HAIBOXING 1:18 Scale RC Car Bundle Instruction Manual

1. Introduction

This manual provides essential information for the safe operation, setup, and maintenance of your HAIBOXING 1:18 Scale RC Car Bundle. This bundle includes two distinct models: the 18859 brushed truck and the 18859A brushless truck. Please read this manual thoroughly before operating your RC vehicles to ensure proper function and longevity.

Image: The HAIBOXING 18859 and 18859A RC trucks in action on an off-road surface.

2. Précautions de sécurité

Operating remote control vehicles requires caution. Failure to follow safety guidelines can result in injury or damage to the product or property.

• Utilisez toujours la voiture télécommandée dans des espaces ouverts, loin des personnes, des animaux domestiques et des obstacles.
• Do not operate near public roads, power lines, or water bodies.
• Gardez les mains, les cheveux et les vêtements amples éloignés des pièces mobiles.
• Ensure batteries are charged correctly and handled according to their instructions. Improper battery use can lead to fire or explosion.
• Ne touchez pas le moteur ou le contrôleur de vitesse électronique (ESC) immédiatement après utilisation, car ils peuvent être chauds.
• La surveillance d'un adulte est recommandée pour les utilisateurs de moins de 14 ans.
• The vehicles are splash-waterproof (IPX4), but not fully submersible. Avoid deep water.

3. Contenu du colis

Vérifiez que tous les éléments énumérés ci-dessous sont présents dans votre colis :

• HAIBOXING 18859 Brushed RC Truck (1:18 Scale)
• HAIBOXING 18859A Brushless RC Truck (1:18 Scale)
• 2.4 GHz Remote Controller (for each truck)
• Rechargeable Li-Po Battery Packs (multiple included for extended runtime)
• USB Chargers (for Li-Po batteries)
• Additional Truck Shell (for customization, typically with brushless model)
• Manuel d'utilisation

Image : Terminéview of the HAIBOXING RC Car Bundle contents, including both trucks, remote controllers, batteries, and chargers.

4. Produit terminéview

The HAIBOXING RC Car Bundle offers two high-performance 1:18 scale 4WD off-road vehicles, each with distinct characteristics.

4.1. Model 18859 (Brushed Truck)

• Moteur: High-torque 380 brushed motor
• Vitesse: Up to 36 KPH (22 mph)
• Caractéristiques: Independent suspension, classic ball bearings, metal drivetrain components, high-grip off-road tires.

4.2. Model 18859A (Brushless Truck)

• Moteur: 2435 KV3300 brushless motor
• Vitesse: Up to 48 KPH (30 mph)
• Fonctionnalités améliorées : Enhanced Ackerman steering system, aluminum oil-filled shocks, full metal gears, 3-wire metal gear servo.

4.3. Caractéristiques communes

• Conduire: Full 4WD capability
• Électronique: IPX4 splash-waterproof ESC and receiver
• Châssis: Solid chassis design for stability
• Contrôle: Proportional 2.4 GHz radio system
• Durabilité: Flexible yet strong PVC/PA66 bodies, built-in ESC protections (over-current, overheat, anti-block, low-voltage coupure).

Image: Detailed diagram of the shaft drive 4WD chassis, highlighting key components such as the 380 brushed motor, splash waterproof ESC, Li-Po battery, adjustable shock absorbers, and high-grip knobby tires.

Image: Illustration of the upgraded components in the brushless version, including the brushless ESC and motor, full aluminum oil shocks, steel gear differential/spur gears, steel drive shafts, and a 3-wire metal gear servo.

5. Installation

5.1. Charging the Li-Po Battery

1. Connect the Li-Po battery to the provided USB charger.
2. Branchez le chargeur USB à une source d'alimentation USB compatible (par exemple, un port USB d'ordinateur, un adaptateur secteur USB).
3. The charger's indicator light will show the charging status (refer to charger's specific instructions for light patterns).
4. Une fois la batterie complètement chargée, débranchez-la du chargeur. Ne la surchargez pas.

5.2. Installation de la batterie du véhicule

1. Remove the body shell from the RC truck.
2. Securely place the charged Li-Po battery into the battery compartment.
3. Connect the battery connector to the ESC connector. Ensure correct polarity.
4. Remettez en place la coque.

5.3. Installation des piles de l'émetteur

1. Open the battery compartment on the bottom of the remote controller.
2. Insert the required batteries (typically AA, not always included) according to the polarity markings.
3. Fermez le couvercle du compartiment à piles.

5.4. Transmetteur surview and Binding

The 2.4 GHz transmitter provides proportional control. If the truck and transmitter are not already bound, follow these steps:

1. Allumez l'émetteur.
2. Allumez le camion télécommandé.
3. The transmitter and receiver should automatically bind. If not, refer to the specific binding instructions in the small manual included with the product.

Image: The 2.4GHz full-function proportional remote control system, illustrating the steering wheel, trigger, power switch, battery compartment, and speed switch.

Image : détaillée view of the 2.4GHz transmitter, labeling controls such as Steering Wheel (1), Throttle Trigger (2), Battery Compartment (3), Steering Trim (4), Steering Reverse (5), Power Indicator (Low Power) (6), ON/OFF Power Switch (7), Steering D/R (8), Speed Tuning (9), Throttle Reverse (10), Power Indicator (Full Power) (11), and Bind/Mode (12).

6. Mode d'emploi

6.1. Contrôles de base

• Gâchette d'accélérateur : Pull to accelerate forward. Push to brake, then push again for reverse.
• Volant: Tournez à gauche ou à droite pour diriger le véhicule.
• Speed Switch (on transmitter): Adjusts the maximum speed of the vehicle. Use lower speeds for beginners or in confined spaces.

6.2. Conseils de conduite

• Commencez par des vitesses lentes pour vous familiariser avec les commandes.
• Entraînez-vous à diriger et à contrôler l'accélérateur dans un espace dégagé.
• Évitez les arrêts brusques ou les virages à grande vitesse pour éviter les renversements.
• Monitor battery levels. Performance will decrease as the battery drains.
• The IPX4 rating means the electronics are protected against splashes. Avoid driving through deep puddles or submerging the vehicle.

Image: The HAIBOXING RC truck demonstrating its off-road capability, highlighting the 2KG torque proportional metal gear servo and high-grip knobby tires.

7. Entretien

Regular maintenance ensures optimal performance and extends the lifespan of your RC vehicles.

• Nettoyage: After each use, especially off-road, clean dirt and debris from the chassis, suspension, and wheels using a soft brush or compressed air. Avoid using water directly on electronics.
• Inspection: Regularly check for loose screws, damaged parts, or worn tires. Tighten screws as needed.
• Lubrification: Periodically lubricate moving parts like universal joints and gears with RC-specific grease or oil.
• Entretien de la batterie: Store Li-Po batteries in a cool, dry place at a storage voltage (typically around 3.8V per cell) if not used for extended periods. Never fully discharge or overcharge Li-Po batteries.
• Remplacement de pièces : All replacement parts are available for purchase. Refer to the parts diagram (if included) for specific part numbers.

8. Dépannage

If you encounter issues, refer to the common problems and solutions below:

9. Spécifications

10. Garantie et assistance

HAIBOXING products are designed for durability and performance. For any issues not covered in the troubleshooting section, or for inquiries regarding replacement parts, please contact HAIBOXING customer support. All replacement parts are generally available for purchase through authorized retailers.

Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.