Introduction
The Dormakaba IC800 BLE Digital Door Lock combines advanced technology with robust security. Featuring a high-strength anti-sawing lock body and a lifting handle anti-lock function, it ensures enhanced protection against tampering. This versatile lock supports multiple access methods, including card/RFID fob, PIN code, fingerprint, and mechanical key, providing flexible and convenient entry options. Its integrated BLE technology enables remote control and monitoring via a mobile app. Equipped with an alarm system, it alerts users to unauthorized attempts or security breaches. The sleek, durable design is ideal for modern homes and offices, ensuring both style and peace of mind.
Figure 1 : Devant view of the Dormakaba IC800 BLE Digital Door Lock, showcasing le clavier et la poignée.
Configuration et installation
This section provides general guidance for setting up your Dormakaba IC800 BLE Digital Door Lock. For detailed installation, please refer to the comprehensive installation guide included in your product packaging.
Contenu du colis
Avant de commencer l'installation, assurez-vous que tous les composants sont présents :
- Dormakaba IC800 BLE Digital Door Lock unit
- Carte RFID
- Manual Key (2 included)
- Matériel de montage et vis
- Modèle d'installation
- Manuel de l'utilisateur (ce document)
Installation de la batterie
- Repérez le compartiment à piles sur la partie intérieure de la serrure.
- Ouvrez le couvercle de la batterie.
- Insert four (4) 1.5V AA Alkaline batteries, ensuring correct polarity.
- Close the battery cover securely. The lock will emit a voice prompt upon successful power-up.
Programmation initiale
After installation and battery insertion, follow the on-screen prompts or voice guidance to set up the initial master PIN code and register your first fingerprint or RFID card. Refer to the detailed programming section in your installation guide for specific steps.
Mode d'emploi
The Dormakaba IC800 BLE offers multiple convenient ways to access your property.
Modes d'accès
- Reconnaissance des empreintes digitales : Placez votre doigt enregistré sur le capteur d'empreintes digitales. La serrure se déverrouillera une fois la vérification effectuée.
- PIN Code Entry: Touch the keypad to activate it. Enter your registered 4-12 digit PIN code followed by the '#' key. The lock will unlock if the code is correct.
- Carte/porte-clés RFID : Present your registered RFID card or fob to the card reader area on the lock. The lock will unlock upon successful verification.
- Clé mécanique : In case of emergency or battery depletion, insert the mechanical override key into the keyhole and turn to unlock.
- Application mobile (BLE) : Use the dedicated Dormakaba mobile application to remotely unlock the door via Bluetooth Low Energy (BLE) when within range. Ensure your device is paired with the lock.
- Double authentification : For enhanced security, the lock supports a combination of access methods, such as Card/Fingerprint + PIN code. Refer to the app or advanced settings for configuration.
Verrouillage de la porte
- Verrouillage automatique : The lock is configured to automatically lock after a set period once the door is closed.
- Manual Locking (Lifting Handle Anti-Lock): Lift the exterior handle upwards to engage the deadbolt for additional security. This function provides an extra layer of manual security.
Entretien
Un entretien approprié garantit la longévité et les performances optimales de votre serrure de porte numérique.
Remplacement de la batterie
The lock will emit a low-battery alarm when the battery level is critical. Replace all four (4) AA Alkaline batteries promptly to avoid loss of functionality. Refer to the "Battery Installation" section for replacement steps.
Nettoyage
Nettoyez les surfaces extérieures de la serrure, y compris le clavier et le lecteur d'empreintes digitales, avec un chiffon doux et sec. Évitez d'utiliser des nettoyants abrasifs, des solvants ou des produits chimiques agressifs, car ils pourraient endommager la finition et les composants électroniques.
Alimentation de secours
If the batteries completely deplete before replacement, you can provide emergency power via a USB Type-C cable connected to an external power bank. Locate the USB Type-C port on the exterior unit, typically at the bottom.
Dépannage
This section addresses common issues you might encounter with your Dormakaba IC800 BLE Digital Door Lock.
| Problème | Cause possible | Solution |
|---|---|---|
| La serrure ne répond pas / Pas d'alimentation | Piles épuisées | Replace batteries or use emergency USB Type-C power. |
| Empreinte digitale non reconnue | Finger is wet/dirty; Fingerprint not registered; Sensor is dirty | Ensure finger is clean and dry. Re-register fingerprint if necessary. Clean the fingerprint sensor. |
| Le code PIN ne fonctionne pas | Incorrect PIN entered; PIN not registered | Verify the PIN code. Re-register the PIN code if necessary. |
| La carte RFID ne fonctionne pas | Card not registered; Card damaged | Ensure the RFID card is registered. Try another registered card. |
| Low-battery alarm sounds | Les piles sont faibles | Replace all four (4) AA Alkaline batteries immediately. |
| Tamper/Break-in alarm sounds | Unauthorized attempt to open or damage the lock | Investigate the cause of the alarm. The alarm will typically reset after a period or upon successful authorized entry. |
Caractéristiques
Below are the key technical specifications for the Dormakaba IC800 BLE Digital Door Lock.
Figure 2 : Detailed specifications table for the Dormakaba IC800 BLE Digital Door Lock, including hardware, storage, and app features.
| Fonctionnalité | Détail |
|---|---|
| Marque | dormakaba |
| Nom du modèle | IC 800 BLE |
| Type de serrure | Serrure à mortaiser |
| Matériel | Metal (Mortise Full SS-304 anti-sawing lock body) |
| Couleur | Bronze rouge |
| Dimensions (L x l x H) | 7.7 x 15 x 33.3 centimètres |
| Poids de l'article | 4.9 kilogrammes |
| Modes d'accès | App-enabled (BLE), Card/RFID Fob, PIN code, Fingerprint, Mechanical Key, Double Authentication |
| Capacité d'empreinte digitale | Jusqu'à 100 |
| Capacité de la carte RFID | Jusqu'à 100 |
| Capacité du code PIN | Up to 50 (4–12 digits) |
| Mobile Device Capacity | Up to 10 via BLE |
| Source d'énergie | 4 piles alcalines AA 1.5 V |
| Alimentation de secours | USB Type-C |
| Caractéristiques spéciales | Alarm (tamper, break-in, low-battery), Fingerprint, Fob Unlock, Touchscreen, Voice Guidance, Lifting Handle Anti-Lock |
| Utilisations recommandées | Homes, Offices, Storage Units |
Figure 3 : Côté view of the Dormakaba IC800 BLE Digital Door Lock, illustrating the robust mortise lock mechanism.
Informations sur la garantie
The Dormakaba IC800 BLE Digital Door Lock comes with a Garantie de 1 ans from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty card included with your product.
Assistance clientèle
For technical assistance, troubleshooting, or warranty inquiries, please contact Dormakaba customer support.
- Fabricant: Dormakaba India Private Limited
- Importateur/Emballeur : Buildpro Technologies India Pvt.Ltd
- Renseignements généraux : enquiry.india@dormakaba.com
- Website: www.dormakaba.com/in-fr
When contacting support, please have your product model (IC800 BLE) and purchase details readily available.
