Manuels+

FrSky X18R

FrSky Tandem X18R Radio Controller User Manual

Model: X18R

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your FrSky Tandem X18R Radio Controller. The X18R is a 24-channel radio system featuring a built-in TD-ISRM RS dual-band internal RF module, an 800x480 outdoor high brightness touchscreen, and MC18 high-precision Hall-sensor gimbals. Please read this manual thoroughly before using your device to ensure safe and optimal performance.

FrSky Tandem X18R Radio Controller, front view

Figure 1 : Face avant view of the FrSky Tandem X18R Radio Controller.

Précautions de sécurité

Contenu du colis

Vérifiez que tous les éléments sont présents dans votre colis :

Produit terminéview

The FrSky Tandem X18R is designed for precision control and advanced functionality. Key components include:

Diagram of FrSky Tandem X18R controls and ports

Figure 2: Detailed diagram illustrating the front controls and rear ports of the X18R.

Dos view of FrSky Tandem X18R Radio Controller

Figure 3 : Arrière view of the FrSky Tandem X18R, showing the module bay and battery compartment.

Installation

1. Installation de la batterie

The X18R uses an internal battery. To access the battery compartment:

  1. Locate the battery cover on the back of the transmitter (refer to Figure 3).
  2. Faites glisser le loquet pour ouvrir le couvercle.
  3. Carefully connect the battery to the designated connector inside the compartment.
  4. Place the battery securely and close the cover.
Battery compartment of FrSky Tandem X18R

Figure 4 : View of the battery compartment with the cover removed.

FrSky Tandem X18R battery

Figure 5 : Example of the internal battery for the X18R.

2. Chargement de la batterie

Connect the supplied USB Type-C cable to the USB-C port on the transmitter and to a suitable USB power adapter (not included). The charging indicator will show the charging status.

3. Mise sous/hors tension

Press and hold the power button located on the front panel to turn the transmitter on or off. The touchscreen will illuminate upon power-on.

4. External Antenna Installation (Optional)

For enhanced 900M/2.4G LoRa mode performance, external antennas can be connected:

  1. Locate the external LoRa antenna connectors on the top rear of the transmitter.
  2. Carefully screw the external antennas onto the connectors.
900M/2.4G external antenna interface

Figure 6 : Gros plan view of the 900M/2.4G external antenna interfaces.

Mode d'emploi

1. Navigation tactile

The 800x480 touchscreen allows for intuitive interaction with the operating system. Tap icons to select, swipe to navigate menus, and use the physical buttons (SYS, MDL, DISP, RTN) for quick access to common functions.

2. Gimbal Control

The MC18 Hall-sensor gimbals provide precise control. These gimbals feature 10 ball-bearings for smooth movement. The vertical travel limit switch is adjustable from 45° to 60° range.

MC18 Hall-Effect Joystick with 10-ball bearing

Figure 7: Illustration of the MC18 Hall-Effect Joystick with adjustable vertical travel.

3. Switches and Knobs

The X18R is equipped with various switches and two rotary knobs (S1, S2) for auxiliary functions. The switches include:

You can customize the function and position of these switches within the HARDWARE menu of the radio's operating system.

4. Internal RF Module (TD-ISRM RS)

The built-in TD-ISRM RS module supports multiple RF modes, providing super low-latency and long-range control. Ensure your receiver is compatible with the selected RF mode. Refer to the receiver's manual for binding procedures.

5. Baie de module externe

The X18R includes an external module bay on the rear, allowing for the use of additional RF modules or other compatible accessories.

External module bay on the back of the FrSky Tandem X18R

Figure 8: Close-up of the external module bay.

6. Ports de connectivité

The bottom of the transmitter features several ports:

Connectivity ports on the FrSky Tandem X18R

Figure 9: Illustration of the various connectivity ports.

Entretien

1. Nettoyage

Wipe the transmitter with a soft, dry cloth. Do not use solvents or abrasive cleaners. For the touchscreen, use a screen-specific cleaning solution and a microfiber cloth.

2. Mises à jour du micrologiciel

Regularly check the official FrSky website for the latest firmware updates. Firmware updates can be performed via the USB Type-C port or by loading files onto a Micro SD card and updating through the system menu.

3. Entretien de la batterie

To prolong battery life, avoid fully discharging the battery. Store the transmitter in a cool, dry place when not in use for extended periods. Do not expose the battery to extreme temperatures.

Dépannage

Problème Cause possible Solution
L'émetteur ne s'allume pas. Low or discharged battery; incorrect battery installation. Charge the battery using the USB-C cable. Verify battery is correctly connected.
Aucune réponse de contrôle du modèle. Receiver not bound; incorrect RF mode; out of range. Ensure receiver is properly bound to the transmitter. Check RF mode settings. Perform a range check.
L'écran tactile ne répond plus. Problème logiciel temporaire ; interférence avec le protecteur d’écran. Restart the transmitter. Ensure screen is clean and free of debris. If a screen protector is used, ensure it is properly applied.
Voice alerts or haptic feedback not working. Settings disabled; volume too low. Check system settings for voice and haptic feedback options. Adjust volume levels.

For further assistance, please visit the official FrSky support website ou contactez leur service client.

Caractéristiques

Garantie et assistance

FrSky products are typically covered by a limited warranty against manufacturing defects. Please refer to the warranty card included with your product or visit the official FrSky website for detailed warranty terms and conditions. For technical support, firmware downloads, and FAQs, please visit the FrSky support page:

Official FrSky Website: www.frsky-rc.com