1. Introduction
Thank you for choosing the HYPERLITE 8 Foot LED Linear Strip Light Fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1 : Terminéview of the HYPERLITE 8 Foot LED Linear Strip Light Fixture.
2. Consignes de sécurité
AVERTISSEMENT : Risque de choc électrique. Coupez l’alimentation avant toute installation ou intervention.
- L'installation doit être effectuée par un électricien qualifié, conformément aux normes électriques nationales et locales.
- Assurer le vol d'alimentationtage est compatible avec les exigences du luminaire (120-277V).
- Do not handle the fixture with wet hands or when standing on wet surfaces.
- Ne modifiez en aucun cas le dispositif. Toute modification non autorisée peut annuler la garantie et engendrer des risques pour la sécurité.
- Assurez-vous que toutes les connexions sont sécurisées et correctement isolées.
- Ce luminaire est conçu pour une utilisation en intérieur uniquement.
3. Contenu du colis
Vérifiez que tous les composants sont présents avant de commencer l'installation :
- HYPERLITE 8 Foot LED Linear Strip Light Fixture (Quantity as per pack size)
- Manuel d'instructions (ce document)
- J-box adapters (x2)
- Safety Ropes (x2)
- Screws (x6 total for mounting)
- Ancres (x4)
Image 3.1: Included accessories and fixture dimensions.
4. caractéristiques du produit
- Eau réglabletage: Select between 60W, 70W, or 80W to optimize energy consumption and light output.
- Température de couleur sélectionnable (CCT) : Choose from 3500K (Warm White), 4000K (Cool White), or 5000K (Daylight) to suit your environment.
- Haute efficacité : Delivers up to 10400 lumens with an efficiency of 130 lumens per watt.
- Gradable 1-10V : Compatible with 1-10V dimmers for adjustable brightness from 10% to 100%.
- Longue durée de vie : Rated for 50,000 hours of operation, reducing maintenance and replacement costs.
- Construction durable : Made from aluminum for robust performance.
- Certifié UL : Meets high safety and performance standards.
- Installation polyvalente : Supports both surface mount and suspended mount methods.
Image 4.1: Visual representation of selectable color temperatures and wattagles paramètres.
Image 4.2: Details on the screw-lock mechanism for stable suspension and the unique button/buckle design for easy cover removal.
5. Instructions d'installation
Before installation, ensure the power supply is turned off at the circuit breaker.
5.1. Installation en surface
- Préparez la surface de montage : Identify the desired location for the fixture. Mark the drilling points for the mounting screws.
- Trous de forage : Drill pilot holes at the marked locations. Insert anchors if mounting into drywall or other soft materials.
- Attach J-box Adapters: Secure the J-box adapters to the ceiling or wall using the provided screws.
- Câbler le luminaire : Connect the fixture's electrical wires to the building's wiring (Live to Live, Neutral to Neutral, Ground to Ground). Ensure all connections are secure and insulated.
- Monter le luminaire : Align the fixture with the J-box adapters and secure it in place with the remaining screws.
5.2. Installation du support suspendu
- Préparez la surface de montage : Identify the desired location for the fixture. Mark the drilling points for the suspension hardware.
- Install Suspension Hardware: Secure the ceiling hooks or other suspension hardware (not included, but compatible with safety ropes) into the ceiling structure.
- Attach Safety Ropes: Connect the safety ropes to the fixture's designated attachment points. The screw-lock mechanism ensures stable suspension.
- Ajuster la hauteur : Adjust the length of the safety ropes to achieve the desired hanging height.
- Câbler le luminaire : Connect the fixture's electrical wires to the building's wiring (Live to Live, Neutral to Neutral, Ground to Ground). Ensure all connections are secure and insulated.
Image 5.1: Illustration of the two available installation methods: Surface Mount and Suspended Mount.
6. Mode d'emploi
The HYPERLITE LED Linear Strip Light Fixture features external switches for adjusting wattage and color temperature (CCT).
6.1. Réglage de l'eautage et température de couleur
The CCT and wattage switches are located on the fixture's housing. These can be adjusted without disassembling the fixture.
- Localiser les interrupteurs : Identify the small toggle switches on the side of the fixture. One switch controls wattage (60W, 70W, 80W) and the other controls CCT (3500K, 4000K, 5000K).
