TizzyToy MT22

Manuel d'utilisation du drone GPS TizzyToy MT22

Comprehensive instructions for operating and maintaining your TizzyToy MT22 GPS Drone.

1. Introduction

Thank you for choosing the TizzyToy MT22 GPS Drone. This manual provides essential information for the safe operation, setup, and maintenance of your drone. Please read it thoroughly before your first flight to ensure proper usage and to maximize your flying experience.

The TizzyToy MT22 is a lightweight, foldable GPS drone equipped with dual 4K UHD cameras, designed for both beginners and experienced pilots. Key features include:

  • Under 249g Weight: No FAA registration or Remote ID required in many regions.
  • GPS Auto Return-to-Home (RTH): Ensures safe return in case of low battery or signal loss.
  • Maintien de l'altitude : Maintains a stable hover for easier control.
  • Deux caméras 4K UHD : Capture high-resolution photos and videos with a 90° adjustable lens.
  • FPV WiFi 5 GHz : Real-time video transmission to your mobile device.
  • Durée de vol prolongée : Up to 50 minutes with two modular batteries.
  • Transmission longue portée : Reliable control up to 2,625 feet.
  • Moteurs sans balais : Provide stable flight and require minimal maintenance.
TizzyToy MT22 Drone being placed into a pocket, illustrating its compact size and light weight.

Image 1.1: The TizzyToy MT22 drone's compact, foldable design allows it to fit easily into a pocket, highlighting its portability and lightweight nature (under 249g).

2. Consignes de sécurité

Operating a drone requires responsibility. Adhere to the following safety guidelines to prevent accidents and ensure a pleasant flying experience.

  • Réglementations locales : Always check and comply with local laws and regulations regarding drone operation before flying. While this drone is under 249g and may not require FAA registration in some regions, other local rules may apply.
  • Vérification avant vol : Before each flight, ensure the drone, remote controller, and batteries are in good condition and fully charged.
  • Conditions environnementales : Do not fly in strong winds (the drone has Level 5 wind resistance, but extreme conditions should be avoided), heavy rain, snow, or fog. Maintain visual line of sight with the drone.
  • Zone de vol : Fly in open areas, away from people, animals, buildings, and obstacles. Avoid flying over crowds or private property.
  • Sécurité des batteries : Use only original batteries and chargers. Do not overcharge or puncture batteries. Discontinue use if batteries show signs of damage or swelling.
  • Sécurité de l'hélice : Keep hands and face away from rotating propellers. Ensure propellers are correctly installed and free from damage before flight.
  • Procédures d'urgence: Familiarize yourself with the Return-to-Home (RTH) function and emergency stop procedures.
A child flying the TizzyToy MT22 drone with an adult supervising, showing safety features like Geo-Fencing, One-Key Return, Signal-Loss Return, and Low Battery Return.

Image 2.1: The TizzyToy MT22 drone incorporates multiple safety features, including Geo-Fencing, One-Key Return, Signal-Loss Return, and Low Battery Return, enhancing flight safety and ease of use.

3. Contenu du colis

Veuillez vérifier que tous les articles sont présents dans votre colis :

  • TizzyToy MT22 GPS Drone
  • Télécommande
  • Batteries de vol intelligentes (x2)
  • Hélices de rechange (jeu)
  • Tournevis
  • Câbles de chargement USB (x3)
  • Mallette de transport
  • Manuel de l'utilisateur (ce document)
All components of the TizzyToy MT22 GPS Drone package laid out, including the drone, remote controller, two batteries, spare propellers, screwdriver, charging cables, and carrying case.

Image 3.1 : Terminéview of the TizzyToy MT22 GPS Drone package contents, showing the drone, remote, batteries, and accessories.

4. Guide de configuration

4.1 Dépliage du drone

  1. Place the drone on a flat surface with the camera facing forward.
  2. Gently unfold the front arms until they lock into position.
  3. Unfold the rear arms until they lock into position.

