1. Introduction
This manual provides essential information for the setup, operation, and maintenance of the Waveshare ESP32-P4 High-Performance Development Board. The ESP32-P4-Module-DEV-KIT-C is designed for multimedia and edge computing applications, featuring a 400MHz RISC-V dual-core processor, Wi-Fi 6, Bluetooth 5/BLE, and extensive peripheral support. This specific kit includes a 10-inch DSI Capacitive Touch Display and an RPi Camera (B).
The board offers comprehensive connectivity and rich human-machine interfaces, making it suitable for complex multimedia projects. It also incorporates advanced security features to ensure robust data protection.
2. Contenu du colis
Verify that all items listed below are present in your package. Refer to the image for visual confirmation of the components included in the ESP32-P4-Module-DEV-KIT-C.
- ESP32-P4-Module-DEV-KIT-C Development Board x1
- 10.1-DSI-TOUCH-A 10-inch DSI Capacitive Touch Display x1
- Caméra RPi (B) x1
- Speaker (8Ω 2W) x1
- paquet de vis x1
- Câble USB Type-A à double prise x1
- USB Type-A to Type-C cable x1
- DSI cable x1
- Câble FFC 15 broches x1
- FFC 22PIN cable (2PCS) x1
- 2PIN cable x1
Figure 2.1: Contents of the ESP32-P4-Module-DEV-KIT-C package.
3. Produit terminéview
The Waveshare ESP32-P4 Development Board is a high-performance platform built around the ESP32-P4 and ESP32-C6 modules, offering robust capabilities for various embedded projects.
3.1 Principales caractéristiques
- Processeur haute performance : Features a 400MHz RISC-V dual-core processor for enhanced performance.
- Mémoire: Up to 32MB PSRAM and 16MB Nor Flash for ample storage and processing.
- Connectivité sans fil: Supports Wi-Fi 6 and Bluetooth 5/BLE for versatile communication.
- Interfaces riches : Includes MIPI-CSI (Camera), MIPI-DSI (Display), I2S, SPI, I2C, UART, USB 2.0 OTG, and more.
- Ethernet with PoE: Onboard RJ45 Ethernet with Power over Ethernet (PoE) functionality.
- En-tête GPIO : 40-pin GPIO header compatible with Raspberry Pi HATs.
- Sécurité: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG for data security.
- Support multimédia : Designed for multimedia applications with integrated image signal processor and H.264 encoder.
Figure 3.1: ESP32-P4-Module Development Board overview.
3.2 Integrated Modules
The board integrates the ESP32-P4-Module, which includes the ESP32-C6 for Wi-Fi 6 and Bluetooth 5/BLE connectivity, and 16MB Nor Flash.
Figure 3.2: ESP32-P4-Module for high performance.
Figure 3.3: Wi-Fi 6 and Bluetooth 5/BLE support.
3.3 Alimentation PoE
The board includes a reserved PoE module header, allowing for power supply and network connection through a single Ethernet cable when connected to a compatible PoE module (not included).
Figure 3.4: Reserved PoE module header.
4. Board Layout and Pinout
Understanding the board's layout and pin definitions is crucial for proper connection and development.
4.1 What's On Board
The following diagram identifies key components and interfaces on the ESP32-P4-Module-DEV-KIT-C.
Figure 4.1: Labeled components of the ESP32-P4-Module-DEV-KIT-C.
4.2 Pin Definition and Outline Dimensions
The 40-pin GPIO header provides various power and data pins. Refer to the diagram for pin assignments and board dimensions.
Figure 4.2: Pin definitions and outline dimensions.
5. Configuration et connexion
This section guides you through connecting the various components of your ESP32-P4 development kit.
5.1 Kit Selection Overview
The ESP32-P4-Module-DEV-KIT is available in several configurations. This manual focuses on the 'C' kit, which includes the 10-inch DSI LCD and RPi Camera (B).
Figure 5.1 : Plusview of available kit configurations.
5.2 Connexion Examples
Follow these general steps for connecting the display and camera to the development board:
- Connect the DSI Display: Carefully connect the DSI cable from the 10.1-DSI-TOUCH-A display to the MIPI-DSI interface on the ESP32-P4 board. Ensure the cable is inserted correctly and secured.
- Connect the RPi Camera: Attach the RPi Camera (B) to the MIPI-CSI interface on the development board using the provided FFC cable.
- Connexion électrique : Connect the USB Type-A to Type-C cable to the Type-C UART connector on the board for power and programming.
- Connexion haut-parleur : Connect the 8Ω 2W speaker to the designated speaker header.
Figure 5.2 : Example connections for the development kit.