- Sélectionnez le paramètre souhaité : Use a small tool (e.g., a screwdriver) to slide the switches to your preferred wattage et température de couleur.
- Mise sous tension : Restore power to the fixture to see the changes.
Image 6.1: Location and operation of the CCT and wattage commutateurs de sélection.
6.2. Dimming Function (1-10V)
This fixture supports 1-10V dimming. To utilize this feature, you will need a compatible 1-10V dimmer switch (not included) wired into your electrical system.
- Install 1-10V Dimmer: Have a qualified electrician install a 1-10V dimmer switch according to its instructions and local electrical codes.
- Connect Dimming Wires: Connect the fixture's dimming wires to the corresponding wires from the 1-10V dimmer.
- Régler la luminosité : Use the 1-10V dimmer to adjust the light output from 10% to 100%.
Image 6.2: Visual demonstration of the 1-10V dimming range from 10% to 100% brightness.
7. Entretien
The HYPERLITE LED Linear Strip Light Fixture requires minimal maintenance.
- Nettoyage: Assurez-vous que l'appareil est hors tension avant de le nettoyer. Essuyez-le avec un chiffon doux, sec ou légèrement humidifié.amp chiffon. Ne pas utiliser de produits chimiques agressifs, de nettoyants abrasifs ni de solvants.
- Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and contact a qualified electrician or HYPERLITE support.
- LED: The LEDs are integrated and not user-replaceable. The long lifespan of the LEDs means replacement should not be necessary under normal operating conditions.
8. Dépannage
Si vous rencontrez des problèmes avec votre luminaire, consultez les problèmes courants et leurs solutions ci-dessous :
| Problème | Cause possible | Solution |
|---|---|---|
| L'appareil ne s'allume pas | Pas d'alimentation électrique Connexion de câblage desserrée Fixation défectueuse | Vérifiez le disjoncteur et l'interrupteur mural. Vérifiez que toutes les connexions des câbles sont bien fixées (assurez-vous d'abord que l'alimentation est coupée). Contact HYPERLITE support if power is confirmed and connections are good. |
| Light output is too dim or too bright | Mot incorrecttage réglage Dimmer setting too low/high | Ajustez le wattage switch on the fixture. Adjust the 1-10V dimmer to the desired brightness level. |
| La température de couleur n'est pas celle attendue | Réglage CCT incorrect | Adjust the CCT switch on the fixture to 3500K, 4000K, or 5000K. |
| Lumière vacillante | Gradateur incompatible Câblage desserré Voltagles fluctuations | Ensure a 1-10V dimmer is used. If not, replace with a compatible dimmer. Vérifiez tous les branchements électriques (alimentation coupée). Consultez un électricien pour vérifier la stabilité de l'alimentation électrique. |
9. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Numéro de modèle | HP-SP-BF02 |
| Dimensions (L x l x H) | 96" x 2.09" x 2.59" |
| Quoitage | 60 W / 70 W / 80 W (au choix) |
| Rendement lumineux | Jusqu'à 10400 lumens (à 80 W) |
| Efficacité | 130 lm/W |
| Température de couleur (CCT) | 3500K / 4000K / 5000K (au choix) |
| Gradabilité | 1-10V Dimming (10%-100%) |
| Vol d'entréetage | 120-277V AC |
| Durée de vie | 50,000 heures |
| Matériel | Aluminium |
| Certifications | Homologué UL |
| Utilisation intérieure/extérieure | Utilisation en intérieur uniquement |
| Poids unitaire (paquet de 8) | 49.9 livres |
10. Garantie et assistance
10.1. Informations sur la garantie
This HYPERLITE LED Linear Strip Light Fixture is covered by a Garantie de 5 ans from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, abuse, accidents, or unauthorized modifications.
Veuillez conserver votre preuve d'achat pour les réclamations au titre de la garantie.
10.2. Assistance clientèle
For technical assistance, warranty claims, or any questions regarding your HYPERLITE product, please contact our customer support team. Refer to the contact information provided with your purchase or visit the official HYPERLITE website.
When contacting support, please have your model number (HP-SP-BF02) and purchase date ready.
