1. Introduction
Thank you for choosing the VONROC 10L Electric Pressure Sprayer. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new sprayer. Please read these instructions carefully before use and keep them for future reference.
This electric pressure sprayer is designed for various applications including gardening, weed control, and sanitation tasks. Its built-in 4V battery and USB-C charging offer convenient, continuous spraying without manual pumping.
2. Consignes de sécurité
Respectez toujours les consignes de sécurité de base lors de l'utilisation d'appareils électriques afin de réduire les risques d'incendie, d'électrocution et de blessures.
- Lisez toutes les instructions: Familiarize yourself with the controls and proper use of the sprayer.
- Équipement de protection individuelle : Always wear appropriate personal protective equipment (PPE) such as safety glasses, gloves, and protective clothing, especially when spraying chemicals.
- Ventilation: Use the sprayer in well-ventilated areas, especially when using chemical solutions.
- Sécurité chimique : Follow the instructions and safety warnings provided by the chemical manufacturer. Do not spray flammable liquids, strong acids, or corrosive substances.
- Chargement : Use only the provided USB-C charging cable. Do not charge the battery in damp conditions or near flammable materials.
- Enfants et animaux domestiques : Gardez le pulvérisateur et les produits chimiques hors de portée des enfants et des animaux domestiques.
- Stockage: Rangez le pulvérisateur dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures négatives.
- Entretien: Disconnect the sprayer from the power source before performing any maintenance or cleaning.
3. Produit terminéview
The VONROC 10L Electric Pressure Sprayer comes with several key components designed for ease of use and versatility.
Figure 1 : Surview of the VONROC 10L Electric Pressure Sprayer, highlighting the 10L tank, fill level indicator, shoulder straps, LED indicator, adjustable nozzle, and two spray lances (short and long).
- 10 Liter Tank: Large capacity tank with a visible fill level indicator for easy monitoring.
- Bretelles : Two wide straps for comfortable backpack-style carrying, ideal for extended use.
- Pompe électrique : Integrated 4V electric pump for continuous, consistent spraying without manual effort.
- Buse réglable : Allows adjustment from a powerful jet stream to a fine mist spray.
- Spray Lances: Includes both a short and a long lance for various spraying needs and reach.
- Indicateur LED : Provides status information, typically for battery charge or operation.
- 1.5 Meter Hose: Provides extended reach and flexibility during operation.
Figure 2 : Close-up of the sprayer handle, showing the USB-C charging port and the included charging cable.
Figure 3 : The sprayer handle displayed with both the short and long spray lances, which can be interchanged based on application requirements.
4. Installation
4.1 Chargement de la batterie
- Locate the USB-C charging port on the sprayer handle (refer to Figure 2).
- Connectez le câble de chargement USB-C fourni au port.
- Branchez l'autre extrémité du câble USB-C à un adaptateur secteur USB compatible (non inclus) ou à un port USB.
- The LED indicator will show the charging status. Ensure the battery is fully charged before first use for optimal performance.
4.2 Assemblage
- Attacher les bretelles : Securely attach the two wide shoulder straps to the designated points on the sprayer tank. Adjust them for a comfortable fit when worn as a backpack.
- Raccorder le tuyau : Connect the 1.5-meter hose to the sprayer tank outlet and the sprayer handle inlet. Ensure connections are tight to prevent leaks.
- Fixer la lance de pulvérisation : Choose either the short or long spray lance and securely attach it to the end of the sprayer handle (refer to Figure 3).
- Fixer la buse : Screw the adjustable nozzle onto the end of the chosen spray lance.
5. Mode d'emploi
5.1 Remplissage du réservoir
- Assurez-vous que le pulvérisateur est éteint et que la zone est dégagée.
- Dévissez le bouchon du réservoir.
- Carefully pour the desired liquid (water, fertilizer, weed killer, etc.) into the 10-liter tank. Do not overfill beyond the maximum fill line.
- Observe the fill level indicator on the side of the tank.
- Securely screw the tank cap back on to prevent leaks.
5.2 Pulvérisation
- Wear appropriate PPE as per the chemical manufacturer's instructions.
- Turn on the sprayer using the power switch, usually located on the handle. The LED indicator may illuminate.
- Réglage de la buse : Rotate the adjustable nozzle at the end of the lance to change the spray pattern from a fine mist to a powerful jet stream, depending on your application needs.
- Initiate Spraying: Press the trigger on the sprayer handle to begin spraying. The electric pump will provide a continuous and even spray.
- Stop Spraying: Relâchez la gâchette pour arrêter la pulvérisation.
- After use, turn off the sprayer.
6. Entretien
6.1 Nettoyage
- After each use, especially when spraying chemicals, thoroughly clean the sprayer.
- Vider tout liquide restant dans le réservoir.
- Fill the tank with clean water and spray it through the lance and nozzle until the tank is empty. Repeat this process several times to flush out all residues.
- Nettoyez l'extérieur du pulvérisateur avec de l'eau.amp cloth. Do not immerse the electrical components in water.
- Remove and clean the nozzle and lance separately if they become clogged.
6.2 Stockage
- Ensure the sprayer is clean and dry before storage.
- Store the sprayer in a cool, dry, and frost-free location, away from direct sunlight.
- Keep the sprayer out of reach of children and unauthorized persons.
- For long-term storage, ensure the battery is partially charged (around 50%) to prolong its lifespan. Recharge every few months if not in use.
7. Dépannage
If you encounter issues with your sprayer, refer to the following common troubleshooting steps:
| Problème | Cause possible | Solution |
|---|---|---|
| Le pulvérisateur ne s'allume pas. | La batterie est déchargée. | Chargez la batterie à l'aide du câble USB-C. |
| Pas de pulvérisation ou pulvérisation faible. |
|
|
| Fuites au niveau des connexions. | Connexions desserrées ou joints endommagés. | Tighten all connections. Inspect seals for damage and replace if necessary. |
If the problem persists after trying these solutions, please contact VONROC customer support.
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | PS508DC |
| Marque | VONROC |
| Volume du réservoir | 10 litres |
| Source d'énergie | Battery Powered (4V built-in battery) |
| Chargement | USB-C |
| Longueur du tuyau | 1.5 mètres |
| Dimensions du produit | 18.6 x 18.6 x 39.3 cm |
9. Garantie et assistance
VONROC products are manufactured to high quality standards. In the unlikely event that you experience a defect due to material or manufacturing faults, please contact your retailer or the VONROC customer service department directly.
Please retain your proof of purchase (invoice or receipt) for any warranty claims. The warranty period and conditions are subject to the terms and conditions of the retailer and manufacturer at the time of purchase.
For further assistance, technical support, or to inquire about spare parts, please visit the official VONROC webconsultez le site ou contactez leurs services d'assistance clientèle.