6. Mode d'emploi
After connecting all components, you can begin operating your ESP32-P4 Development Board. The board typically runs a Linux operating system and supports various development environments.
- Mise sous tension : Connect the Type-C USB cable to a power source. The power supply indicator LED should illuminate.
- Développement de logiciels : Pour des guides de programmation détaillés et des exemplesamples, refer to the official Waveshare Wiki resources. This includes information on using ESP-IDF and potentially Arduino IDE for development.
- Passage en mode téléchargement : Press and hold the BOOT button, then press the RST Reset button to enter download mode for flashing firmware.
- USB OTG : The USB OTG 2.0 high-speed ports can be switched between host and device via a jumper for expanded USB functionalities.
It is recommended to consult the Waveshare Wiki for the latest software, drivers, and specific programming instructions relevant to the ESP32-P4 and ESP32-C6 modules.
7. Entretien
Proper maintenance ensures the longevity and reliable operation of your ESP32-P4 Development Board.
- Manutention: Always handle the board by its edges to avoid touching sensitive components. Use anti-static precautions when possible.
- Nettoyage: Veillez à ce que le tableau reste propre et exempt de poussière et de débris. Utilisez une brosse douce et sèche ou de l'air comprimé pour le nettoyer. Évitez les nettoyants liquides.
- Stockage: Conservez la planche dans un endroit sec et frais, à l'abri de la lumière directe du soleil et des températures extrêmes.
- Alimentation: Use a stable and appropriate power supply (5V via Type-C or 5V header) to prevent damage.
- Batterie RTC : If using a rechargeable RTC battery, ensure it is compatible and correctly installed.
8. Dépannage
This section addresses common issues you might encounter with the ESP32-P4 Development Board.
- La carte ne s'allume pas :
- Ensure the USB Type-C cable is securely connected to both the board and a functional power source.
- Vérifiez que la source d'alimentation fournit un volume adéquattage (5 V).
- L'écran n'affiche pas l'image :
- Check the DSI cable connection between the board and the display. Ensure it is fully seated and oriented correctly.
- Confirm that the software or firmware running on the ESP32-P4 is configured to output to the DSI display.
- Caméra ne fonctionne pas :
- Inspect the FFC cable connection for the RPi Camera (B) to the MIPI-CSI interface.
- Ensure the camera module is properly seated.
- Verify that the software includes the necessary drivers and configurations for the camera.
- Problèmes de connectivité Wi-Fi/Bluetooth :
- Check that the ESP32-C6 SMD Antenna is not obstructed.
- Ensure your software has correctly initialized the Wi-Fi or Bluetooth modules and is attempting to connect to valid networks/devices.
- Software/Firmware Upload Failure:
- Ensure the board is in download mode (press and hold BOOT, then press RST).
- Verify that the correct drivers for the USB-UART bridge are installed on your computer.
- Check your development environment settings for correct port selection and baud rate.
For more specific troubleshooting or advanced issues, refer to the Waveshare Wiki or community forums.
9. Spécifications
Detailed technical specifications for the Waveshare ESP32-P4 Development Board and included components.
| Fonctionnalité | Spécification |
|---|---|
| Marque | Waveshare |
| Nom du modèle | ESP32-P4-Module-DEV-KIT-C |
| Processeur | 400MHz RISC-V Dual-Core (Espressif) |
| BÉLIER | 32 Mo de mémoire PSRAM |
| Mémoire flash | 16 Mo ni Flash |
| Connectivité sans fil | Wi-Fi 6, Bluetooth 5/BLE (via ESP32-C6) |
| Système opérateur | Linux |
| Interfaces | MIPI-CSI, MIPI-DSI, I2S, SPI, I2C, UART, USB 2.0 OTG, RJ45 Ethernet (PoE) |
| GPIO | 40-pin header (Raspberry Pi HAT compatible) |
| Emplacement pour carte SD | SDIO 3.0 TF card slot |
| Poids de l'article | 1.69 livre (environ 0.77 kg) |
| Dimensions du colis | 11.89 x 8.5 x 2.05 pouces (environ 30.2 x 21.6 x 5.2 cm) |
9.1 DSI Capacitive Touch Display (10.1-DSI-TOUCH-A)
Figure 9.1: DSI Capacitive Touch Display specifications.
9.2 RPi Camera (B)
Figure 9.2: RPi Camera (B) specifications.
10. Assistance et ressources
For further technical documentation, software examples, and community support, please visit the official Waveshare Wiki. The Wiki provides comprehensive resources to assist with your development projects.
Waveshare Wiki: https://www.waveshare.com/wiki
