1. Produit terminéview
The JONSBO N10 is a compact Mini ITX PC case designed for small form factor (SFF) builds. It features an aluminum alloy shell with a sandblasted finish and North American walnut trim, offering both durability and aesthetic appeal. The case supports Mini ITX motherboards and 1U FLEX power supplies up to 150mm in length. Its design allows for flexible placement in both standing and lying positions.
Image 1.1: The JONSBO N10 Mini ITX PC Case in a typical desktop setup, showcasing sa taille compacte et son design.
Image 1.2: The JONSBO N10 case positioned on a desk, highlighting its small footprint and integration into a workspace.
Vidéo 1.1 : Présentation officielle du produitview of the JONSBO N10/NV10 Mini ITX PC Case, demonstrating its features and design.
Caractéristiques principales :
- Conception compacte : Portable capacity of approximately 4.5L, suitable for small spaces.
- Matériaux de qualité supérieure : Constructed from aluminum alloy with a sandblasted finish and North American walnut trim.
- Placement flexible : Can be used in both standing and lying orientations.
- Refroidissement efficace : Features a multi-component perforated design for enhanced heat dissipation and improved airflow. Includes two 5000 RPM 40mm high-speed fans for auxiliary hard drive cooling.
- Support de stockage: Accommodates up to four 2.5-inch SSDs.
- Compatibilité de l'alimentation : Supports 1U FLEX power supplies with a maximum length of 150mm.
- Entretien facile : The upper cover is equipped with an easy-to-pull handle for convenient disassembly and maintenance.
- E / S avant: Includes a USB 3.2 Gen 2 Type-C port.
- Support de radiateur: Compatible with air coolers up to 38mm in height.
2. Configuration et installation
This section provides general guidelines for installing components into your JONSBO N10 PC case. Always refer to the specific manuals for your motherboard, power supply, and other components for detailed instructions.
2.1 Démontage du boîtier
To begin installation, the case needs to be opened. The JONSBO N10 features a quick-release design for the top plate, allowing for easy access to the internal components.
- Locate the easy-to-pull handle on the upper cover.
- Gently pull the handle to release the top cover.
- Remove the top cover to access the interior of the chassis.
Image 2.1: The JONSBO N10 case with its top panel lifted, demonstrating the tool-free access for installation and maintenance.
2.2 Installation de la carte mère
The JONSBO N10 is compatible with Mini ITX motherboards. Install your motherboard into the designated area within the chassis, securing it with the appropriate screws.
Image 2.2 : Interne view of the JONSBO N10 case showing a Mini ITX motherboard and CPU cooler installed.
2.3 Installation de l'alimentation électrique
The case supports 1U FLEX power supplies with a maximum length of 150mm. The power supply is typically installed from the bottom of the chassis.
- Orient the 1U FLEX power supply correctly.
- Slide the power supply into its designated slot from the bottom of the case.
- Secure the power supply using the provided screws.
Image 2.3: Diagram illustrating the installation process of a 1U FLEX power supply into the JONSBO N10 case from the bottom.
2.4 Installation du périphérique de stockage
The JONSBO N10 provides support for up to four 2.5-inch SSDs. A dedicated bracket is used for mounting these drives.
- Attach the 2.5-inch SSDs to the provided storage bracket.
- Slide the filled bracket into its designated position within the chassis.
- Assurez-vous que le support est solidement fixé.
Image 2.4: Diagram demonstrating the installation of 2.5-inch SSDs into the JONSBO N10 case using a dedicated bracket.
2.5 Installation du ventilateur
The N10 case includes two 40mm high-speed fans for auxiliary hard drive cooling, located at the rear window. Ensure these fans are properly connected to your motherboard's fan headers.
Image 2.5 : Arrière view of the JONSBO N10 case, highlighting the placement of the two 40mm fans for hard drive cooling.
3. Mode d'emploi
Once all components are installed and the case is reassembled, you can begin operating your PC.
- Connect all necessary external peripherals (monitor, keyboard, mouse, etc.) to the motherboard's I/O ports.
- Connect the power cable to the power supply unit and then to a wall outlet.
- Press the power button located on the front panel of the case to turn on your PC.
- Utilize the front USB 3.2 Gen 2 Type-C port for connecting compatible devices.
Illustration 3.1 : Avant view of the JONSBO N10 case, showing the walnut trim and the front I/O port.
4. Entretien
Un entretien régulier contribue à garantir des performances optimales et une longue durée de vie aux composants de votre PC.
4.1 Nettoyage
- Extérieur: Wipe the aluminum alloy and walnut surfaces with a soft, dry cloth. Avoid abrasive cleaners.
- Intérieur: Periodically open the case (refer to Section 2.1) and use compressed air to remove dust buildup from fans, heatsinks, and other components. Ensure the PC is powered off and unplugged before cleaning the interior.
- Trous d'aération : The perforated design allows for good airflow. Keep these holes clear of obstructions and dust.
Image 4.1 : Divers views of the JONSBO N10 case highlighting the perforated panels designed for optimal heat dissipation and airflow.
4.2 Fan Check
Ensure the two 40mm fans are free from dust and spinning correctly to maintain adequate cooling for your hard drives.
5. Dépannage
Cette section aborde les problèmes courants que vous pourriez rencontrer avec votre boîtier PC.
5.1 PC Does Not Power On
- Câble d'alimentation: Assurez-vous que le câble d’alimentation est correctement connecté à l’alimentation et à la prise murale.
- Commutateur d'alimentation : Verify that the power switch on the power supply unit is in the "ON" position.
- Connecteurs du panneau avant : Check that the power button and other front panel connectors are correctly attached to the motherboard.
- Connexions internes : Confirm all internal power cables (24-pin ATX, CPU power, etc.) are firmly seated.
5.2 Problèmes de surchauffe
- Débit d'air : Ensure the case's ventilation holes are not obstructed.
- Ventilateurs: Verify that all case fans and CPU cooler fans are spinning correctly. Clean any dust buildup.
- Compatibilité des composants : Ensure your CPU cooler height is within the 38mm limit to allow for proper airflow.
6. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Taille du produit | 205mm (W) x 205mm (D) x 108mm (H) |
| Matériel | 3.3mm Aluminum Alloy + 1.0mm Steel Plate |
| Hard Drive Bay | 4 SSD de 2.5 pouces |
| Compatibilité de la carte mère | Mini ITX |
| Port E/S avant | USB 3.2 Gen 2 Type-C x 1 |
| Prise en charge du bloc d'alimentation | 1U FLEX power supply (max length 150mm) |
| Radiator Support (Air Cooler) | ≤ 38mm height |
| Ventilateurs | 2 x 40mm (5000 rpm ± 10%) (standard) |
| Chassis Weight (N.W.) | 1.6 kg |
Image 6.1: Diagram illustrating the dimensions of the JONSBO N10 Mini ITX PC Case.
Image 6.2: Detailed product information table for the JONSBO N10 case, including dimensions, materials, and component support.
7. Garantie et assistance
For warranty information, technical support, or service inquiries, please contact JONSBO customer service or visit the official JONSBO webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.
JONSBO Official Website: www.jonsbo.com
