Manuel d'utilisation du vélo électrique pliant VICTRIP

1. Introduction

This manual provides comprehensive instructions for the safe operation, assembly, maintenance, and troubleshooting of your VICTRIP Folding Electric Bike. Please read this manual thoroughly before your first ride to ensure proper usage and to maximize the lifespan of your e-bike. Keep this manual for future reference.

2. Consignes de sécurité

Your safety is paramount. Always wear a helmet and appropriate safety gear when riding. Adhere to all local traffic laws and regulations. Perform a pre-ride inspection before each use, checking brakes, tires, lights, and battery level. Avoid riding in adverse weather conditions or on unsafe terrain. Do not exceed the maximum weight recommendation of 330 pounds.

• Portez toujours un casque homologué.
• Vérifiez la pression des pneus avant chaque sortie.
• Vérifiez que les freins fonctionnent correctement.
• Ne roulez pas sous l’influence de l’alcool ou de drogues.
• Soyez attentif à votre environnement et aux autres usagers de la route.

3. Contenu du colis

Lors du déballage, veuillez vérifier que tous les composants énumérés ci-dessous sont présents et non endommagés :

• VICTRIP Folding Electric Bike (main frame with rear wheel)
• Roue avant
• Garde-boue avant
• Phare
• Pédales (gauche et droite)
• Coussin de siège
• Dossier
• Foot Pedals (for passenger seat)
• Chargeur
• Trousse à outils
• Manuel d'instructions
• Vêtements réfléchissants

If any items are missing or damaged, please contact VICTRIP customer support immediately.

4. Instructions de montage

The VICTRIP Folding Electric Bike comes 95% pre-assembled. Follow these steps to complete the assembly:

1. Déballage et déballage : Carefully remove the bike and all components from the packaging. Cut the yellow straps and open the box. Remove all protective foam and zip ties.
2. Install Front Fender and Headlight: Attach the front fender to the front fork using the provided screws and tools. Secure the headlight to the front fork, ensuring it is properly aligned and tightened.
3. Installer la roue avant : Carefully lift the front of the bike. Align the front wheel with the front fork, ensuring the brake disc slides correctly into the caliper. Secure the wheel using the quick-release skewer or axle nuts, ensuring it is tightly fastened.
4. Adjust Handlebar and Seat Post: Unfold the handlebar stem and lock it into place. Adjust the handlebar height to a comfortable riding position and secure the quick-release lever. Insert the seat post into the frame, adjust the height, and secure it with the quick-release clamp.
5. Installez les pédales : Identify the left (L) and right (R) pedals. The left pedal screws counter-clockwise, and the right pedal screws clockwise. Apply a small amount of grease to the pedal threads before installation. Tighten securely with a wrench.
6. Install Rear Foot Pedals: Attach the rear foot pedals to the designated mounting points on the rear frame using the provided tools. Ensure they are firmly secured.
7. Installer le dossier : Mount the backrest onto the rear rack using the provided screws and tools. Ensure it is stable and securely fastened.

Pour un guide visuel, veuillez vous référer à la vidéo d'assemblage officielle :

Image: The VICTRIP Folding Electric Bike in its full form, with an inset showing its compact folded state. This highlights the bike's design and portability.

Image: A detailed diagram illustrating the dimensions of the VICTRIP Folding Electric Bike in both its unfolded and folded configurations. It also provides information on recommended rider height and the maximum weight capacity of 330 pounds.

5. Mode d'emploi

Your VICTRIP Electric Bike offers multiple modes of operation and advanced features for an optimal riding experience.

5.1. Mise sous/hors tension

To power on the bike, press and hold the power button on the IP65 Color Display. To power off, press and hold the same button until the display turns off.

5.2. Modes de conduite

The bike features several riding modes:

• Mode d'assistance à la pédale : Provides electric assistance as you pedal. The level of assistance can be adjusted via the display. This mode offers up to 80 miles of range.
• Mode électrique : Fully electric operation using the throttle, without pedaling. This mode offers up to 50 miles of range.
• Mode manuel : Conduisez le vélo comme un vélo traditionnel, sans aucune assistance électrique.
• Régulateur de vitesse : Maintain an even speed without using the throttle. Activate this feature via the display.

5.3. Fonctions d'affichage

The IP65 Color Display shows key parameters:

• Barres de batterie
• Vitesse actuelle
• Odomètre
• Distance de voyage
• Assistance level (PAS Level)

Maximum speed, starting speed, and number of assistance levels can be customized through the display settings.

Image : Un collage montrantasing various detailed features of the VICTRIP Electric Bike, including the intuitive color LCD display, Shimano 7-speed gear shifter, bright LED headlight, robust front suspension fork, comfortable saddle, comfortable rear seat, and the warning tail light.

5.4. Changement de vitesse

The 7-speed Shimano transmission system allows you to smoothly switch between gears to adapt to different terrains and riding conditions. Use the twist grip shifter on the handlebar to change gears.

5.5. Système de freinage

The front and rear 180mm hydraulic disc brakes provide strong and reliable stopping power, even in wet conditions. When braking, the drive power will be cut off to enhance safety.

Image : Un gros plan view of the front hydraulic disc brake system, emphasizing its superior safety and responsiveness compared to traditional mechanical disc brakes.

6. Entretien

Regular maintenance is essential for the longevity and safe operation of your VICTRIP Electric Bike.

• Pneus: Regularly check tire pressure (20"x4.0" fat tires) and inspect for wear or damage. Maintain recommended pressure for optimal performance and safety.
• Freins: Periodically check brake pads for wear and ensure the hydraulic system is free of leaks. Adjust or replace components as needed.
• Chaîne: Veillez à ce que la chaîne reste propre et lubrifiée pour assurer des changements de vitesse fluides et prévenir la rouille.
• Batterie: Charge the 48V 20Ah battery regularly, even when not in use, to maintain its health. Avoid fully discharging the battery. Charging time is typically 4-6 hours.
• Nettoyage: Nettoyez le vélo avec un damp Chiffon. Évitez d'utiliser des jets d'eau à haute pression directement sur les composants électriques.
• Fixations : Periodically check all bolts and nuts for tightness, especially after the first few rides.

7. Dépannage

Voici quelques problèmes courants et leurs solutions potentielles :

If you encounter issues not listed here or if solutions do not resolve the problem, please contact VICTRIP customer support.

8. Spécifications

Key technical specifications for your VICTRIP Folding Electric Bike:

9. Garantie et assistance

VICTRIP provides a one-year warranty for the electric motor, battery, and charger of your electric bike. This warranty covers manufacturing defects and ensures peace of mind during your ownership.

For any warranty claims, technical assistance, or general inquiries, please contact VICTRIP customer support through the platform where you purchased the product or visit the official VICTRIP webVeuillez vous munir de vos informations d'achat et du numéro de modèle lorsque vous contactez l'assistance.

We are committed to providing excellent service and support for your VICTRIP Electric Bike.