4.2 Installation des hélices

The drone comes with propellers pre-installed. If replacement is needed:

  1. Identifiez les hélices et les moteurs marqués « A » et « B ».
  2. Match the 'A' propellers to 'A' motors and 'B' propellers to 'B' motors.
  3. Use the provided screwdriver to secure the propellers with the small screws. Ensure they are firmly attached but not overtightened.

4.3 Chargement des batteries

Fully charge both the drone's intelligent flight batteries and the remote controller battery before first use.

  • Batterie de drone: Connect the drone battery to a USB power adapter (not included) using the provided USB charging cable. The indicator lights on the battery will show charging status. Charging typically takes 3-4 hours. The battery features auto power-off after full charge.
  • Batterie de la télécommande: Connect the remote controller to a USB power adapter using its dedicated USB charging cable. The indicator light on the remote will show charging status.

4.4 Installing Drone Battery and SD Card

  1. Slide the fully charged intelligent flight battery into the battery compartment on the rear of the drone until it clicks into place.
  2. If using an SD card (not included), insert it into the SD card slot on the drone's body. Ensure the card is inserted correctly according to the diagram near the slot.

4.5 Pairing Remote Controller and App Connection

  1. Power on the drone by pressing the power button once, then pressing and holding it until the indicator lights illuminate.
  2. Allumez la télécommande.
  3. The drone and remote controller should automatically pair. If not, refer to the specific pairing instructions in the quick start guide or app.
  4. Download the TizzyToy FPV app from your mobile device's app store.
  5. Connect your mobile device to the drone's 5G WiFi network (usually named "TizzyToy_XXXXXX").
  6. Open the TizzyToy FPV app to view the live camera feed and access advanced flight functions.

5. Mode d'emploi

5.1 Vérifications avant vol

  • Assurez-vous que les batteries du drone et de la télécommande sont complètement chargées.
  • Vérifiez que les hélices ne sont pas endommagées et assurez-vous qu'elles sont bien fixées.
  • Verify the flight environment is clear of obstacles and people.
  • Confirm GPS signal acquisition (indicated by solid green lights on the drone or in the app).
  • Ensure your mobile device is connected to the drone's WiFi and the app is functioning correctly.

5.2 Décollage et atterrissage

  1. Démarrage du moteur : Push both control sticks on the remote controller down and outwards simultaneously to start the motors.
  2. Décoller:
    • Décollage manuel : Poussez lentement le joystick gauche (manette des gaz) vers le haut pour monter.
    • Décollage en une seule touche : Press the dedicated One-Key Take-off button on the remote or in the app. The drone will automatically ascend to a safe height.
  3. Atterrissage:
    • Atterrissage manuel : Slowly pull the left joystick (throttle) downwards until the drone lands.
    • Atterrissage en une seule touche : Press the dedicated One-Key Landing button on the remote or in the app. The drone will automatically descend and land.

5.3 Commandes de vol de base

  • Joystick gauche (accélérateur/lacet) :
    • Haut/Bas : Monter/Descendre
    • Left/Right: Rotate drone left/right (Yaw)
  • Joystick droit (Avant/Arrière/Gauche/Droite) :
    • Up/Down: Fly forward/backward (Pitch)
    • Left/Right: Fly left/right (Roll)

5.4 fonctions GPS

  • Mode GPS: The drone defaults to GPS mode when sufficient satellites are acquired, providing stable hovering and precise positioning.
  • Retour à domicile (RTH) :
    • RTH intelligent : Initiated by pressing the RTH button on the remote or in the app. The drone will return to its recorded home point.
    • Batterie faible RTH : Automatically triggered when the drone's battery is critically low.
    • Perte de signal RTH : Automatically triggered if the connection between the drone and remote controller is lost.
  • Maintien de l'altitude : The drone will automatically maintain its current altitude when the throttle stick is centered, allowing for easier control.

5.5 Fonctionnement de la caméra

Close-up of the TizzyToy MT22 drone's dual 4K cameras with optical elements highlighted, indicating 90-degree adjustable UHD imaging.

