1. Consignes de sécurité importantes
Lisez attentivement toutes les instructions avant d'utiliser l'appareil. Conservez ce manuel pour toute consultation ultérieure. Respectez toujours les consignes de sécurité de base afin de réduire les risques d'incendie, d'électrocution ou de blessure.
- Assurez-vous que la machine à laver est correctement mise à la terre.
- N’utilisez pas la machine si elle est endommagée ou si elle présente un dysfonctionnement. Contactez le service client.
- Tenez les enfants éloignés de l'appareil pendant son fonctionnement.
- Ne lavez pas les articles souillés par des substances inflammables.
- Débranchez l'appareil avant de le nettoyer ou d'effectuer toute opération d'entretien.
2. Installation et configuration
2.1 Déballage
Retirez soigneusement tous les matériaux d'emballage. Inspectez la machine afin de vérifier qu'elle n'a subi aucun dommage pendant le transport. Conservez l'emballage pour un éventuel transport ultérieur.
2.2 Exigences relatives à l'emplacement
Place the washing machine on a firm, level surface. Ensure there is adequate space around the machine for ventilation and maintenance. Avoid direct sunlight or excessively humid environments.
Description de l'image : This diagram illustrates the necessary clearance for installation. It shows the product dimensions (57cm depth x 59cm width x 97cm height) and recommends additional space for door frames, entrances, and stairs. For example, an additional 10cm width is required for product dimensions when passing through narrow spaces. For installation, ensure at least 1cm clearance from the left/right wall and 1cm from the rear wall. When opening the top lid, allow 10-15cm clearance above the machine.
2.3 Raccordements d'eau et d'évacuation
- Connect the water supply hose to the water inlet valve on the back of the machine and to a cold water tap. Ensure connections are tight to prevent leaks.
- Position the drain hose into a standpipe or laundry tub, ensuring it is securely fastened to prevent dislodging during the drain cycle. The drain hose connection should be at least 9cm above the floor.
2.4 Mise à niveau de la machine
Utilisez un niveau à bulle pour vous assurer que la machine est parfaitement de niveau. Ajustez les pieds de nivellement situés sous la machine si nécessaire. Une machine de niveau réduit les vibrations et le bruit pendant son fonctionnement.
3. Mode d'emploi
3.1 Panneau de configuration terminéview
Description de l'image : This image shows a close-up of the washing machine's touch control panel. It features an LED display in the center showing remaining time and settings. Buttons for water level, wash, rinse, spin, course selection, power, and start/pause are visible. The panel also indicates the 8.5kg capacity.
3.2 Chargement du linge
Open the top lid and load clothes loosely into the tub. Do not overload the machine. For optimal washing performance, ensure clothes can move freely.
Description de l'image : Cette image offre une vue de dessus. view of the Haier washing machine with its glass lid open, revealing the stainless steel wash tub and the pulsator at the bottom. The control panel is visible at the front.
3.3 Automatic Detergent Dispenser
The machine features an automatic liquid detergent dispenser. Pour liquid detergent into the designated compartment. The machine will automatically dispense the appropriate amount based on the laundry load, eliminating the need for manual measurement each time.
Description de l'image : This image shows a hand refilling the automatic liquid detergent dispenser located on the top edge of the washing machine. The dispenser is a clear, elongated container designed for easy pouring and monitoring of detergent levels.
3.4 Sélection d'un cours de lavage
Turn on the power and select your desired wash course using the control panel. The machine offers various programs tailored for different fabric types and washing needs.
Description de l'image : This image displays a list of available wash courses for the Haier washing machine, including Standard A (daily wash), Standard B (single rinse), My Flow (custom settings), Careful (for jeans and thick items), Quick (for lightly soiled items), Blanket, Tub Air Dry, Fragrance Up (to enhance fabric softener scent), Dry (for delicate items), and Tub Cleaning.
Cours disponibles:
- Norme A : Pour le linge de tous les jours.
- Norme B : For everyday laundry with a single rinse.
- My Flow: Allows you to save and use your preferred custom settings.
- Prudent: Suitable for washing items like jeans and thick fabrics.
- Rapide: A 10-minute cycle for lightly soiled items, reducing household chores. (Max 2.0kg load)
- Couverture: For washing blankets and large items.
- Séchage à l'air libre dans la baignoire : Reduces drying time and is ideal for indoor drying.
- Fragrance Up: Ensures fabric softener scent adheres evenly to clothes, enhancing the fragrance effect.
- Sec: Pour les articles délicats.
- Nettoyage de la baignoire : For regular cleaning of the wash tub.
