Manuel d'utilisation de l'alimentation de programmation de l'onduleur AUTOOL EM385

1. Introduction

The AUTOOL EM385 is a versatile inverter programming power supply designed for automotive applications. It provides stable voltage for ECU reprogramming and diagnostic work, functions as a multi-stage intelligent battery charger for both lead-acid and lithium batteries, offers battery restoration capabilities, and can act as a jump starter. Its intuitive touchscreen interface and robust design make it an essential tool for professional and enthusiast use.

2. Consignes de sécurité

Always read and understand this manual before operating the device. Failure to follow safety instructions may result in injury or damage to the device or vehicle.

• Assurer une ventilation adéquate pendant le fonctionnement.
• Connect cables correctly: red to positive (+), black to negative (-).
• Avoid short circuits between the output terminals.
• Keep the device dry and away from flammable materials.
• Ne pas démonter ni modifier l'appareil.
• The EM385 features 9 protection functions including emergency stop, short circuit protection, overheat protection, overvoltage protection, sous-voltage protection, reverse polarity protection, no-load protection, output overcurrent protection, and output overvoltage protection.

Figure 2.1: Nine Safety Protections

The AUTOOL EM385 is equipped with a comprehensive smart alarm system to ensure safety for both the equipment and the vehicle during the charging and programming processes.

3. Produit terminéview

Figure 3.1: AUTOOL EM385 Unit and Accessories

The AUTOOL EM385 unit comes with the main power supply, heavy-duty output cables with clamps, and a power input cable. It features a robust design with a convenient carry handle.

3.1. Composants et commandes

• HD Touch Color Screen: 3.4-inch high-definition color touchscreen for easy operation and faster response.
• Bouton d'arrêt d'urgence : Pour une coupure de courant immédiate en cas d'urgence.
• Power Output Interface: Connection point for the output cables to the vehicle or battery.
• Interface d'entrée d'alimentation : For connecting the AC power cord (110V).
• Ventilateurs de refroidissement: High-speed cooling fans ensure stable operation during extended use.
• Boutons de contrôle : Intuitive buttons for navigation and selection.

Figure 3.2: 4.3-inch Touch Screen and Emergency Stop Button

The device features a responsive touchscreen for selecting various modes and settings, along with a prominent emergency stop button for safety.

4. Installation

1. Déballer: Carefully remove the EM385 unit and all accessories from the packaging.
2. Inspecter: Check the device and cables for any signs of damage. Do not use if damaged.
3. Placement: Place the unit on a stable, flat, and dry surface, ensuring adequate ventilation around the cooling fans.
4. Connexion électrique : Connect the AC power cord to the device's power input interface and then to a suitable 110V power outlet.
5. Connexion du câble de sortie : Connect the red and black output cables to the corresponding power output interfaces on the front of the unit.
6. Mise sous tension : Flip the power switch to the 'ON' position. The touchscreen will illuminate, and the device will boot up.

5. Modes de fonctionnement

The AUTOOL EM385 offers several operating modes to cater to various automotive power and charging needs. Navigate through the modes using the touchscreen display.

5.1. Programming Power Mode

This mode is specifically designed to provide a stable voltage under varying loads during major vehicle ECU reprogramming and diagnostic work. It supplies current up to 150A with a voltage range of 9-16V, ensuring stable data transmission.

Figure 5.1.1: Programming Power Mode Interface

In Programming Power Mode, you can precisely set the output voltage within the 9-16V range to meet the specific requirements of vehicle ECU programming, ensuring a consistent power supply.

5.2. Fast Charging Mode

The Fast Charging mode supports both lead-acid and lithium batteries with a multi-stage intelligent charging process. It uses pulse charging initially, switches to high-power charging, and then to trickle charging to prevent overcharging.

• Lead-acid battery charging: 40A/12V
• Lithium battery charging: 20A/12V

Figure 5.2.1: Fast Charging Mode Interface

The device automatically adjusts charging power for optimal efficiency, stopping when the battery is full to prevent overcharging.

Figure 5.2.2 : Types de batteries compatibles

The EM385 supports a wide range of rechargeable batteries, including standard lead-acid, AGM flat, AGM spiral, EFB, GEL, LFP, and NCM lithium batteries.

5.3. Adjustable Power Mode

This mode allows for adjustable voltage and current output, making the EM385 suitable for powering various external devices or for specific testing scenarios.

• Voltage 3-8.9V, current adjustable 1-20A.
• Voltage 9-16V, current adjustable 1-100A.

Figure 5.3.1: Adjustable Power Output Settings

The flexible output settings allow the EM385 to power a variety of automotive components or test equipment.

5.4. Battery Restoration Mode

This battery maintainer mode can repair batteries that have been discharged for a long time or have suffered severe power loss, aiming to restore them to a usable condition.

Figure 5.4.1: Battery Restoration Process

The battery restoration function helps to recover batteries that are in an insufficient voltage state, extending their lifespan.

5.5. Vehicle Display Mode

The display mode outputs an uninterruptible power supply and restarts automatically in case of power failure. This provides stable power support during vehicle display in showrooms and during battery replacement procedures.

Figure 5.5.1: Vehicle Display Mode in Use

This mode ensures continuous power to the vehicle's electrical systems, ideal for maintaining vehicle functions during demonstrations or when the main battery is disconnected.

5.6. Forced Start Mode (Jump Starter)

The EM385 can provide a 400A starting current to easily jump-start car engines that are under 3.0T displacement. When the current exceeds 400A, the protection is triggered for 500 milliseconds, interrupting the output during the protection period.

Figure 5.6.1: Emergency Start Connection

Connect the power supply to the vehicle's battery terminals and then start the engine. The device provides the necessary cranking current.

6. Entretien

• Nettoyage: Essuyez l'appareil avec un chiffon doux et sec. N'utilisez pas de nettoyants abrasifs ni de solvants.
• Stockage: Rangez l'appareil dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes lorsqu'il n'est pas utilisé.
• Inspection des câbles : Regularly inspect the power cables and clampVérifiez l'état de la pièce et signalez tout signe d'usure, coupure ou dommage. Remplacez-la si nécessaire.
• Ventilation: Veillez à ce que les grilles d'aération soient dégagées de poussière et de débris afin de maintenir une bonne circulation de l'air.

7. Dépannage

For issues not listed above, or if solutions do not resolve the problem, please contact AUTOOL customer support.

8. Spécifications

Figure 8.1 : Spécifications du produitview

A visual summary of the key technical specifications and physical dimensions of the EM385.

9. Garantie et assistance

The AUTOOL EM385 comes with a Garantie de trois ans for any quality problems. AUTOOL is committed to providing new replacements or solutions until customer satisfaction is achieved without delay. The product also includes support technique à vie.

For any needs or technical assistance, you are warmly welcomed to contact AUTOOL customer service. They aim to respond within 24 hours.

Please refer to your purchase documentation or the official AUTOOL website for specific contact details and the most up-to-date warranty information.