Kestrel”: {
   “Endpoints”: {
   “HttpsInlineCertFile”: {
   «Url”: “< URL:Port>”,
   “ClientCertificateMode”: “AllowCertificate”,
   “Certificate”: {
   “Path”: “<Https certificate complete path>”,
   “Password”: “<Https Cert Password>”
   }
   }
   }
   }
   }
   NOTE: The certificate to be provided must be associated to the Url specified in the same field. Also, specify the Client Certificate Modeas Allow Certificate to allow Dell Command Secure BIOS Configuration server to function without any issues. You must specify the complete Path for the Https certificate and the Password for authenticating the Https Certificate. The Password can be left empty if the Https certificate does not require a password authentication.
6. Save changes to the appsettings.json file and start the Dell Secure Configuration Service from Windows Services.
   NOTE: There are other ways as well to configure an HTTPS Server. For more details, see Configure endpoints for the ASP.NET Core Kestrel web server and Client Certificate Mode Enum.

Dell Command | Configure for Windows Preinstallation Environment

Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system that is installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 10.0, and Windows PE 11.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).

Using Windows PE 10.0, and Windows PE 11.0, you can integrate Dell Command | Configure.

NOTE: Dell Command | Configure 5.x for Windows Preinstallation Environment is not compatible with ARM64-bit systems.

Création d'un environnement de préinstallation d'image de démarrage à l'aide de Windows PE 10.0 et 11.0

To create a bootable image using Windows PE 10.0 or 11.0, use the Windows ADK to generate a customized Windows PE environment, then add the necessary tools and drivers before creating a bootable ISO or USB. This environment supports preinstallation tasks such as BIOS configuration and OS deployment.

1. De Microsoft website, téléchargez et installez Windows ADK sur le système client.
   NOTE: Lors de l'installation, sélectionnez uniquement Outils de déploiement and Windows Preinstallation Environment (Windows PE).
2. From Support | Dell, download and install Dell Command | Configure.
3. Installer la commande Dell | Configurez.
4. Intégrez la commande Dell | Configurer la structure de répertoire dans un ISO file pour créer une image ISO amorçable.

Intégration de Dell Command | Configurer la structure de répertoire dans un ISO file using Windows PE 10.0/11.0

To integrate the Dell Command | Configure directory into an ISO, copy it to the Windows PE working folder and create the Windows PE 10.0/11.0 image.

1. Installez le système d'exploitation Windows 11.
2. Download and install Windows ADK for Windows 10/11 operating system.
3. Create a Windows PE 10.0/11.0 image.

Creating a Windows PE 10.0/11.0 image

1. Browse to the following location:.
   ● For 32-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86.
   ● For 64-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86_64.
2. Ouvrez l'invite de commande avec les privilèges d'administrateur.
3. Run the following command: .
   ● Windows PE 10.0
   ○ For 32-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ● Windows PE 11.0
   ○ For 32-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   NOTE: Assurez-vous que le chemin utilisé dans la commande est celui de Dell Command | Configurer le dossier.
4. Copy the ISO image to the following location:
   ● For 32-bit systems, C:\winpe_x86\WIM.
   ● For 64-bit systems, C:\winpe_x86_64\WIM.

Ressources et soutien

Vous pouvez accéder aux documents requis en sélectionnant votre produit.

1. Aller à Assistance | Dell.
2. Cliquez Parcourir tous les produits.
3. Cliquez Software & Solutions.
4. Cliquez Gestion des systèmes clients.
5. Cliquez Dell Command | Configure.
6. Cliquez Sélectionnez ce produit.
7. À view les documents requis, cliquez sur le nom du produit et le numéro de version requis.

NOTE: Si vous ne disposez pas d'une connexion Internet active, vous pouvez trouver des informations de contact sur votre facture d'achat, votre bon de livraison, votre facture ou votre catalogue de produits Dell.

Dell provides several online and telephone-based support and service options. Availability varies by country or region and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1. Accédez à Assistance | Dell.
2. Sélectionnez votre catégorie de support.
3. Vérifiez votre pays ou votre région dans le Choisissez un pays/une région liste déroulante en bas de la page.
4. Sélectionnez le service ou le lien d'assistance approprié en fonction de vos besoins.

Documents / Ressources

DELL Command Configure Software [pdf] Manuel de l'utilisateur Command Configure Software, Configure Software, Software

Références

• Manuel d'utilisation