VCELINK RJ45 1-Port Surface Mount Box Instruction Manual

1. Produit terminéview

The VCELINK RJ45 1-Port Surface Mount Box provides a flexible solution for installing network cables in various locations such as walls, desktops, or office furniture. This box is designed to house a single RJ45 keystone jack, offering a clean and dustproof network connection point. It is compatible with UTP 90/180 degree RJ45 keystone jacks and supports CAT6, CAT5E, and CAT5 network cables.

2. Ce qui est inclus

Chaque package contient les composants suivants :

5 x 1-Port Surface Mount Boxes
10 x vis de montage
10 x Attaches de câble
5 rubans adhésifs double face

Contents of the VCELINK RJ45 1-Port Surface Mount Box package, showing five boxes, mounting screws, double-sided tape, and cable ties.

Image: Package contents including surface mount boxes, screws, tape, and cable ties.

Note: Keystone jacks are not included and must be purchased separately.

3. Spécifications

Marque	VCELINK
Numéro de modèle	A166-1A-5P-CA
Type de connecteur	RJ45
Compatibilité des types de câbles	Ethernet (Cat6, Cat5e, Cat5)
Appareils compatibles	Cric Keystone
Maximum Cable Outer Diameter	6.2 mm (0.24 pouces)
Matériel	Acrylonitrile butadiène styrène (ABS)
Couleur	Blanc
Dimensions du produit	2.21 x 1.81 x 1.07 pouces
Nombre d'unités	Paquet de 5

Diagram showing the dimensions of the VCELINK RJ45 1-Port Surface Mount Box: 56.2mm/2.21in length, 46mm/1.81in width, and 27.3mm/1.07in height.

Image : Dimensions du produit.

Close-up image of the surface mount box with a flame effect, highlighting its construction from high impact and flame retardant ABS plastic.

Image: Construction material (ABS plastic).

4. Guide d'installation

This section provides step-by-step instructions for installing the VCELINK RJ45 1-Port Surface Mount Box. You can choose between screw mounting or using double-sided adhesive tape.

4.1 Tutoriel vidéo

Video: How to install the RJ45 keystone jack into the surface mount box.

4.2 Instructions étape par étape

Préparez la boîte : Gently pry up the cap of the surface mount box using a flat-head screwdriver or similar tool to access the interior.
Insert Keystone Jack: Ensure the keystone jack is oriented correctly (usually with the 'UP' arrow or label facing upwards). Insert the keystone jack into the opening in the base of the surface mount box until it clicks securely into place. The keystone jack should be held firmly.

An RJ45 keystone jack being inserted into the base of the surface mount box, with an arrow indicating the 'UP' direction.

Image: Inserting the keystone jack into the box base.

Acheminement du câble : If your network cable has a larger diameter, you may need to remove the pre-scored section at the rear of the box to accommodate it. The maximum cable outside diameter supported is 6.2 mm.

Diagram showing the rear of the surface mount box with a section marked for removal to accommodate cables up to 6.2mm in diameter.

Image: Removing the cable exit section for thicker cables.

Secure the Cable (Optional): Use the provided cable tie to secure the network cable to the internal cable management post within the box. This helps prevent strain on the keystone jack connection.
Mount the Box (Screws): Position the box on your desired surface. Use the two provided mounting screws to securely fasten the box to the wall or surface.
Mount the Box (Adhesive Tape): Alternatively, peel the backing from the double-sided adhesive tape and apply it to the back of the surface mount box. Press the box firmly onto a clean, dry, and smooth surface for secure adhesion.
Fermez le bouchon : Once the keystone jack is installed and the box is mounted, carefully align and snap the top cap back onto the base until it is fully closed.

5. Mode d'emploi

After successful installation, the VCELINK RJ45 1-Port Surface Mount Box functions as a standard network port.

Connexion d'un appareil : Simply plug a standard RJ45 Ethernet cable from your network device (e.g., computer, printer, gaming console) into the keystone jack on the surface mount box.
Déconnexion d'un appareil : To disconnect, press the release tab on the RJ45 connector and gently pull the cable out of the keystone jack.

Three images showing the VCELINK RJ45 surface mount box in use: one on a desk connected to a laptop, another on a wall with multiple cables, and a third on a floor near a plant, demonstrating various installation scenarios.

Image : Examples of the surface mount box in various installations.

6. Entretien

The VCELINK RJ45 1-Port Surface Mount Box requires minimal maintenance.

Nettoyage: Use a soft, dry cloth to wipe the exterior of the box. Avoid abrasive cleaners or solvents.
Inspection: Periodically check the box and cable connections for any signs of damage or loose fittings.
Keystone Replacement: The design allows for easy replacement of the keystone jack if needed. To replace, gently pry open the cap, then carefully push the keystone jack out from the front using a small tool. Insert a new keystone jack and reassemble.

An image illustrating the reusability of the keystone jack, showing a keystone being removed from the surface mount box for replacement or upgrade.

Image: Keystone jack can be easily replaced.

7. Dépannage

Keystone Jack Does Not Fit: Ensure you are using a standard UTP 90/180 degree RJ45 keystone jack. Some overly long female-to-female couplers may not fit.
Cable Does Not Fit Through Opening: The maximum supported cable outer diameter is 6.2 mm. If your cable is thicker, ensure the removable section at the rear of the box has been detached.
Box Not Sticking with Tape: Ensure the mounting surface is clean, dry, and smooth. For rough or uneven surfaces, screw mounting is recommended.
Connexion lâche : Verify that the keystone jack is fully snapped into the box and that the Ethernet cable is securely plugged into the keystone jack.

8. Garantie et assistance

VCELINK products are designed for reliability and performance. For specific warranty details and technical support, please refer to the official VCELINK website or contact customer service directly. Contact information is typically available on the product packaging or the manufacturer's website.

VCELINK offers 24/7 friendly customer service to assist with any product-related inquiries or issues.

	Guide d'utilisation de l'outil de sertissage RJ45 VCELINK GJ671BL Instructions étape par étape pour utiliser l'outil de sertissage VCELINK GJ671BL afin d'assembler des connecteurs RJ45 pour câbles réseau, y compris CAT5 et CAT7.
	Brochure produit VCELINK 2026 - Accessoires et outils de réseau Découvrez la brochure complète des produits VCELINK 2026 présentant une vaste gamme d'accessoires réseau, d'outils et de solutions audiovisuelles de haute qualité. Vous y trouverez notamment des connecteurs RJ45, des pinces à sertir, des testeurs, des solutions de gestion de câbles, des plaques murales et bien plus encore, pour une utilisation professionnelle ou domestique.
	Brochure produit VCELINK 2025 : Outils et accessoires de mise en réseau Découvrez la brochure complète des produits VCELINK 2025, présentant une vaste gamme d'outils réseau, de connecteurs, de câbles, de plaques murales et d'accessoires audio/vidéo de haute qualité, conçus pour les professionnels et les bricoleurs. Trouvez des solutions pour une connectivité fiable et des installations efficaces.
	Brochure des produits de la marque VCELINK 2025 Découvrez la brochure produit VCELINK 2025, qui présente une gamme complète d'accessoires réseau, d'outils manuels et de services. Découvrez des produits de haute qualité conçus pour les professionnels comme pour les bricoleurs, avec une attention particulière portée à l'innovation et à la satisfaction client.
	MSMU-TRX Modular SMU Cable Assemblies - Tektronix Tektronix MSMU-TRX Modular SMU Cable Assemblies: detailed specifications, part numbers, model numbers, and safety precautions for connecting SMU modules to test equipment. Includes characteristics and application notes.

VCELINK A166-1A-5P-CA