Produit terminéview
This manual provides essential information for the safe and efficient use of your POWTREE 18V 8.0Ah LXT Lithium-ion Replacement Battery. Please read this manual thoroughly before use and retain it for future reference.
Image: Two POWTREE 18V 8.0Ah LXT Lithium-ion Replacement Batteries, showcasing their design and 8.0Ah capacity.
Installation
Charge initiale
Before first use, it is recommended to fully charge the battery. Use a compatible 18V LXT charger. The battery features an LED indicator to display the charging status.
Compatibilité
The POWTREE 18V 8.0Ah LXT Lithium-ion Replacement Battery is 100% compatible with all 18-volt LXT tools and chargers. This includes models such as BL1830, BL1840, BL1850, BL1860, BL1815, BL1845, BL1835, 194205-3, 194309-1, 194204-5, bcl180, bcl180fbcl180w, bcl180z, bcl180zw, and LXT400 series tools.
Image: A POWTREE battery highlighting its LED charge indicators, which show the remaining power in three stages (80-100%, 40-80%, 10-40%).
Image: Visual representation of the battery's key specifications: 8000mAh capacity, 18V voltage, Lithium-ion type, and new condition.
Image: Features of the POWTREE battery including LED indicators, a quick button for checking charge, an accurate interface for tool connection, and claims of extended life and running time, along with over 1000 charging cycles.
Mode d'emploi
Insertion et retrait de la batterie
Align the battery with the battery slot on your compatible 18V LXT power tool. Slide the battery firmly until it clicks into place. To remove, press the release button (if applicable on your tool) and slide the battery out.
Utilisation générale
This Lithium-ion battery has no memory effect, allowing it to be charged or discharged as needed without loss of capacity. It also features low self-discharge, retaining its charge for longer periods when not in use.
Indicateur de niveau de charge LED
The battery is equipped with an LED indicator to show the remaining power. Press the confirmation button on the battery to display the three stages of remaining capacity:
- 80%-100% : Full to near-full charge.
- 40%-80% : Tarif modéré.
- 10%-40% : Batterie faible, pensez à recharger bientôt.
If no lights flash, it may indicate a "Failure Diagnosis." In such cases, please refer to the Troubleshooting section or contact customer support.
Image: The POWTREE battery integrated into various 18V power tools, demonstrating its versatility and high-efficiency performance in different applications.
Image: Diagram illustrating the intelligent MCU chip protection features of the POWTREE battery, including safeguards against overload, over-discharge, and overheating to enhance battery life and safety.
Entretien
Pratiques de facturation
To maximize battery lifespan, avoid consistently over-charging or completely over-discharging the battery. The battery's rapid-charge technology and built-in protections help prevent these issues, but good charging habits are still recommended.
Stockage
Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is advisable to store the battery with a partial charge (around 50%).
Nettoyage
Keep the battery contacts clean and free from dust and debris. Use a dry cloth to wipe the battery exterior as needed.
Caractéristiques de sécurité
The battery incorporates several safeguard features to ensure safe operation:
- Protection contre les surcharges : Allows the battery and tools to communicate to prevent overload.
- Protection contre les décharges excessives : Extends battery life by stopping tools when battery capacity is low.
- Protection contre la surchauffe : Monitors battery temperature, stopping tools before the battery is damaged.
Dépannage
Problèmes courants et solutions
| Problème | Cause possible | Solution |
|---|---|---|
| La batterie ne charge pas. | Charger not connected, battery too hot/cold, charger malfunction, battery fault. | Ensure charger is properly connected. Allow battery to reach room temperature. Try a different charger. If no LED lights flash, contact support. |
| La batterie n'alimente pas l'outil. | Battery discharged, poor connection, tool malfunction, battery fault. | Check LED indicator for charge level and recharge if necessary. Ensure battery is fully seated in the tool. Test with another battery or tool. If issues persist, contact support. |
| LED indicator shows "Failure Diagnosis" (no lights flash). | Internal battery fault. | Cessez immédiatement l'utilisation. Ne tentez pas de réparation. Contactez le service client pour obtenir de l'aide. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Type de batterie | Li-ion |
| Voltage | 18V |
| Capacité | 8000 mAh (8.0 Ah) |
| Couleur | Noir |
| Dimensions (L x l x H) | 5.98 x 5.24 x 3.98 pouces |
| Poids de l'article | 12.3 onces |
| Fabricant | POWTRE |
| Numéro de modèle | BL1830 (Compatible with BL1815, etc.) |
| Cycle de vie | >1000 fois |
Garantie et assistance
Informations sur la garantie
POWTREE provides the following warranty for this product:
- 30 jours : Full refund and return policy.
- 365 jours : Limited warranty from the date of purchase.
Assistance clientèle
If you have any concerns about this item or require assistance, please feel free to contact POWTREE customer service. We aim to provide 24-hour service to ensure an enjoyable shopping experience.
For support, please visit the POWTREE store on Amazon or use the contact methods provided with your purchase documentation.
