Introduction
This instruction manual provides comprehensive guidance for the Cuifati RCM Charger Dongle. This device is designed to inject payloads such as Atmosphere, Reinx, and SXOS into compatible systems, supporting full operating system versions. Please read this manual carefully before use to ensure proper operation and to maximize the device's functionality.
Image : Une face view of the Cuifati RCM Charger Dongle, showing its compact design and USB-C connector.
Contenu du colis
Vérifiez que tous les éléments énumérés ci-dessous sont inclus dans votre colis :
- 1 x RCM Charger Dongle
- 1 x câble USB
- 1 x Short Connector (Jig)
Image: The RCM Charger Dongle, its USB cable, and the short connector (jig) included in the package.
Caractéristiques
| Type d'article | RCM Charger |
| Matériel | ABS |
| Couleur | As shown in images (typically black with red/blue accents) |
| Dimensions | Environ 3.6 x 3.4 x 1.3 cm (1.4 x 1.3 x 0.5 pouces) |
| Poids | Environ 24.9 g |
| Compatibilité | Supports all versions and regions of the compatible system. Supports firmware updates for OS operating systems. |
| Pre-loaded Payloads | ATMOSPHERE, REINX, SXOS |
The RCM Charger Dongle is built with high-quality ABS material, ensuring durability and stable performance. Its compact and lightweight design makes it portable and easy to carry.
Setup: Connecting the RCM Charger Dongle
Follow these steps to connect the RCM Charger Dongle and enter RCM mode:
- Insert the RCM Charger Dongle: Insert the RCM Charger Dongle into the compatible device. The LED indicator on the dongle will light up for approximately 10 seconds, indicating it is charging, and then turn off completely.
- Install the Short Connector (Jig): Carefully install the short connector into the right Joy-Con rail of your device.
- Enter RCM State: While holding down the Volume + button, press and hold the Power button on your device. This action will put your device into RCM (Recovery Mode) state. The RCM Charger Dongle will automatically inject the payload.
Image : Un gros plan view of the short connector (jig) properly inserted into the device's right Joy-Con rail.
Image: The RCM Charger Dongle next to the short connector (jig), illustrating the components used for setup.
Operating Instructions: Payload Delivery
Once your device is in RCM state, follow these steps to deliver the desired payload:
- Initiate Payload Delivery: With the RCM Charger Dongle inserted, the LED will light up for 10 seconds. To select a payload, press and hold the button on the dongle. The LED will flash 4 times, indicating payload selection.
- Payload Indicator Colors: The color of the flashing LED corresponds to the selected payload program:
- Bleu: ATMOSPHÈRE
- Vert: REINX
- Rouge: SXOS
Adding or Replacing Payload.bin Files
To update or change the payload.bin file on your RCM Charger Dongle:
- Connectez-vous à l'ordinateur : Use the provided MicroUSB cable to connect the RCM Charger Dongle to your computer.
- Access as USB Drive: Your computer will automatically recognize the dongle as a USB flash drive.
- Update Payload: Copy and paste the desired payload.bin file into the dongle's storage to update it.
Image : Côté view of the RCM Charger Dongle, highlighting the MicroUSB port used for connecting to a computer to manage payload files.
Entretien
To ensure the longevity and optimal performance of your Cuifati RCM Charger Dongle, follow these simple maintenance guidelines:
- Nettoyage: Use a soft, dry cloth to gently wipe the exterior of the dongle. Avoid using liquid cleaners or abrasive materials.
- Stockage: Conservez le dongle dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
- Manutention: Handle the dongle and its connectors with care to prevent physical damage. Avoid bending or forcing the USB-C connector.
- Mises à jour du micrologiciel : Regularly check for official firmware updates for your device's operating system to ensure compatibility and performance.
Dépannage
If you encounter issues with your RCM Charger Dongle, refer to the following common troubleshooting steps:
- Dongle LED does not light up: Ensure the dongle is fully inserted into the device's USB-C port. If it still doesn't light up, try charging the dongle using the provided USB cable and a power source.
- Device does not enter RCM mode:
- Verify that the short connector (jig) is correctly inserted into the right Joy-Con rail.
- Ensure you are pressing and holding the Volume + button avant en appuyant sur le bouton Power.
- Confirm your device is powered off before attempting to enter RCM mode.
- Payload not injecting or incorrect payload selected:
- Ensure the dongle is fully charged.
- Press and hold the button on the dongle to cycle through payloads and observe the LED color.
- If updating payload.bin, ensure the file is correctly copied to the dongle when connected to a computer.
- Computer does not recognize dongle as USB drive: Try a different USB port or cable. Ensure the dongle is properly connected to the computer.
Si ces étapes ne résolvent pas votre problème, veuillez contacter le service client pour obtenir de l'aide supplémentaire.
Garantie et assistance
Pour obtenir des informations sur la garantie et l'assistance technique, veuillez consulter la documentation fournie avec votre achat ou visiter le site officiel de Cuifati. webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.
