Introduction
The BRITA P1000 3-Way Integrated Water Filtration System offers a convenient and sustainable solution for accessing filtered, cold, and hot water directly from a single tap. This system features high-quality BRITA filtration, capable of processing up to 1,200 liters, effectively reducing chlorine, limescale, and other impurities to enhance water taste and protect your appliances. Its premium stainless steel design provides both functionality and an elegant aesthetic for any modern kitchen.
Image: The BRITA P1000 3-Way Integrated Water Filtration System, showcasing the sleek stainless steel tap and the compact P1000 filter unit.
Consignes de sécurité
Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in property damage or personal injury.
- Coupez toujours l'arrivée d'eau principale avant de commencer toute installation ou opération de maintenance.
- Ensure all connections are tight to prevent leaks. Check for leaks periodically after installation.
- This system is designed for use with high-pressure boilers (2-8.6 bar). Do not use with low-pressure systems.
- Ne pas utiliser avec de l’eau microbiologiquement dangereuse ou de qualité inconnue sans désinfection adéquate avant ou après le système.
- Keep the filter unit away from direct heat sources and freezing temperatures.
- Only use genuine BRITA replacement filters to ensure optimal performance and safety.
Contenu du colis
Vérifiez que tous les composants sont présents avant de commencer l'installation :
- BRITA 3-Way Tap (Square Style, Stainless Steel)
- BRITA P1000 Filter Cartridge
- Filter Head with Smart Filter Change Indicator (LED)
- Mounting Accessories (hoses, connectors, seals, etc.)
Image: A selection of tools and components typically included or required for the installation of the BRITA 3-Way Integrated Water Filtration System.
Configuration et installation
The BRITA P1000 3-Way Integrated Water Filtration System is designed for easy installation under the sink, fitting most kitchens without the need for countertop drilling or electrical connection. Follow these steps for a successful setup:
- Préparez la zone d'installation : Ensure you have sufficient space under your sink. The system requires a mounting hole of ø 35 mm and a minimum distance of 60 mm to the rear wall.
- Couper l'arrivée d'eau : Locate and turn off the main water supply to your kitchen sink.
- Monter le robinet : Insert the 3-way tap into the designated hole on your countertop. Secure it from underneath using the provided mounting accessories.
- Raccorder les tuyaux d'eau : Connect the hot and cold water supply lines to the corresponding inlets on the tap. Connect the filtered water line from the tap to the filter head.
- Install the Filter Head: Secure the filter head to the cabinet wall under the sink. Ensure it is easily accessible for filter changes.
- Insert the P1000 Filter: Insert the BRITA P1000 filter cartridge into the filter head.
- Ouvrir l'arrivée d'eau et tirer la chasse d'eau : Slowly turn the main water supply back on. Open the filtered water tap and let the water run for at least 3 minutes to flush the system and remove any air or carbon fines. Check all connections for leaks.
Pour un guide visuel, veuillez consulter la vidéo d'installation ci-dessous :
Video: Detailed installation guide for the BRITA My Pure water filter tap system, demonstrating step-by-step setup.
Visual aids for installation:
Image: An illustration showing the BRITA P1000 filter unit installed neatly under a kitchen sink, connected to the tap and water supply lines.
Image: A diagram illustrating the connection points of the BRITA filter head and cartridge to the water supply and the 3-way tap under the sink.
Image: A technical drawing showing the dimensions of the BRITA 3-Way Tap, including height, width, base ring diameter, and mounting hole size, crucial for planning installation.
Mode d'emploi
Your BRITA 3-Way Integrated Water Filtration System provides three types of water: filtered, cold, and hot. The tap features separate levers or controls for each function.
- Eau filtrée : Use the dedicated lever (often marked or with a blue indicator) to dispense filtered water.
- Cold & Hot Water: Use the standard mixer lever to dispense unfiltered cold or hot water, just like a conventional kitchen tap.
- Smart Filter Change Indicator: The filter head includes an LED indicator that signals when it's time to replace the filter cartridge. Refer to the maintenance section for details on interpreting the indicator.
Image: The BRITA 3-Way Tap demonstrating the simultaneous dispensing of filtered water from one spout and unfiltered cold/hot water from another, highlighting its versatility.
Image : Un gros plan view of the BRITA tap's smart filter change indicator, showing the LED light that signals filter status.
Entretien
Regular maintenance ensures optimal performance and longevity of your BRITA P1000 system.
Remplacement de la cartouche filtrante
The BRITA P1000 filter cartridge should be replaced periodically, typically every 6-12 months, or when the smart filter change indicator signals. The indicator light will change color (e.g., green to yellow to red) to prompt replacement.
- Turn off the water supply to the filter unit.
- Twist the old filter cartridge counter-clockwise to remove it from the filter head.
- Insert the new BRITA P1000 filter cartridge into the filter head and twist clockwise until it clicks into place.
- Turn the water supply back on and flush the new filter for 3 minutes.
- Reset the smart filter change indicator according to its specific instructions (usually by pressing and holding a button).
Nettoyage
Clean the exterior of the tap and filter unit regularly with a soft, damp Chiffon et détergent doux. Évitez les nettoyants abrasifs ou les solvants qui pourraient endommager la finition.
Dépannage
If you encounter any issues with your BRITA P1000 system, refer to the table below for common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| Low water flow from filtered tap | Cartouche filtrante obstruée | Remplacez la cartouche filtrante. |
| Fuites d'eau au niveau des raccordements | Connexions desserrées ou joints endommagés | Turn off water supply, check and tighten all connections. Replace seals if damaged. |
| Goût/odeur désagréable dans l'eau filtrée | Expired filter cartridge or improper flushing | Replace filter cartridge and flush thoroughly. Ensure proper installation. |
| No water from filtered tap | Water supply off or filter incorrectly installed | Check main water supply and filter unit connections. Reinstall filter if necessary. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Fabricant | BRITA |
| Numéro de modèle | 1043450 |
| Poids du produit | 5.74 kg |
| Dimensions du produit (L x l x H) | 22.7 x 18.1 x 40 cm |
| Couleur | Acier inoxydable |
| Style | Carré |
| Source d'énergie | Manuel |
| Méthode d'installation | Bricolage (faites-le vous-même) |
| Nombre de trous requis | 1 |
| Position de la poignée | Centre |
| Nombre de poignées | 2 |
| Matériau de la poignée | Acier inoxydable |
| Type de montage | Montage sur le pont |
| Caractéristiques spéciales | Filtre à eau intégré |
| Piles requises | Non |
| Capacité | 1.2 Liters (Filter) |
| Méthode de purification | Bloc de carbone |
| Pays d'origine | Allemagne |
Garantie et assistance
For warranty information and customer support, please refer to the documentation included with your product or visit the official BRITA webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.
Vous pouvez également visiter le BRITA Store on Amazon Pour plus de produits et d'informations.
