PetJoy 3 Dog Shock Collar User Manual

Introduction

The PetJoy 3 Dog Shock Collar system is designed to assist in training up to three dogs simultaneously or individually. It features both automatic bark detection and remote-controlled training modes, including beep, vibration, and static stimulation. This manual provides comprehensive instructions for setup, operation, maintenance, and troubleshooting to ensure effective and safe use of the device.

Consignes de sécurité

• This device is intended for training purposes only. Do not use it as a punishment tool.
• Not suitable for aggressive dogs. Consult a professional dog trainer if your dog exhibits aggressive behavior.
• Ne laissez pas le collier sur votre chien plus de 12 heures par jour afin d'éviter les irritations cutanées.
• Examinez régulièrement le cou de votre chien afin de détecter tout signe d'irritation ou de plaie. En cas d'irritation, cessez l'utilisation du produit jusqu'à guérison complète.
• Tenir hors de portée des enfants.
• Ensure proper fit; the collar should be snug but not overly tight.
• Always start with the lowest stimulation level and gradually increase as needed.

Contenu du colis

Veuillez vérifier que tous les éléments énumérés ci-dessous sont inclus dans votre colis :

• 3 x sangles de collier
• 1 x Clicker
• 3 x Shock Collar Receivers
• 1 x télécommande
• 2 x Charging Wires
• 1 x cordon

Image: All components included in the PetJoy 3 Dog Shock Collar package.

Produit terminéview

Familiarize yourself with the main components of your PetJoy training system.

Image: The PetJoy 3 Dog Shock Collar system, including three receiver collars and the remote control.

Télécommande

• Écran d'affichage : Shows battery level, selected dog channel, mode, and intensity level.
• Boutons de mode : Separate buttons for Beep, Vibration, and Static Stimulation.
• Boutons +/- : Adjust intensity levels for Vibration and Static Stimulation.
• Bouton Canal : Switch between dog channels (1, 2, 3) or control all simultaneously.
• Bouton d'alimentation : Turns the remote on/off and activates/deactivates Auto Mode on the receiver.

Collier récepteur

• Points de contact : Deliver static stimulation. Ensure proper contact with the dog's skin.
• Auto Mode Sensor Hole: Detects barking for automatic correction.
• Port de charge : Pour recharger la batterie du récepteur.
• Indicateur LED : Affiche l'état de l'alimentation, l'état de charge et l'activation du mode.

Guide d'installation

1. Chargement des appareils

Before first use, fully charge the remote control and all receiver collars. Use the provided charging cables.

• Connect the charging cable to the charging port on the remote and receivers.
• Plug the USB end into a USB power adapter (not included), computer, or power bank.
• The LED indicator on the receiver will show charging status (e.g., red while charging, green when full). The remote display will show battery icon filling up.
• Charging typically takes 2-3 hours. A full charge provides approximately 90 days of work time for the remote and 30 days for receivers.

Image: Charging the remote and receiver collars.

2. Appairage de la télécommande et des colliers

Each receiver collar needs to be paired with the remote control.

1. Allumez la télécommande.
2. Select the desired channel (1, 2, or 3) for the collar you are pairing using the Channel button.
3. With the receiver collar turned off, press and hold its power button until the LED indicator flashes rapidly.
4. While the receiver LED is flashing, press any mode button (Beep, Vibration, or Shock) on the remote control.
5. If pairing is successful, the receiver LED will stop flashing and remain solid, and the remote will confirm the connection.
6. Repeat for additional collars, selecting a different channel for each.

3. Ajustement du collier

Un ajustement correct est essentiel pour un fonctionnement efficace et sûr.

• Positionnez le récepteur sous le cou de votre chien, juste en dessous du menton.
• Ensure the contact points touch your dog's skin. You may need to trim long fur for better contact.
• Ajustez la sangle de manière à ce qu'elle soit bien ajustée, ne permettant qu'à un seul doigt de se glisser confortablement entre la sangle et le cou de votre chien.
• The collar should not be too loose, as this can cause inconsistent stimulation and rubbing. It should not be too tight, as this can restrict breathing or cause discomfort.

Mode d'emploi

Modes d'entraînement

The PetJoy collar offers four training modes:

• Mode bip : Delivers an audible tone. This is often used as a warning or positive reinforcement signal.
• Mode de vibration : Delivers a non-harmful vibration. Intensity is adjustable from 1-100 levels.
• Mode Choc : Delivers a static stimulation. Intensity is adjustable from 1-100 levels. Always start at the lowest level and increase gradually.
• Mode automatique: The collar automatically detects and corrects barking. It has 5 sensitivity levels and a sequence of corrections (Beep, then Vibration, then Static Stimulation) if barking persists.

Image: Detailed activation sequences for the automatic bark detection mode.

Image: The collar's ability to operate in Auto Mode independently.

Controlling Multiple Dogs

The remote allows you to control up to three collars individually or all at once.

• Utilisez le Bouton de chaîne on the remote to switch between Dog 1, Dog 2, Dog 3, or a universal channel to control all paired collars simultaneously.
• Ensure each collar is paired to a unique channel for individual control.

Image: Controlling multiple dogs with the remote.

Adjusting Sensitivity (Auto Mode)

To adjust the sensitivity of the automatic bark detection mode:

• With the receiver collar turned on, quickly press its power button 3 times.
• The LED indicator will flash a certain number of times to indicate the current sensitivity level (1-5 flashes).
• Continue pressing the power button 3 times in quick succession to cycle through the 5 sensitivity levels. Level 1 is the least sensitive, and Level 5 is the most sensitive.
• Select a sensitivity level appropriate for your dog's barking habits and environment.

Activating/Deactivating Auto Mode

You can turn the automatic bark detection mode on or off via the remote control.

• Ensure the remote and receiver are paired and within range.
• Press and hold the remote control's power button.
• You will hear the receiver beep once to confirm Auto Mode is turned ON, or twice to confirm it is turned OFF.

Entretien

Nettoyage

• Nettoyez régulièrement le collier du récepteur et les points de contact avec un produit nettoyant pour vitres.amp tissu.
• Veillez à ce que les points de contact soient exempts de saleté, de débris ou de corrosion.
• N'utilisez pas de produits chimiques agressifs ou de nettoyants abrasifs.

Entretien de la batterie

• Chargez complètement les appareils avant une longue période d'inactivité.
• Conserver dans un endroit frais et sec.
• Évitez les températures extrêmes, qui peuvent affecter la durée de vie de la batterie.

Imperméabilisation

The receiver collar is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This makes it suitable for use in rainy conditions or during swimming.

Image: The collar's IPX7 waterproof capability.

Dépannage

Caractéristiques

Garantie et assistance

The PetJoy 3 Dog Shock Collar comes with a Garantie d'un an à compter de la date d'achat, couvrant les défauts de fabrication et les dysfonctionnements dans des conditions normales d'utilisation.

For detailed warranty information, technical support, or any inquiries, please refer to the official user guide or contact PetJoy customer service.

Guide officiel de l'utilisateur (PDF) : Télécharger ici

PetJoy Brand Store: Visitez le magasin