Anker SOLIX E10 with Power Dock Instruction Manual

Introduction

The Anker SOLIX E10 with Power Dock is a comprehensive whole-home energy backup system designed to provide reliable power during outages and optimize energy usage. This system features a 6kWh battery, expandable up to 90kWh, and a 200A Power Dock for seamless automatic switchover in less than 20 milliseconds. It supports up to 9kW solar input per unit and is compatible with a Smart Generator for extended backup. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Anker SOLIX E10 with Power Dock.

Qu'y a-t-il dans la boîte

The Anker SOLIX E10 with Power Dock package includes the following components:

• E10 Power Module
• Module de batterie B6000
• Power Dock (200A ATS)
• Câble de sortie 240 V
• 120V AC Charging Cable
• Support fixe
• ON-Grid Cable
• 3× CTs (Current Transformers)
• Guide de démarrage rapide

Please ensure all components are present and undamaged upon unboxing. Contact customer support if any items are missing or faulty.

Configuration et installation

The Anker SOLIX E10 with Power Dock is designed for effortless setup, typically taking hours, not days. Professional installation is recommended for optimal safety and performance. Expert support and licensed electricians are available.

Précautions avant l'installation

• Angle: Install the unit in an upright position. Do not tilt it in any direction.
• Emplacement: Mount on solid, flat floors or load-bearing walls.
• Espace: Maintain sufficient clearance from other devices and flammable materials, and leave adequate space for heat dissipation.
• Manutention: Lift and move battery modules with two people due to their weight (approx. 60.6 lbs per module).
• Ensure the installation location allows for the 6ft plug-and-play power cable to cover the distance between the Combiner Box and E10 inverters.
• Ensure the Wi-Fi signal is strong and reliable at the installation site.

Options de montage

The Anker SOLIX E10 system offers flexible mounting options to suit various environments:

• Montage au sol : Suitable for solid, flat ground with no flooding risk.
• Metal Base Mounting: Ideal for areas prone to flooding, using a metal pad to elevate the system (Metal Base Height: 4.2" – 5.2").
• Montage mural : Recommended if the flood level is above the base, also suitable for flood-prone areas.
• Trolley Mounting: Improves portability of the system (only one battery module can be installed for trolley installation).

Installation Steps (Power Dock)

The Power Dock (200A ATS) must be installed by a qualified electrician. The installation involves:

1. Locating the ATS box with a marking template.
2. Drilling holes and mounting the ATS box.
3. Wiring the ATS box to the main electrical panel.
4. Connecting the Power Dock to the E10 system.

For detailed visual instructions, please refer to the official installation videos below.

Installation Steps (E10 Power Module & Battery Modules)

The E10 Power Module and B6000 Battery Modules are designed for modular stacking. Ensure proper alignment and secure connections.

1. Place the bottom battery module on a flat, hard surface.
2. Remove the bottom rubber plug from the second battery module onward (keep the plug intact on the bottom-most battery).
3. Stack the battery modules. Up to five battery modules can be installed for floor installation. For three or more batteries, install an extra fixed bracket with the third battery for stability.
4. Install the fixed bracket on the topmost battery module.
5. Align ports and mount the E10 Power Module on top of the stacked batteries.
6. Lock the modules by fastening the screws on both sides to complete the installation.

Note: Use caution to prevent injury when mounting the power module. These screws may strip easily; align them vertically and tighten slowly.

Mode d'emploi

The Anker SOLIX E10 with Power Dock provides seamless power management for your home.

Device Setup (App)

1. Hold the power button on the E10 Power Module for 3 seconds to turn it on. The module will automatically enter networking mode.
2. Download the latest Anker app from the App Store (iOS devices) or Google Play (Android devices), or by scanning the QR code provided in the Quick Start Guide.
3. Log in to your Anker account or create a new one.
4. From the app homepage, select the Devices page, then tap Add Devices.
5. Select "Anker SOLIX E10" from the detected devices.
6. To complete the Bluetooth connection, press the IoT button on the device.
7. Choose "Power Independently" to use E10 as a power station with AC outlets, or "Build a Power System" for smart energy flow through your home.
8. Connect to your 2.4 GHz Wi-Fi network.
9. Update the firmware to ensure optimal performance and stability.

Alimenter vos appareils

• Utilisation quotidienne: Connect the power strip (sold separately) to the power module. Make sure the power module is turned on before powering your devices.
• During a Grid Outage: Connect the included 240V output cable to the power module, then connect it to the transfer switch.

Seamless Automatic Switchover

The Power Dock enables an automatic switchover in less than 20 milliseconds, ensuring no interruption during power outages. This protects your home appliances from power-return surges and provides continuous power.

Gestion intelligente de l'énergie

The Anker app allows for intelligent power management, including 12-circuit smart prioritization. You can customize priorities in the app to automatically protect essential circuits and extend backup time during extended outaget.

Charge et recharge

The Anker SOLIX E10 system offers multiple recharging methods to ensure your batteries are always ready.

Recharging via Anker SOLIX Smart Generator 5500

Use the DC charging cable (included with the generator) to connect your E10 to the Smart Generator. Ensure the generator circuits are enabled via the app and proper configuration to prevent electric shock.

Other Recharging Methods

• Via a Wall Outlet: Use a 120V AC charging cable to recharge your battery modules.
• Via a Third-Party Generator: Use an Anker SOLIX E10 AC Generator Adapter (sold separately) to recharge your battery modules via a third-party generator.
• Par le biais de panneaux solaires : Connect each solar panel to a set of photovoltaic ports. Ensure the photovoltaic switch is set to OFF before connecting. Photovoltaic voltage must not exceed 450V. If the cable is not long enough, use an Anker SOLIX Solar Panel Extension Cable. Switch the photovoltaic connection selector to the ON position after connecting.

Note: If your power module connects to a PV system (over 165V) on or in a building, NEC requires a rapid shutdown function to protect emergency personnel from electric shock.

Entretien

Regular maintenance ensures the longevity and optimal performance of your Anker SOLIX E10 system. Keep the units clean and free from debris. Periodically check all cable connections for tightness and signs of wear. Ensure proper ventilation around the units to prevent overheating. For any complex maintenance, contact qualified service personnel.

Dépannage

If you encounter issues with your Anker SOLIX E10 system, refer to the following common troubleshooting tips:

• Aucune puissance de sortie : Check if the power module is turned on and if all circuit breakers are in the ON position. Verify cable connections.
• Problèmes de connectivité des applications : Ensure your phone is within Bluetooth range during initial setup and that the E10 is connected to a stable 2.4 GHz Wi-Fi network. Restart the app and the E10 module if necessary.
• Chargement lent : Verify that the charging source (wall outlet, generator, solar panels) is providing adequate power and that all charging cables are securely connected. Check for any error messages in the Anker app.
• Surchauffe du système : Ensure adequate clearance around the units for proper ventilation. Check for any obstructions to airflow.

For persistent issues, consult the detailed troubleshooting section in the full user manual or contact Anker customer support.

Caractéristiques

Garantie et assistance

The Anker SOLIX E10 Power Module comes with a 5-year warranty, and the Power Dock comes with a 10-year warranty. For any product inquiries, technical support, or warranty claims, please contact Anker customer support.

Professional installation services are available and recommended for the Anker SOLIX E10 with Power Dock system. Contact AnkerDirect for expert support and pre-screened licensed electricians with transparent rates.

Des plans de protection supplémentaires, tels qu'un plan de protection de 4 ans, peuvent être disponibles à l'achat.