OOYCYOO 80 Amp Manuel d'utilisation du contrôleur de charge solaire MPPT

1. Introduction

This manual provides essential information for the safe and efficient operation of your OOYCYOO 80 Amp MPPT Solar Charge Controller. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your solar power system. This controller is designed to maximize power harvest from your solar panels and efficiently charge various battery types in 12V, 24V, 36V, and 48V systems.

2. Consignes de sécurité

Respectez toujours les consignes de sécurité suivantes lors de l'installation et du fonctionnement :

• Ensure all connections are secure and correct polarity is maintained to prevent damage to the controller, batteries, or solar panels.
• Install appropriate circuit breakers for each line (solar array, battery, load) to protect against overcurrent.
• Évitez de court-circuiter les bornes.
• Do not attempt to disassemble or repair the controller yourself. Refer to qualified personnel.
• Installez le contrôleur dans un endroit bien ventilé, à l'écart des matériaux inflammables et de la lumière directe du soleil.
• Portez un équipement de protection individuelle (EPI) approprié lors de l'installation.

3. caractéristiques du produit

• Efficient 80A MPPT Technology: Compatible avec le volume du système 12 V/24 V/36 V/48 V.tages, featuring Maximum Power Point Tracking (MPPT) technology with tracking efficiencies up to 99% and peak conversion efficiencies up to 98%.
• Compatibilité étendue avec les batteries : Supports various 12/24/36/48V battery types, including Lead-acid (Sealed, Gel, AGM, Flooded) and Lithium batteries.
• Protection complète : Built-in PV array short-circuit protection, PV input over-current protection, load short-circuit protection, PV polarity reversal protection, battery polarity reversal protection, over-temperature protection, Lithium battery low temperature protection, night reverse charging, battery over voltage, and load overload.
• Vol élevétagAssistance e/Power : Accepte le vol solairetage up to 150V. Max input power: 1000W (12V system), 2000W (24V system), 3000W (36V system), 4000W (48V system).
• Système de refroidissement double : Constructed with die-cast aluminum for excellent heat dissipation and reduced power consumption. Features an upgraded turbofan fan for efficient cooling (activates at >45°C, turns off <40°C).
• Écran LCD : Provides real-time energy statistics and operating data for easy monitoring.

4. Contenu du colis

Le forfait comprend généralement :

• OOYCYOO 80 Amp Contrôleur de charge solaire MPPT
• Matériel de montage (vis, chevilles)
• Câble du capteur de température
• Manuel d'utilisation

Image: OOYCYOO 80 Amp MPPT Solar Charge Controller with included mounting hardware, temperature sensor, and manual.

5. Configuration et installation

Suivez ces étapes pour une installation correcte :

1. Montage du contrôleur :

   Mount the controller vertically on a wall or sturdy surface in a well-ventilated area, ensuring ample space for heat dissipation. Use the provided screws and wall anchors. Ensure controllers are at the same horizontal level with ample space for heat dissipation between devices if installing multiple units.

   

   Video: Demonstrates mounting the controller on a wall using screws.

2. Séquence de câblage :

   Always connect in the following order: Battery > Solar Array > LoadDéconnectez dans l'ordre inverse.

   • Connectez la batterie : Connect the battery positive and negative terminals to the controller's battery terminals. Ensure correct polarity.
   • Connect the Solar Array: Connect the solar panel positive and negative terminals to the controller's solar array terminals. Ensure correct polarity.
   • Connectez la charge : Connectez votre charge CC aux bornes de charge du contrôleur.
   

   Image: A diagram illustrating the correct wiring sequence for the solar charge controller, connecting solar panels, battery, and load.

   Video: Demonstrates the wiring process for the MPPT solar charge controller, connecting to a battery and a load.

3. Connecter le capteur de température : Plug the temperature sensor cable into the designated port on the controller. This ensures accurate temperature compensation for battery charging.
4. Mise à la terre : Properly ground the controller to prevent electrical hazards.
5. Parallel Installation (Optional): If installing multiple controllers in parallel, connect them using the parallel communication cable.

   Video: Guide on assembling and connecting the parallel communication cable for multiple MPPT controllers.

6. Mode d'emploi

6.1. Écran LCDview

The LCD display provides real-time information about your solar system. Use the buttons below the screen to navigate through different parameters.

Image : détaillée view of the MPPT Solar Charge Controller's LCD display and various connection ports, including Solar Panel, Battery, Load, USB, Remote Temp Sensor, and RS485 Communication Port.

6.2. Sélection du type de batterie

The controller supports automatic recognition of system voltage (12V/24V/36V/48V). You can manually select the battery type (Lead-acid, Gel, AGM, Flooded, Lithium) through the LCD interface to optimize charging parameters.

Image: Illustrates the controller's compatibility with various battery types (GEL, AGM, USER, SEL, FLD, LI, LiFePO4) and a typical three-stage charging curve (Bulk Charge, Constant Charging, Float Charge).

6.3. Fonctionnement parallèle

When operating multiple controllers in parallel, ensure the main controller is configured first. Slave controllers will automatically synchronize their configurations with the main controller.

7. Entretien

• Vérifiez régulièrement le serrage et l'absence de corrosion de tous les raccordements électriques.
• Keep the controller's cooling fins and fan vents clear of dust and debris to ensure efficient heat dissipation.
• Check the LCD display periodically for any error codes or unusual readings.
• Ensure the battery terminals are clean and free of oxidation.

8. Dépannage

8.1. Problèmes courants et solutions

• Pas d'affichage/Pas d'alimentation : Check battery connections and ensure the battery circuit breaker is closed. Verify battery voltage est dans la plage de fonctionnement.
• La batterie ne charge pas : Vérifiez les connexions des panneaux solaires et assurez-vous qu'ils reçoivent suffisamment de lumière solaire. Vérifiez le volume des panneaux solaires.tage is within the controller's input range. Confirm correct battery type selection.
• Vol élevétage Avertissement : This may occur if the solar array's open circuit voltage (Voc) exceeds the controller's maximum input voltage (150V). Reconfigure your solar array to stay within limits.
• Battery Management System (BMS) Shutdown: If your lithium battery's BMS has shut down due to low voltage, it may need activation.

Video: Provides methods to reactivate a 12V or 24V lithium battery if its Battery Management System (BMS) has shut down.

9. Spécifications

10. Garantie et assistance

For warranty information, technical support, or service inquiries, please contact OOYCYOO customer service directly. Refer to the product packaging or the official OOYCYOO website pour les coordonnées.