Informations importantes sur la sécurité
Veuillez lire attentivement ce manuel avant l'installation et l'utilisation. Conservez ce manuel pour toute consultation ultérieure.
- Capacité de poids : Ne pas dépasser la capacité de charge maximale de 15 kg (33 lb). Le dépassement de cette limite peut entraîner des blessures graves ou des dommages matériels.
- Taille du moniteur : The monitor arm supports monitors up to 42 inches. The VESA extender supports monitors from 17 to 35 inches. Ensure your monitor's size and weight are within these limits.
- Compatibilité VESA : The arm supports VESA patterns 75x75mm and 100x100mm. The extender converts these to 200x100mm and 200x200mm. Verify your monitor's VESA pattern before installation.
- Épaisseur du bureau : Le C-clamp requires a desk thickness between 0.39 inches (10mm) and 2.76 inches (70mm). Ensure your desk can support the combined weight of the arm, monitor, and extender.
- Assemblée: Assemblez le produit conformément aux instructions. Un assemblage incorrect peut entraîner des dommages matériels ou des blessures graves.
- Pièces mobiles: This product contains moving parts. Exercise caution during adjustment to avoid pinching or crushing injuries.
- Entretien: Periodically check all screws and connections to ensure they are secure. Retighten as necessary.
Contenu du colis
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, please contact MOUNTUP customer support.
- Assemblage du bras du moniteur
- Cl-Camp Base
- VESA Extender Bracket (2 pieces)
- VESA Extender Plate
- Hardware Kit (screws, washers, spacers, Allen wrenches)
Image : Terminéview of the MOUNTUP Heavy Duty Single Monitor Arm, including the main arm, C-clamp, and the VESA extender components.
Caractéristiques
| Marque | MONTAGE |
| Modèle | Heavy Duty Single Monitor Arm with VESA Extender |
| Monitor Arm Compatibility | Monitors up to 42 inches |
| VESA Extender Compatibility | Monitors 17-35 inches |
| Capacité de poids | 4.4 - 33 lbs (2 - 15 kg) |
| VESA Patterns (Arm) | 75x75mm, 100x100mm |
| VESA Patterns (Extender) | Converts to 200x100mm, 200x200mm, 150x150mm, 100x200mm |
| Épaisseur du bureau (C-Cl)amp) | 0.39 - 2.76 pouces (10 - 70 mm) |
| Plage de hauteur | 9.3 à 22.1 pouces |
| Extension maximale | 23.8 pouces |
Image: Illustration highlighting the monitor arm's robust load capacity of up to 33 lbs.
Image: Diagram showing the monitor arm's height adjustment range from 9.3 to 22.1 inches and a maximum extension of 23.8 inches.
Configuration et installation
Step 1: Install the C-Clamp Base
- Placez le C-clamp base on the edge of your desk.
- Ensure the desk thickness is between 0.39 and 2.76 inches.
- Serrer le C-clamp screw until the base is securely fastened to the desk. Do not overtighten.
Image: The monitor arm's C-clamp securely attached to a desk, demonstrating its stable mounting.
Image: A visual comparison highlighting the wider and more stable design of the MOUNTUP C-clamp compared to a standard clamp.
Step 2: Assemble the VESA Extender (if needed)
If your monitor has a VESA pattern larger than 100x100mm (e.g., 200x100mm or 200x200mm), use the VESA extender bracket.
- Attach the two extender brackets to the VESA extender plate using the provided screws. Ensure the ridge on the extender plate aligns with the brackets for a secure fit.
- Securely fasten the extender assembly to your monitor's VESA mounting holes using the appropriate screws from the hardware kit.
Image: Step-by-step visual guide for assembling the VESA extender brackets onto the main plate using screws.
Image : Une image détaillée view of the VESA extender plate, showing its design for adapting to various VESA patterns.
Image: A diagram illustrating the various VESA patterns (200x100mm, 150x150mm, 200x200mm, 100x200mm) supported by the extender.
Image: A visual comparison showing a monitor that previously could not be mounted (before) and how the VESA extender enables mounting for larger VESA patterns (after).
Étape 3 : Fixer le moniteur au bras
- Slide the monitor (with or without the VESA extender attached) onto the VESA head of the monitor arm.
- Secure the monitor to the VESA head using the provided screws. Ensure all screws are tightened to prevent the monitor from detaching.
Mode d'emploi
Réglage de la position du moniteur
The MOUNTUP monitor arm allows for flexible adjustment of your monitor's position to achieve optimal ergonomics.
- Réglage de la hauteur : Gently push or pull the monitor up or down to the desired height. The gas spring mechanism will hold it in place.
- Réglage de l'inclinaison : Tilt the monitor screen up or down to reduce glare and find a comfortable viewangle de vue.
- Ajustement pivotant : Rotate the monitor horizontally (left or right) to share your screen or change viewdirection.
- Ajustement rotatif : Faites pivoter le moniteur de 360 degrés pour basculer entre l'orientation paysage et portrait.
Réglage de la tension
If the monitor arm is too stiff or too loose, you may need to adjust the gas spring tension.
- Locate the tension adjustment screw on the arm (usually near the pivot points).
- Use the provided Allen wrench to turn the screw:
- Tourner sens horaire (-) à réduire tension (for lighter monitors or if the arm is too stiff).
- Tourner sens antihoraire (+) à augmenter tension (pour les moniteurs plus lourds ou si le bras s'affaisse).
- Adjust gradually and test the arm's movement after each adjustment until it holds your monitor securely at any position.
Entretien
- Nettoyage: Wipe the monitor arm and VESA extender with a soft, damp Chiffon. Évitez d'utiliser des nettoyants abrasifs ou des solvants qui pourraient endommager la finition.
- Contrôles périodiques : Regularly inspect all screws and connections (C-clamp, VESA plate, arm joints) to ensure they remain tight. Retighten any loose fasteners to maintain stability and safety.
- Lubrification: The gas spring mechanism is maintenance-free and does not require lubrication.
Dépannage
Monitor Sags or Does Not Hold Position
- Solution: The gas spring tension is likely too low for your monitor's weight. Increase the tension by turning the adjustment screw counter-clockwise (+) with the provided Allen wrench until the arm can hold the monitor in place.
- Vérifier le poids : Ensure your monitor's weight is within the 4.4 - 33 lbs capacity.
Arm is Too Stiff to Move
- Solution: The gas spring tension is likely too high. Decrease the tension by turning the adjustment screw clockwise (-) with the provided Allen wrench.
Monitor Wobbles
- Solution: Check if the C-clamp is securely tightened to the desk. Ensure all VESA mounting screws are tight. Verify that the monitor arm joints are properly secured.
- Stabilité du bureau : Ensure your desk itself is stable and not prone to wobbling.
Garantie et assistance
MOUNTUP products are designed for durability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official MOUNTUP website.
If you encounter any issues or have questions regarding the installation or operation of your MOUNTUP Heavy Duty Single Monitor Arm and VESA Extender, please contact MOUNTUP customer support for assistance.
Coordonnées: Please refer to your product packaging or the MOUNTUP official webConsultez ce site pour obtenir les coordonnées les plus récentes du service client.