3.5 Démarrage du cycle de lavage
Press the Start/Pause button to begin the selected wash cycle. The machine will automatically fill with water, dispense detergent, wash, rinse, and spin.
3.6 Caractéristiques spéciales
- High Concentration Spiral Wash: Creates a high-concentration detergent solution and powerful spiral water flow to effectively remove dirt.
- Wrinkle-Reducing Spin: Adjusts spin time and rotation speed to minimize wrinkles, reducing ironing time. (Max 1.0kg load)
- Moteur à variateur de fréquence : Direct drive inverter motor ensures low noise and low vibration operation, allowing for quiet washing even at night.
Description de l'image : This image highlights the washing machine's high cleaning power. It shows a shirt being washed in a powerful spiral water flow, alongside diagrams of the high-concentration spiral wash, 3D wing pulsator, and checkered tank design, all contributing to effective dirt removal.
Description de l'image : This diagram illustrates the internal structure of the DD Inverter motor, emphasizing its benefits: low noise, low vibration, and energy saving. It explains that the direct connection to the wash tub and precise control of rotation speed and friction contribute to reduced energy consumption.
4. Entretien et nettoyage
Un entretien régulier assure des performances optimales et prolonge la durée de vie de votre machine à laver.
4.1 Nettoyage de la baignoire
Use the 'Tub Cleaning' course regularly to prevent mold and mildew buildup in the wash tub. The 'Quick Tub Cleaning' function takes approximately 2 minutes and is recommended after each wash cycle to suppress mold growth.
Description de l'image : This image shows the interior of the washing machine tub during a 'Quick Tub Cleaning' cycle, with water swirling inside. A timer indicating '2 minutes' is overlaid, highlighting the short duration of this maintenance function.
4.2 Nettoyage du distributeur de détergent
The automatic liquid detergent dispenser tank (approx. 540ml capacity) is removable for easy cleaning. Periodically remove and rinse it thoroughly to prevent residue buildup.
4.3 Nettoyage du filtre à peluches
Regularly clean the lint filter to ensure efficient lint removal and prevent drainage issues. Refer to the diagram in the full manual for filter location and removal instructions.
4.4 Nettoyage extérieur
Wipe the exterior of the machine, including the glass top, with a soft, damp cloth. The flat glass top design makes cleaning easy.
5. Dépannage
Avant de contacter le service client, veuillez consulter les problèmes courants et leurs solutions ci-dessous :
| Problème | Cause possible | Solution |
|---|---|---|
| La machine ne démarre pas | Power cord unplugged, lid not closed, water supply off. | Check power connection, ensure lid is fully closed, open water tap. |
| Vibrations/bruit excessifs | Machine not level, overloaded, foreign objects in tub. | Level the machine, reduce load, check for and remove foreign objects. |
| Fuite d'eau | Loose hose connections, clogged drain hose. | Tighten hose connections, clear drain hose. |
| Le détergent ne s'distribue pas | Dispenser tank empty, clogged dispenser. | Refill dispenser, clean dispenser tank. |
6. Spécifications du produit
- Marque: Haier
- Numéro de modèle : JW-KD85B
- Dimensions du produit (P x L x H) : 57 cm x 59 cm x 97 cm
- Capacité: 8.5 kg
- Poids de l'article : 40 kg
- Couleur: Blanc
- Voltage: 100 V (CA)
- Niveau de bruit : 38 dB
- Type de contrôle : Touch Screen (LED Display)
- Mode de fonctionnement : Entièrement automatique
- Nombre de programmes : 13
- Caractéristiques spéciales : Inverter, Start Reservation Timer, Child Lock, Drum Clean, Automatic Detergent Dispenser
- Matériau de la baignoire : Acier inoxydable
- Composants inclus : Magic hose connection (1), Bottom cover (with 1 screw), Liquid detergent auto dispenser tank (1), Water supply hose (1)
7. Informations sur la garantie
This Haier washing machine (Model JW-KD85B) comes with a Garantie constructeur d'un an from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included with your product or contact Haier customer support.
8. Assistance clientèle
For any inquiries, technical assistance, or service requests, please contact Haier customer support. Haier offers comprehensive after-sales service across Japan.
Description de l'image : This image highlights Haier's nationwide after-sales service in Japan, available 365 days a year. It shows icons representing nationwide coverage across 47 prefectures and a 365-day reception service, indicating support from Haier Aqua Service and Haier Customer Center for repairs and consultations.
Haier Customer Center: Available 365 days a year for consultations and repairs.
Please visit the official Haier website or refer to the contact information provided in your product documentation for the most up-to-date support details.