Image 5.1: The TizzyToy MT22 features dual 4K UHD cameras with a 90-degree adjustable lens for versatile aerial photography and videography.

  • Photo/Vidéo : Utilisez les boutons dédiés de la télécommande ou de l'application pour prendre des photos ou démarrer/arrêter l'enregistrement vidéo.
  • Réglage de l'angle de la caméra : The camera lens can be adjusted by 90° via the remote controller or app to capture different perspectives.
  • FPV (Première personne) View): The 5G WiFi transmission allows for real-time video feed to your connected mobile device via the TizzyToy FPV app.
  • Stockage sur carte SD : Footage can be stored directly onto an inserted SD card (up to 128GB, Class 10 or higher recommended) for higher quality recordings.

5.6 Modes de vol intelligents

Illustrations of the TizzyToy MT22 drone's smart flight modes: Follow Me, Tap Flight, Orbit Flight, and Gesture Control.

Image 5.2: The TizzyToy MT22 offers multiple smart flight modes, including Follow Me, Tap Flight, Orbit Flight, and Gesture Control, for enhanced creative possibilities.

Access these modes via the TizzyToy FPV app:

  • Suis-moi: The drone will automatically follow the subject (e.g., you with your mobile device).
  • Tap Flight (Waypoint Flight): Touchez des points sur la carte dans l'application, et le drone volera le long du trajet indiqué.
  • Orbit Flight (Point of Interest): Select a central point, and the drone will circle around it at a set radius and altitude.
  • Contrôle gestuel : Effectuez des gestes spécifiques de la main pour déclencher l'enregistrement de photos ou de vidéos.

6. Entretien

Regular maintenance ensures the longevity and optimal performance of your TizzyToy MT22 drone.

  • Nettoyage: Use a soft, dry cloth to clean the drone body, camera lens, and motors after each flight. Avoid using liquids or solvents.
  • Inspection de l'hélice : Regularly check propellers for cracks, bends, or other damage. Replace damaged propellers immediately using the provided spare parts and screwdriver.
  • Entretien de la batterie:
    • Conservez les piles dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
    • Do not fully discharge batteries for extended periods. Charge them to about 50-60% for long-term storage.
    • Si une batterie gonfle ou présente des signes de dommages, cessez de l'utiliser et jetez-la correctement.
  • Stockage: Lorsqu'il n'est pas utilisé, pliez le drone et rangez-le dans son étui de transport pour le protéger de la poussière et des dommages physiques.

7. Dépannage

If you encounter issues with your TizzyToy MT22 drone, refer to the following common problems and solutions:

ProblèmeCause possibleSolution
Le drone ne s'allume pas.Batterie non chargée ou mal installée.Ensure battery is fully charged and correctly inserted. Press and hold power button to turn on.
Remote controller fails to connect.Remote battery low; pairing failed.Charge remote controller. Re-attempt pairing process as per section 4.5.
Pas de signal GPS.Flying indoors; insufficient satellites.Fly outdoors in an open area. Wait for the drone to acquire sufficient GPS satellites (indicated by solid green lights).
Vol instable/Dérive.Improper calibration; strong winds; damaged propellers.Perform gyroscope and compass calibration (refer to app instructions). Avoid flying in strong winds. Check and replace damaged propellers.
Pas de flux vidéo FPV.Mobile device not connected to drone's WiFi; app not open.Ensure your phone is connected to the drone's 5G WiFi network and the TizzyToy FPV app is open.
Camera not recording/taking photos.No SD card; SD card full or corrupted; insufficient permissions.Insert a compatible SD card. Format the SD card via the app. Check app permissions on your mobile device.

