Introduction
The FeiyuTech SCORP 3 Kit is a professional-grade gimbal stabilizer designed for DSLR and mirrorless cameras, offering advanced stabilization and intelligent features. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device to ensure optimal performance.
Les principales caractéristiques comprennent :
- Upgraded 7.72lbs payload capacity for heavier camera setups.
- Detachable underslung handle for versatile shooting angles and remote control.
- Built-in AI Tracking 4.0 for intelligent subject tracking without external accessories.
- Widened quick release plate for faster and more secure camera mounting, supporting vertical shooting.
- Comprehensive accessory kit for enhanced functionality.
Qu'y a-t-il dans la boîte
The FeiyuTech SCORP 3 Kit includes the following components:
- Feiyu Scorp 3 Gimbal x1
- Étui de transport x1
- Lumière d'appoint x1
- Weight Reducing Shoulder Strap x1
- Pôle d'extension x1
- Articulating Arm x1
- Câble de contrôle de caméra USB-C vers Type-C x1
- Câble de chargement USB-C pour nacelle stabilisée x1
- Trépied x1
- Support en L (plaque de montage horizontale) x1
- Curseur x1
- Support de lentille x1
- Plaque de dégagement rapide supérieure x1
- Vis de support d'objectif x1
- Vis de fixation pour caméra x1
- Rubber Dust Cover x1
- Clé hexagonale x1
Installation
1. Gimbal Assembly
Unfold the gimbal and ensure all axis locks are disengaged before powering on. Attach the mini tripod to the bottom of the gimbal handle for stability during setup.
2. Montage de la caméra
- Attach the quick release plate to the bottom of your camera using the camera mounting screw.
- Slide the camera with the attached quick release plate onto the gimbal's mounting platform.
- Secure the camera by tightening the locking lever on the quick release system.
3. Équilibrage du cardan
Proper balancing is crucial for optimal performance and to prevent motor strain. Follow these steps for each axis:
- Équilibre de l'axe d'inclinaison : Unlock the tilt axis. Adjust the camera forward or backward on the quick release plate until the camera remains level when tilted.
- Équilibre de l'axe de roulis : Unlock the roll axis. Adjust the horizontal arm left or right until the camera remains level without tilting to either side.
- Équilibre de l'axe panoramique : Unlock the pan axis. Adjust the vertical arm up or down until the camera remains stable when rotated horizontally.
After balancing, ensure all axis locks are re-engaged before powering on the gimbal.
4. Câbles de connexion
Use the provided USB-C to Type-C camera control cable to connect your camera to the gimbal for control functions.
Utilisation du cardan
1. Marche/Arrêt
Press and hold the power button to turn the gimbal on or off. The gimbal will automatically initialize and attempt to balance the camera.
2. Modes de nacelle
The SCORP 3 offers various operating modes accessible via the touchscreen or physical buttons:
- Suivi panoramique (PF) : Camera pans left/right following your hand movements, tilt and roll axes are locked.
- Mode de verrouillage (L) : All three axes are locked, keeping the camera pointed in a fixed direction.
- Mode suivi (F) : Les trois axes suivent les mouvements de votre main.
- Mode POV : Les trois axes suivent les mouvements de votre main, offrant une perspective à la première personne.
- Mode de suivi: Utilizes AI tracking to follow a designated subject.
3. Poignée inférieure amovible
The underslung handle can be detached for remote control or low-angle shooting. It provides a comfortable grip and allows for real-time status monitoring.
4. Suivi par IA 4.0
The built-in AI module allows for intelligent subject tracking. Activate AI tracking via the gimbal's interface or gesture control. The system can track subjects from up to 59 feet away with a 15% wider field of view.
5. Using the Feiyu SCORP App
Connect the gimbal to the Feiyu SCORP app on your smartphone for additional creative tools, firmware upgrades, parameter settings, and somatosensory remote control.
Entretien
1. Chargement de la batterie
The gimbal features a built-in, non-removable battery. Charge the gimbal directly via the Type-C charging port. A full charge provides approximately 14 hours of operation.
2. Nettoyage et stockage
Wipe the gimbal with a soft, dry cloth. Avoid using harsh chemicals. Store the gimbal in its carrying case in a dry, cool place when not in use. Ensure all axes are locked before storage.
Dépannage
1. La nacelle ne s'allume pas
- Assurez-vous que la batterie est suffisamment chargée.
- Vérifiez que le bouton d'alimentation est enfoncé et maintenu enfoncé pendant la durée requise.
2. Unstable Footage
- Re-check the gimbal balance for all three axes. Improper balance is a common cause of instability.
- Ensure all axis locks are fully disengaged during operation.
- Check for any obstructions preventing free movement of the gimbal arms.
3. AI Tracking Issues
- Ensure the subject is within the recommended tracking range (up to 59ft).
- Verify sufficient lighting and clear visibility of the subject.
- Update gimbal firmware via the Feiyu SCORP app.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Dimensions du produit | 9.84 x 6.91 x 13.56 pouces |
| Poids de l'article | 3.02 livres |
| Numéro de modèle de l'article | SCORP 3 Kit |
| Piles | 2 piles 9V requises (incluses) |
| Date de première disponibilité | 25 juin 2025 |
| Fabricant | Société Guilin FeiYu Technology Incorporated |
| Couleur | Noir |
| Taille pliée | 11.77 x 2.59 x 9.95 pouces (rangé et verrouillé) |
| Capacité de charge utile | Jusqu'à 7.72 lb (3.5 kg) |
| Autonomie de la batterie | Environ 14 heures |
Garantie et assistance
For warranty information and technical support, please refer to the official FeiyuTech webou contactez directement leur service client. Conservez votre reçu d'achat pour toute réclamation sous garantie.
