Manuel d'utilisation du fauteuil roulant électrique pliable Rubicon DX07

1. Introduction

The Rubicon DX07 is a lightweight, foldable electric wheelchair designed for versatile mobility across various terrains. This manual provides essential information for safe operation, assembly, maintenance, and troubleshooting to ensure optimal performance and user safety.

2. Consignes de sécurité

• Always fasten the adjustable safety belt before operating the wheelchair.
• Ensure the electromagnetic brake system is functioning correctly for smooth and safe stops.
• Verify anti-tip wheels are properly adjusted and secured to prevent tipping.
• Exercise caution on steep slopes, uneven terrain, and gravel. The all-terrain capability is designed to assist, but user vigilance is crucial.
• Do not operate the wheelchair if the battery is critically low or if any components appear damaged.
• Gardez vos mains et vos vêtements éloignés des pièces mobiles, en particulier des roues et des moteurs.

3. Contenu du colis

Upon unboxing your Rubicon DX07, please ensure all the following components are present:

• Rubicon DX07 Electric Wheelchair Frame
• Detachable 10AH Lithium Battery
• Chargeur de batterie
• 360-degree Joystick Controller
• Panier de rangement arrière
• Seat Cushion and Backrest Cover
• Porte-gobelet
• Lampe USB
• Manuel de l'utilisateur (ce document)

4. Configuration et assemblage

4.1 Déplier le fauteuil roulant

The Rubicon DX07 features a simple one-step folding mechanism for quick deployment.

Image: The Rubicon DX07 Electric Wheelchair in its ready-to-use, unfolded state, with a remote control shown nearby.

4.2 Attaching the Joystick Controller

The joystick can be attached to either the left or right armrest for user preference. Securely tighten the bolt after attachment.

4.3 Installing the Seat Cushion and Backrest

Place the breathable seat cushion onto the seat frame and press down to secure. The backrest cover is typically pre-installed or easily attached via Velcro.

4.4 Connexion de la batterie

Locate the battery compartment beneath the seat. Insert the detachable battery and ensure it clicks securely into place. Connect the battery lead to the wheelchair's power system.

4.5 Securing Anti-Tip Wheels

The anti-tip wheels are crucial for stability. Ensure they are properly extended and secured with the provided pins at the desired height setting.

4.6 Visual Guide: Setup and Operation

Video: This video demonstrates the unfolding, battery connection, controller attachment, and basic operation of the Rubicon DX07 electric wheelchair.

5. Mode d'emploi

5.1 Mise sous/hors tension

Press the power button on the joystick controller to turn the wheelchair on or off. The battery indicator lights will illuminate upon activation.

5.2 Contrôle par manette

The 360-degree joystick provides precise control over movement. Gently push the joystick in the desired direction to move. The controller also features:

• Réglage de la vitesse: Utilisez les boutons « + » et « - » pour augmenter ou diminuer la vitesse.
• Corne: Appuyez sur le bouton du klaxon pour alerter les autres.
• Appel SOS : Activate the SOS function in emergencies.

Image : Une image détaillée view of the joystick controller, highlighting the power, speed, horn, and SOS buttons.

5.3 Switching Between Electric and Manual Mode

To switch to manual mode, disengage the motor clutches located near the rear wheels. To re-engage electric mode, push the clutches back into position.

5.4 Using the Safety Belt

Always fasten the adjustable safety belt securely across your lap before operating the wheelchair to ensure safety and stability.

5.5 Télécommande Bluetooth

The Rubicon DX07 can be operated remotely via Bluetooth, offering assistance options for caregivers or in situations where direct joystick control is not feasible.

Image: A hand holding the Bluetooth remote control, which can be used to operate the wheelchair from a distance.

6. Caractéristiques

• Ultra-léger et pliable : Weighing approximately 40 lbs, the DX07 folds in 3 seconds for easy transport and storage, fitting into most car trunks.
• Deux moteurs puissants : Equipped with two 500W motors for superior traction and all-terrain capability, handling slopes and varied surfaces.
• Système de freinage électromagnétique : Ensures smooth, reliable, and safe stopping.
• Extended Cruise Range: The detachable, airline-compliant 10AH battery provides a cruise range of up to 12 miles.
• Confort et commodité : Features a footrest that collapses inward for easier standing, double-joint armrests that lift for closer access to tables, hydraulic anti-tilt support, and breathable, detachable seat/backrest cushions for easy cleaning.
• Enhanced Safety & Durability: Includes puncture-free rubber wheels and a robust aluminum frame.

Image: The Rubicon DX07 showcasing its lightweight design and easy folding for portability.

Image: The Rubicon DX07 illustrating its easy access design for front or side entry.

7. Entretien

7.1 Entretien de la batterie

Charge the battery regularly. The detachable battery can be charged either while installed on the wheelchair or removed. A full charge takes approximately 6 hours.

7.2 Nettoyage

The seat cushion and backrest cover are made of air-breeze material and can be detached for washing. Wipe down the frame and other non-removable parts with a damp tissu.

7.3 Contrôles réguliers

Periodically inspect tires for wear, check brake functionality, and ensure all connections and fasteners are secure.

8. Dépannage

• Pas d'alimentation : Check if the battery is properly connected and charged. Ensure the power button on the joystick is pressed.
• Wheelchair Not Moving: Verify that the motor clutches are engaged (electric mode). Check for any obstructions around the wheels.
• Joystick non réactif : Ensure the joystick cable is securely connected.
• For persistent issues, please refer to the detailed troubleshooting section in the full manual or contact customer support.

9. Spécifications

10. Garantie et assistance

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt and product serial number handy for faster assistance.