8. Spécifications

FonctionnalitéDétail
MarqueTizzyJouet
ModèleMT22
PoidsUnder 249g (No FAA registration required in many regions)
Dimensions (plié)Approximately 2.54 x 2.54 x 2.54 cm (1 x 1 x 1 inch) - Note: This dimension seems unusually small for a folded drone, likely a placeholder or error in source data. Actual folded dimensions would be larger.
Durée de vol maximaleUp to 50 minutes (with 2 batteries, 25 mins per battery)
Plage de transmission maximale2,625 pieds (environ 800 mètres)
CaméraDual 4K UHD, 90° Adjustable Lens
Transmission FPVWi-Fi 5G
Type de moteurMoteur sans balais
Emplacement pour carte SDYes (Card not included, supports up to 128GB)
Caractéristiques GPSAuto Return-to-Home (RTH), Altitude Hold
Résistance au ventNiveau 5
The TizzyToy MT22 drone flying with an overlay indicating '50 Mins Max Flight' and two battery icons, each representing 25 minutes.

Image 8.1: The TizzyToy MT22 drone offers a maximum flight time of 50 minutes, achieved with two intelligent flight batteries, each providing approximately 25 minutes of flight.

The TizzyToy MT22 drone flying with an overlay indicating '2625 Feet' for transmission range and '394 ft Altitude'.

Image 8.2: The TizzyToy MT22 drone boasts a reliable transmission range of up to 2,625 feet, allowing for extensive exploration.

The TizzyToy MT22 drone flying above a house with palm trees, indicating 'Level 5 Wind Resistance'.

Image 8.3: The TizzyToy MT22 drone features Level 5 wind resistance, enabling stable flight even in moderate wind conditions.

9. Garantie et assistance

Specific warranty details are not provided within this manual. For information regarding warranty coverage, technical support, or service, please refer to the documentation included with your purchase or contact TizzyToy customer service directly through their official website ou le détaillant où le produit a été acheté.

Documents connexes - MT22

Préview Manuel d'utilisation du GPS iTracksafeX - Installation, configuration et dépannage
Manuel d'utilisation complet pour les traceurs GPS iTracksafeX. Ce manuel couvre l'installation, les schémas de câblage, les commandes SMS, la configuration du suivi en ligne, l'utilisation de l'application mobile et le dépannage pour les modèles suivants : MT-1X, MT5B, A1X, MT-1C, MT21, MT5A, MT-1, MT22, VT600X et VT1000.
Préview Instructions de démontage des ordinateurs portables et tablettes HP en fin de vie
Ce document fournit des instructions pour le démontage des ordinateurs portables et tablettes HP destinés aux recycleurs ou aux centres de traitement en fin de vie. Il détaille les composants et les matériaux nécessitant un traitement sélectif conformément à la directive européenne 2012/19/CE.
Préview HP mt22 Mobile Thin Client (11D09EA) - Product Overview et spécifications
Explore the HP mt22 Mobile Thin Client, a secure, stylish, and affordable device designed for cloud productivity. Features Intel Celeron processor, ThinPro OS, robust security, and business-class performance.
Préview Série Mearth RS : Trottinettes électriques longue autonomie par excellence | Caractéristiques et spécifications
Découvrez les Mearth RS et Mearth RS Pro, trottinettes électriques longue autonomie par excellence. Explorez leurs caractéristiques, spécifications, autonomie, vitesse et protections intelligentes pour vos trajets quotidiens.
Préview DFM Diagnostic List v5.00 - Vehicle Systems and Functions
Comprehensive diagnostic list for DFM vehicles, detailing system functions, ECU information, DTC reading/erasing, data stream, and actuation tests for various models including DFLZ, Joyear, BX5, BX3, BS3, A60, A30, AX7, L60, Mini-car, and DFSK series. This document outlines the capabilities of diagnostic tools for different vehicle modules and systems.
Préview Rapport de test FCC du moteur de système de store enrouleur Zemismart - Modèle MT25B
Rapport de test FCC du pilote de système de store enrouleur Zemismart, modèle MT25B, détaillant les émissions conduites et rayonnées, la puissance de sortie, la bande passante et les exigences d'antenne. Testé par Shenzhen Anbotek Compliance Laboratory Limited.