Eridanus ERI-WT425

Eridanus Wall Hung Toilet with Tank

Model: ERI-WT425

Manuel d'instructions

Informations importantes

Veuillez lire attentivement ce manuel avant l'installation et l'utilisation. Conservez ce manuel pour toute consultation ultérieure.

Note: The toilet and tank are shipped in two separate packages and may not arrive at the same time. Ensure all packages are received before beginning installation.

Qu'y a-t-il dans la boîte

Avant de procéder à l'installation, vérifiez que tous les composants énumérés ci-dessous sont présents et non endommagés.

Diagram showing all components included in the Eridanus Wall Hung Toilet package, separated into Box-1 (toilet bowl, seat, mounting hardware) and Box-2 (in-wall tank carrier system, flush plate, pipes).

Figure 1: Included Components. Box-1 contains the Wall Hung Toilet, Removable Cover & Seat, Cover & Seat Mounting Bolt Kit, Toilet Mounting Bolt Kit, and Installation Instruction. Box-2 contains the Carrier and Tank, Rough-in Box, Pipe Clamp, Toilet Bolt Kit, Silicone Grease, Flush & Drain Pipes, Discharge Elbow, Protection Plugs, Protection Foam, Mounting Stud, Carrier Fixings Kit, and Flush Plate Installation Kit.

Données techniques et dimensions

Review the technical specifications and dimensions to ensure compatibility with your bathroom space and plumbing.

Technical data diagram for Eridanus Wall Hung Toilet ERI-WT425 showing side and top view dimensions in inches.

Figure 2: Technical Data for ERI-WT425. Dimensions include 20 7/8" length, 14 1/2" height, and 10 3/4" width. Please check overall dimensions and rough-in for your location prior to purchase. All dimensions are nominal with a tolerance of up to 2%.

Dimension guide for Eridanus Wall Hung Toilet ERI-WT425 showing side, front, and top view with key measurements.

Figure 3: Dimension Guide for ERI-WT425. This diagram provides detailed measurements for the toilet bowl, including length, width, and height from various angles. It is crucial to verify these dimensions against your installation space.

Caractéristiques:

Numéro de modèleERI-WT425
CouleurBlanc
Matériau (Toilettes)Céramique
Matériau (siège)Polypropylène (PP)
Type d'installationFixation murale
Compatibilité des goujonsConvient aux montants 2x4
Système de chasse d'eauDouble chasse d'eau (0.8/1.6 GPF)
Capacité du réservoir2.2 Gallons (Concealed)
Maximum Weight Capacity (Frame)880 livres
Hauteur réglable0-8 3/4 inches

Configuration et installation

Professional installation is recommended. Follow these steps carefully for proper setup.

Guide vidéo d'installation

Video 1: Wall Hung Toilet Installation Guide. This video provides a visual step-by-step guide for installing the in-wall tank carrier system and the wall-hung toilet bowl.

Key Installation Steps (Refer to video for details)

  1. Préparez le mur : Mark the desired height and position for the in-wall tank carrier system. Ensure the wall structure (2x4 studs) can support the unit.
  2. Mount the Carrier Frame: Securely attach the carrier frame to the wall studs and floor using the provided mounting hardware. Adjust the height as needed.
    Diagram showing secure installation of the in-wall tank carrier system, bolted to wall studs and affixed to the floor.

    Figure 4: Secure Installation of the In-Wall Carrier. The frame is mounted to the wall using metal brackets and bolted to wall studs, then affixed to the floor.

  3. Connecter la plomberie : Install the water supply line and the discharge pipe to the in-wall tank. Ensure all connections are watertight.
  4. Install Rough-in Box and Flush Plate Mechanism: Place the rough-in box and connect the flush plate mechanism. Trim the box to match the wall finish.
    Diagram illustrating the In-Wall Toilet Tank Carrier System with dual flush, large capacity tank, stainless steel frame, and adjustable height, designed for 2x4 wall stud construction.

    Figure 5: In-Wall Toilet Tank Carrier System. This diagram highlights features like dual flush, 2.2 GAL tank, 880 lbs capacity stainless steel frame, and adjustable height for 2x4 wall studs.

