Manuel d'utilisation du masseur de mollets intelligent UREVO (modèle Urevo-lm01)

1. Introduction

Thank you for choosing the UREVO Smart Calf Massager. This device is designed to provide dynamic air compression massage, promoting circulation, muscle relaxation, and recovery. Featuring AI massage adaptation, three modes, three intensity levels, and adjustable heat, it offers a personalized experience. This manual provides essential information for safe and effective use of your massager.

Image: The UREVO Smart Calf Massager in use, demonstrating its application on the calves with the accompanying mobile application.

2. Consignes de sécurité

Please read all safety instructions carefully before using the UREVO Smart Calf Massager. Failure to follow these instructions may result in injury or damage to the device.

• Suivez toujours les instructions fournies dans ce manuel d’utilisation.
• Do not use the massager if you have any medical conditions, are pregnant, or have any injuries or skin conditions in the area to be massaged. Consult a healthcare professional if you have concerns.
• Keep the massager away from water and do not use it while sleeping or taking a bath.
• Ne laissez pas l'appareil de massage sans surveillance pendant son utilisation.
• If you experience any discomfort or pain, stop using the massager immediately and consult a healthcare professional.
• Keep the massager clean and dry to prevent any electrical hazards.

3. Contenu du colis

Verify that all items are present in your UREVO Smart Calf Massager package:

• 2 x UREVO Relax Massagers (Left and Right)
• 1 x Storage Bag (Tote)
• 2 câbles de chargement de type C
• 1 x Guide de démarrage rapide (QSG)

Image: Visual representation of the UREVO Smart Calf Massager package contents.

4. Composants du produit

Familiarize yourself with the main components and controls of your UREVO Smart Calf Massager:

• Mode Selection / Exit Pause Button (M): Cycles through massage modes.
• Intensity Control / Pairing Button: Adjusts air pressure intensity. Press both left and right buttons simultaneously for 3 seconds to enter/exit pairing mode.
• Bouton de chauffage : Cycles through 3 heating temperature levels.
• Power / Vibration / Travel Lock Button: Press and hold for 3 seconds to power on/off. Press and hold for 5 seconds to enter/exit travel lock mode. In power-on status, press once to adjust vibration intensity (3 levels).
• Voyant d'état de la batterie : Indique le niveau de la batterie.
• Port de charge : Port de type C pour le chargement.

Image: Detailed diagram of the massager's control panel and charging port.

5. Installation

5.1 Chargement de l'appareil

Before first use, fully charge both massagers using the provided Type-C charging cables. The massagers feature a 2500mAh battery, providing up to 150 minutes of use on a full charge.

Image: The massager's long battery life allows for extended relaxation.

5.2 Fitting the Massager

The UREVO Smart Calf Massager is designed with high-elastic materials and an adjustable magic tape for a secure and comfortable fit. It accommodates calves up to 18.9 inches (upper circumference), 14.2 inches (lower circumference), and 13 inches in length. Ensure the massager is snug but not overly tight to allow for proper air compression.

Image: Fitting guide for the UREVO Smart Calf Massager.

5.3 Téléchargement et connexion de l'application

For advanced features and personalized control, download the UREVO SmartCoach app from your device's app store. Follow the in-app instructions to connect your massagers via Bluetooth. The app allows for smart comfort detection and custom massage settings.

Image: The UREVO SmartCoach app provides enhanced control and customization.

6. Mode d'emploi

6.1 Mise sous/hors tension et verrouillage de transport

• To power on or off, press and hold the Power button for 3 seconds.
• To enter or exit travel lock mode, press and hold the Power button for 5 seconds.

6.2 Sélection des modes de massage

The massager offers three primary modes: Relax, Recovery, and Shaping. You can switch between these modes using the 'M' button on the device or through the UREVO app.

Image: The massager can be controlled via its physical buttons or the UREVO app.

6.3 Adjusting Intensity and Heat

• Intensité: There are 3 adjustable air pressure intensity levels. Use the Intensity Control button on the device or the app to adjust.
• Chaleur: Choose from 3 adjustable heat settings (Low, Mid, High) using the Heat button on the device or the app.

Image: The massager offers three heating levels to enhance comfort and circulation.

6.4 modes de vibration

The massager includes 3 vibration modes to further relieve muscle tension. In power-on status, press the Power button once to cycle through the vibration intensities. Note: Using the vibration function at intensity level 3 may produce some noise.

Image: Three vibration modes are available for targeted muscle relief.

6.5 AI Massage Adaptation and Customization

The UREVO SmartCoach app utilizes an advanced algorithm to detect muscle discomfort and assess your leg condition. It recommends the most effective massage mode and intensity for personalized relief. You can also customize settings for each leg independently via the app.

Image: The UREVO app's Smart Pain Detection feature offers personalized massage settings.

6.6 Couplage et dissociation

To pair or unpair the left and right massagers for synchronized or independent control, press both Intensity Control buttons simultaneously for 3 seconds. After pairing, the first 'M' level indicator turns blue, enabling One-Click Control. After unpairing, the 'M' indicator turns white, allowing independent control.

6.7 Durée d'utilisation

After 40 minutes of continuous use, allow a 5-minute break before reusing the massager to ensure optimal performance and device longevity.

6.8 Vidéos officielles du produit

For visual guidance on using your UREVO Smart Calf Massager, please refer to the official product videos below:

7. Entretien

To ensure the longevity and hygiene of your UREVO Smart Calf Massager:

• Clean the massager regularly with a soft, damp tissu.
• N’utilisez pas de nettoyants abrasifs et n’immergez pas l’appareil dans l’eau.
• Store the massager in a cool, dry place, preferably in its original tote bag, when not in use.

Image: The included tote bag facilitates easy storage and transport.

8. Dépannage

If you encounter any issues with your UREVO Smart Calf Massager, please refer to the following common solutions:

• L'appareil ne s'allume pas : Assurez-vous que l'appareil est complètement chargé. Branchez-le à une source d'alimentation à l'aide du câble USB-C et laissez-le charger pendant au moins 30 minutes avant de tenter de le rallumer.
• Absence de compression ou compression faible : Check that the massager is properly fitted and secured around your calf. Ensure the air compression settings are adjusted to your desired intensity level.
• Problèmes de connectivité de l'application : Make sure Bluetooth is enabled on your smartphone and the massagers are powered on and within range. Try restarting both the app and the massagers.
• Inconfort lors de l'utilisation : Immediately stop using the massager. Re-adjust the fit, reduce the intensity, or lower the heat setting. If discomfort persists, discontinue use and consult a healthcare professional.

9. Spécifications

10. Garantie et assistance

For warranty information and customer support, please refer to the Quick Start Guide included in your package or visit the official UREVO website. Conservez votre reçu d’achat pour les réclamations au titre de la garantie.