Introduction
Thank you for choosing the WOLFBOX MF100. This comprehensive device combines a powerful electric air duster and a robust 3000A jump starter with an integrated air compressor. Designed for versatility, it provides solutions for cleaning electronics, inflating tires, and jump-starting vehicles. Please read this manual thoroughly before operation to ensure safe and efficient use.
Qu'y a-t-il dans la boîte ?
À l'ouverture du colis, vérifiez que tous les composants sont présents et en bon état. Le colis standard comprend :
- WOLFBOX 3000A Jump Starter with Air Compressor
- Dépoussiéreur électrique WOLFBOX MF100
- Câbles de démarrage intelligents
- Câble de chargement USB-C
- Air Nozzles for Air Compressor (various types)
- Air Duster Nozzles (5 types)
- Cleaning Brushes for Air Duster (2 types)
- Étui de rangement
- Manuel d'utilisation
Installation
Jump Starter et Compresseur D'air
- Charge initiale: Before first use, fully charge the jump starter unit using the provided USB-C cable. The display will indicate charging status.
- Connexion des accessoires : For air compression, connect the air hose to the designated port on the unit. Select and attach the appropriate nozzle for your inflation needs (e.g., tire valve, ball needle).
Dépoussiéreur électrique
- Fixation de la buse : Select the desired nozzle or brush for your cleaning task. Align the nozzle with the air outlet of the duster and push firmly until it clicks into place.
- Chargement : Ensure the air duster is charged before use. Connect it to a USB power source using its charging cable.
Mode d'emploi
Using the 3000A Jump Starter
- Connecter Clamps: Ensure the jump starter is off. Connect the red clamp à la borne positive (+) de la batterie déchargée du véhicule et au fil noiramp à la borne négative (-).
- Se connecter au démarreur : Plug the smart jumper cable connector into the jump starter's port.
- Démarrer le véhicule : Once connected, turn on the jump starter. The display will show readiness. Attempt to start your vehicle. If it doesn't start immediately, wait 30 seconds before trying again.
- Déconnecter: After the vehicle starts, disconnect the smart jumper cable from the jump starter first, then remove the black clamp, suivi du cl rougeamp de la batterie.
Using the 160PSI Air Compressor
- Raccorder le tuyau : Attach the air hose to the tire valve or item to be inflated.
- Régler la pression : Turn on the unit. Use the controls to set the desired pressure (PSI, BAR, KPA). The current pressure will be displayed.
- Démarrer l'inflation : Appuyez sur le bouton de gonflage pour démarrer. Le compresseur s'arrêtera automatiquement une fois la pression préréglée atteinte.
- Déconnecter: Remove the air hose from the item.
Using the Electric Air Duster
- Mise sous tension : Press and hold the power button to turn on the duster.
- Régler la vitesse : Briefly press the power button to cycle through the 3 available speed settings (40,000 RPM, 80,000 RPM, 150,000 RPM).
- Flux d'air direct : Aim the nozzle at the area to be cleaned. Use short bursts for delicate items or continuous airflow for larger areas.
- Éteindre: Press and hold the power button to turn off the duster.
Fonctionnalité de la banque d'alimentation
The jump starter unit also functions as a power bank. Connect your devices (phones, tablets, etc.) to the USB-C (65W) or USB-A (12W/18W) ports for charging. The 160W DC continuous output can power other compatible devices.
Entretien
- Nettoyage: Wipe both units with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no moisture enters the ports.
- Entretien de la batterie: For optimal battery life, fully charge both the jump starter and air duster every 3-6 months, even if not in use. Avoid storing in extreme temperatures.
- Stockage: Store the units and accessories in the provided storage case in a cool, dry place, away from direct sunlight and moisture.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Le démarreur ne s'allume pas/ne charge pas. | Batterie faible ; câble/adaptateur de charge défectueux. | Charge the unit fully. Try a different USB-C cable and power adapter. |
| Le véhicule ne démarre pas avec un démarreur de secours. | Clé incorrecteamp connection; battery too deeply discharged; vehicle issue. | Assurez-vous que clamps are connected correctly (red to +, black to -). Ensure jump starter is fully charged. Consult a mechanic if vehicle issues persist. |
| Air Compressor not inflating. | Hose not securely connected; incorrect pressure setting; low unit battery. | Check hose connection. Verify pressure setting. Charge the unit. |
| Electric Air Duster not blowing. | Low battery; nozzle blockage. | Charge the duster. Check for and clear any obstructions in the nozzle or air intake. |
Caractéristiques
- WOLFBOX MF100 Electric Air Duster:
- Régime maximum: 150,000 tr / min
- Max Wind Speed: 45 m/s
- Speed Settings: 3 (40,000 RPM, 80,000 RPM, 150,000 RPM)
- Nozzles: 5 types
- Brushes: 2 types
- Poids : environ 0.66 kg (0.3 lb)
- Dimensions: L6.2*W1.6*H2.4 inches (L16*W4*H6 cm)
- WOLFBOX 3000A Jump Starter with Air Compressor:
- Courant de crête : 3000 A
- Capacité de la batterie : 16000 mAh
- Engine Compatibility: Up to 8L Gas / 6L Diesel
- Air Compressor Pressure: 160 PSI (Max)
- Airflow Rate: 45 liters per minute
- Charging Ports: USB-C 65W, USB-A 12W/18W
- DC Output: 160W continuous
Garantie et assistance
WOLFBOX products are designed for reliability and performance. For any questions, technical assistance, or warranty claims, please contact WOLFBOX customer support. Refer to the product packaging or the official WOLFBOX website pour les informations de contact les plus récentes.
Website: www.wolfbox.com
