Introduction
Thank you for choosing a Timex watch. This manual provides essential information for the proper use and care of your Timex Men's Dress Chronograph 43mm Watch, model TW2Y01600JI. This watch features a quartz chronograph movement, a date display, and is designed for everyday wear with its water-resistant construction.
Installation
1. Réglage de l'heure
- Pull the crown (B) out to the furthest position.
- Turn the crown (B) in either direction to set the hour and minute hands. Ensure the AM/PM is correctly set if your watch has a 24-hour indicator or if the date changes at midnight.
- Push the crown (B) back into its normal position to start the watch.
2. Fixer la date
- Pull the crown (B) out to the middle position.
- Turn the crown (B) to set the date.
- Once the correct date is displayed, push the crown (B) back into its normal position.
3. Ajustement du bracelet
The stainless steel bracelet is designed for a secure fit. For optimal comfort, it may require adjustment to fit your wrist size. It is recommended to have a professional jeweler adjust the bracelet by adding or removing links. Refer to the sizing chart video for guidance on how different case sizes appear on various wrist sizes.

Utilisation du chronographe
Your watch is equipped with a chronograph function to measure elapsed time.
- Commencer: Press pusher (A) to start the chronograph. The chronograph second hand will begin to move.
- Stop: Press pusher (A) again to stop the chronograph. The elapsed time will be displayed.
- Remise à zéro: Après avoir arrêté le chronographe, appuyez sur le poussoir (C) pour remettre toutes les aiguilles du chronographe à leur position zéro.
Entretien
Nettoyage
To maintain the appearance of your watch, wipe the case and bracelet with a soft, damp Chiffon. Évitez d'utiliser des produits chimiques agressifs ou des matériaux abrasifs, car ils peuvent endommager la finition.
Résistance à l'eau
This watch is water resistant to 50 meters (WR50M). This means it is suitable for short periods of recreational swimming, but not for diving or snorkeling. Do not operate the crown or pushers while the watch is wet or submerged, as this can compromise the water resistance. Exposure to hot water (e.g., in showers or saunas) should be avoided as it can damage seals.

Dépannage
- Montre non fonctionnelle : Check if the crown is fully pushed in. If the watch still does not run, the battery may need replacement. The watch uses a SR920SW CELL battery.
- Date/heure incorrecte : Reportez-vous aux sections « Réglage de l’heure » et « Réglage de la date » pour effectuer les nouveaux réglages.
- Aiguilles du chronographe ne se remettant pas à zéro : This may indicate a need for chronograph hand calibration. Consult a professional watch repair service or the Timex support website for instructions specific to your movement.
Caractéristiques
| Numéro de modèle | TW2Y01600JI |
| Diamètre du boîtier | 43 mm |
| Épaisseur du boîtier | 11.5 mm |
| Largeur de bande | 20 mm |
| Longueur de la bande | 8 pouces |
| Type de mouvement | Quartz |
| Type d'affichage | Analogique |
| Résistance à l'eau | 50 mètres (WR50M) |
| Matériau du boîtier | Acier inoxydable |
| Matériau de la bande | Acier inoxydable |
| Matériau en cristal | Verre minéral |
| Type de batterie | SR920SW CELL |
Garantie et assistance
Your Timex watch is covered by a limited warranty. For detailed warranty information, service, or support, please visit the official Timex webConsultez le site ou contactez leur service client. Conservez votre reçu d'achat comme preuve d'achat.