  5. Mur fini : Cover the in-wall tank and carrier with drywall or tile, leaving access for the flush plate and toilet mounting points.
  6. Cuvette de toilette à monter : Attach the toilet bowl to the mounting studs protruding from the wall. Connect the flush and drain pipes to the bowl.
  7. Installer un siège de toilette : Secure the soft-close toilet seat and cover to the bowl.
  8. Installer la plaque affleurante : Attach the dual-flush plate to the rough-in box, connecting it to the flush mechanism.
  9. Test: Perform a flush test to check for leaks and proper operation.

Mode d'emploi

The Eridanus Wall Hung Toilet features a dual-flush system for water conservation and a soft-close seat for quiet operation.

Entretien

Regular cleaning and maintenance will ensure the longevity and optimal performance of your Eridanus Wall Hung Toilet.

Dépannage

Cette section aborde les problèmes courants que vous pourriez rencontrer. Pour tout autre problème, veuillez contacter le service client.

ProblèmeCause possibleSolution
La chasse d'eau ne fonctionne pas ou est faible.
  • Vanne d'alimentation en eau fermée
  • Flush mechanism obstruction
  • Faible pression d'eau
  • Open the water supply valve fully.
  • Inspect the flush mechanism inside the tank for any blockages.
  • Vérifiez la pression de l’eau domestique.
Continuous running water
  • Flapper or fill valve issue
  • Flush plate mechanism stuck
  • Access the in-wall tank (via flush plate opening) and inspect the flapper and fill valve for proper seating or damage. Adjust or replace as needed.
  • Ensure the flush plate buttons are not stuck.
Leaks around the toilet base or connections
  • Connexions desserrées
  • Joints endommagés
  • Carefully inspect all visible connections and tighten if loose.
  • If seals are damaged, professional assistance may be required to replace them.

Garantie et assistance

Eridanus s'engage à fournir des produits de qualité et à assurer la satisfaction de ses clients.

Image detailing Eridanus Premium Support, including 1 Year Part Replacement, 24 Hours Customer Assistance, 30 Days Easy Returns, and Lifetime Service.

Figure 10: Eridanus Premium Support. This image outlines the support services available, including part replacement, customer assistance, returns, and lifetime service.

Documents connexes - ERI-WT425

Préview Manuel d'utilisation des toilettes intelligentes Eridanus : caractéristiques, installation et dépannage
Manuel d'utilisation complet des toilettes intelligentes Eridanus. Découvrez l'installation, les fonctionnalités, le fonctionnement, l'entretien, le dépannage et la FAQ. Comprend les spécifications techniques.
Préview Toilettes intelligentes Eridanus Mason ERI-ST270-S : Caractéristiques, spécifications et guide d’installation
Découvrez les toilettes intelligentes Eridanus Mason (ERI-ST270-S). Ce document détaille leurs fonctionnalités avancées, leurs caractéristiques techniques, les exigences d'installation, les composants inclus et les finitions disponibles. Idéales pour les salles de bains modernes alliant confort et technologie intelligente.
Préview Guide d'installation du support de réservoir de toilette ERIDANUS
Guide d'installation complet pour le support de réservoir de toilette ERIDANUS, détaillant les outils, les pièces et les instructions étape par étape pour une installation correcte dans différents types de murs.
Préview Manuel d'utilisation des toilettes intelligentes Eridanus : caractéristiques, installation et dépannage
Manuel d'utilisation complet des toilettes intelligentes Eridanus, couvrant la configuration, les fonctionnalités, le fonctionnement, l'installation, la maintenance et le dépannage. Apprenez à utiliser vos toilettes intelligentes pour un confort et une hygiène optimaux.
Préview Manuel d'utilisation des toilettes intelligentes ERIDANUS ERI-ST210-S : Caractéristiques, installation et dépannage
Manuel d'utilisation complet des toilettes intelligentes ERIDANUS ERI-ST210-S. Découvrez leurs fonctionnalités, le guide d'installation, le fonctionnement, l'entretien et les conseils de dépannage pour une utilisation optimale.
Préview Guide d'installation des toilettes intelligentes ERIDANUS
Guide d'installation complet des toilettes intelligentes ERIDANUS, incluant le déballage, la préparation, les étapes d'installation et les vérifications finales. Comprend la liste des pièces et les outils nécessaires à une installation correcte.