1. Produit terminéview
The Satco S11520 ST19 LED bulb combines classic design with modern energy efficiency. This 6-watt LED bulb is designed to replace a traditional 40-watt incandescent bulb, providing 500 lumens of warm 2700K illumination. Its vintage ST19 shape, clear glass housing, and flex gray coil filament offer a decorative aesthetic suitable for various fixtures. The bulb features a standard medium E26 base, is fully dimmable on 120V circuits, and is rated for use in enclosed fixtures and wet locations.
Figure 1 : Face avant view of the Satco S11520 ST19 LED Bulb, showcasing its clear glass and flex gray coil filament.
Caractéristiques principales :
- VintagConception : ST19 shape with clear glass and gray flex coil filament for a classic aesthetic.
- Efficacité énergétique : 6W LED replaces 40W incandescent, delivering 500 lumens.
- Lumière blanche chaude : 2700K color temperature for a comfortable and inviting glow.
- Gradable : Compatible with most standard 120V dimmer switches for adjustable light levels.
- Rendu des couleurs élevé : CRI of 93+ ensures accurate and vibrant color representation.
- Large compatibilité : Medium E26 base fits most standard household fixtures.
- Durable: Rated for 15,000 hours of operation and suitable for enclosed fixtures and wet locations.
2. Consignes de sécurité
Veuillez lire et comprendre toutes les consignes de sécurité avant d'installer ou d'utiliser ce produit. Le non-respect de ces consignes peut entraîner un choc électrique, un incendie ou d'autres dangers.
- Éteindre: Always turn off the power to the fixture at the circuit breaker or fuse box before installation, removal, or inspection.
- Vol appropriétage: Assurer le vol d'alimentationtage is 120V AC, 60Hz. This bulb is designed for 120V circuits only.
- Compatibilité des appareils : Use only in fixtures designed for light bulbs with a medium E26 base.
- Poids: Do not exceed the weight limit of the fixture. This bulb weighs approximately 2.72 ounces.
- Manutention: Handle the bulb by its base, not the glass, to avoid breakage or damage.
- Température: Do not use in environments where the operating temperature exceeds the bulb's rating (-4°F to +113°F / -20°C to +45°C).
- Élimination: Éliminez les ampoules usagées conformément à la réglementation locale.
- Variateurs : Lors de l'utilisation d'un variateur, assurez-vous de sa compatibilité avec les ampoules LED. Un variateur incompatible peut provoquer un scintillement ou endommager l'ampoule.
3. Installation
Follow these steps to safely install your Satco S11520 LED bulb:
- Couper l'alimentation : Before beginning, ensure the power to the light fixture is completely turned off at the circuit breaker or wall switch.
- Retirer l'ancienne ampoule : Dévissez soigneusement l'ampoule en place. Laissez-la refroidir si elle a été utilisée récemment.
- Inspecter l'appareil : Check the fixture for any damage or loose wiring. Ensure the socket is clean and dry.
- Installer une nouvelle ampoule : Gently screw the Satco S11520 LED bulb into the E26 medium base socket until it is snug. Do not overtighten.
- Restaurer l'alimentation : Remettez le courant au niveau du disjoncteur ou de l'interrupteur mural.
- Test: Allumez l'interrupteur pour vérifier que l'ampoule fonctionne correctement.
Figure 2: Dimensions of the Satco S11520 ST19 LED Bulb, showing its E26 medium base.
This bulb is suitable for use in enclosed fixtures and wet locations, offering versatility for various indoor and covered outdoor applications.
4. Mode d'emploi
The Satco S11520 LED bulb operates like a standard light bulb but offers dimming capabilities and energy efficiency.
- Activation/désactivation : Use your existing wall switch to turn the light on or off.
- Fonction de gradation: If connected to a compatible LED dimmer switch, adjust the dimmer control to achieve your desired brightness level. The bulb supports smooth dimming down to soft accent levels.
- Rendement lumineux : This bulb provides 360° omnidirectional lighting, ensuring consistent and balanced illumination in your space.
5. Entretien
The Satco S11520 LED bulb requires minimal maintenance due to its long lifespan.
- Nettoyage: Assurez-vous que l'appareil est hors tension avant de le nettoyer. Essuyez l'ampoule avec un chiffon doux et sec. N'utilisez pas de nettoyants liquides ni de produits abrasifs.
- Remplacement: This LED bulb has an average life of 15,000 hours. When replacement is needed, follow the installation steps in Section 3.
6. Dépannage
If you encounter issues with your Satco S11520 LED bulb, refer to the following common troubleshooting steps:
| Problème | Cause possible | Solution |
|---|---|---|
| L'ampoule ne s'allume pas. | Absence d'alimentation au niveau du luminaire, connexion desserrée ou ampoule défectueuse. |
|
| L'ampoule vacille ou bourdonne. | Interrupteur variateur incompatible ou alimentation électrique instable. |
|
| L'éclairage est trop faible ou trop intense. | Dimmer setting or incorrect bulb for application. |
|
If the problem persists after trying these steps, please contact Satco customer support.
7. Spécifications
Detailed technical specifications for the Satco S11520 ST19 LED Bulb:
| Attribut | Valeur |
|---|---|
| Numéro de modèle | S11520 |
| Marque | Satco |
| Type d'ampoule | DIRIGÉ |
| Forme de l'ampoule Taille | ST19 |
| Quoitage | 6 watts |
| Équivalent à incandescence | 40 watts |
| Luminosité | 500 lumens |
| Température de couleur | 2700 Kelvin (blanc chaud) |
| Indice de rendu des couleurs (IRC) | 93+ |
| Type de base | E26 (Moyen) |
| Voltage | 120 V c.a. |
| Gradable | Oui |
| Angle du faisceau | Omnidirectionnel à 360° |
| Durée de vie moyenne | 15,000 heures |
| Température de fonctionnement | -4°F à +113°F (-20°C à +45°C) |
| Classement de l'emplacement | Wet Location Rated, Enclosed Fixture Rated |
| Dimensions (L x P) | 5.31" x 2.28" (134.87 mm x 57.91 mm) |
| Poids de l'article | 2.72 onces |
| Code UPC | 045923115202 |
Figure 3: Product packaging displaying key specifications for the Satco S11520 ST19 LED Bulb.
Figure 4: Lighting Facts label, detailing brightness, energy cost, life, and light appearance for the Satco S11520 ST19 LED Bulb.
8. Garantie et assistance
The Satco S11520 LED bulb is backed by a Garantie limitée de 3 ansCette garantie couvre les défauts de matériaux et de fabrication dans des conditions normales d'utilisation et d'entretien.
For warranty claims, technical assistance, or any questions regarding your product, please contact Satco customer support. Keep your proof of purchase for warranty validation.
Satco Customer Support:
- Refer to the official Satco website pour les coordonnées.
- Provide the model number (S11520) when contacting support.
