1. Introduction
This manual provides essential instructions for the safe and effective use of your Monport 30W Fiber Laser Engraver, Model GM-30. This integrated mini fiber laser marking machine is designed for precise engraving and marking on various metal and non-metal materials. Please read this manual thoroughly before operating the device to ensure proper setup, operation, and maintenance.
2. Consignes de sécurité
WARNING: This product is a Class 4 laser device. Direct exposure to the laser beam can cause severe eye injury and skin burns. Always wear appropriate laser safety glasses when operating the machine. Never look directly into the laser beam or allow others to do so.
- Veillez à ce que la zone de travail soit bien ventilée afin de dissiper les fumées générées lors de la gravure.
- Keep flammable materials away from the laser working area.
- Do not operate the machine if any covers are removed or safety interlocks are bypassed.
- Toujours couper l'alimentation électrique avant d'effectuer toute opération de maintenance ou de nettoyage.
- Superviser la machine pendant son fonctionnement.
- Familiarisez-vous avec les procédures d'arrêt d'urgence.
3. Produit terminéview
The Monport 30W Fiber Laser Engraver (Model GM-30) is a compact and powerful tool for high-precision marking. It features a 30W fiber laser source with a lifespan of up to 100,000 hours, capable of engraving various metals and some non-metals.
Caractéristiques principales :
- Integrated Mini Design: Compact et léger pour un placement polyvalent.
- High-Speed Marking: Achieves speeds up to 10,000 mm/s with a customized galvanometer system.
- Gravure de précision : Features a carving accuracy of 0.01mm with an F-theta field mirror.
- Zone de travail optimale : A 150mm x 150mm (5.9" x 5.9") marking area ensures consistent engraving quality across the entire surface.
- Compatibilité matérielle : Suitable for engraving all metals (gold, silver, copper, stainless steel, brass, titanium, aluminum, platinum) and certain plastics.
- Compatibilité logicielle: Supports LightBurn and includes free BSLcad software.
- Deep Engraving & Cutting: Capable of 2.5D metal engraving, deep metal engraving, and some metal sheet cutting.
- Pointeur à point rouge : Assists in positioning the engraving area.
Figure 1: Monport 30W Fiber Laser Engraver, Model GM-30. This image displays the complete laser engraving unit, highlighting its compact and integrated design.
Figure 2 : Plusview of key features including 10000mm/s max marking speed, LightBurn/BSLcad software compatibility, 30W fiber laser power, 150x150mm marking area, sub-micron accuracy, wide material compatibility, and metal 3D engraving/cutting capabilities.
Figure 3: This image details the physical dimensions (370mm x 300mm x 550mm), product weight (15.5kg/34lbs), expected service life (100,000 hr), compatible software (LightBurn, BSLcad), compatible operating systems (Windows, macOS), max engraving speed (10000mm/s), and max Z-height (350mm).
Figure 4: Illustration highlighting the high engraving speed of up to 10,000 mm/s, demonstrating the efficiency of the Monport fiber laser compared to other systems.
Figure 5: Visual representation of the 0.01mm ultra-fine spot precision, showcasing the machine's capability to clearly display intricate details in engravings.
Figure 6: Illustration of various materials compatible with the Monport fiber laser, including stainless steel, aluminum, brass, silver, plastic, platinum, titanium, and gold.
4. Installation
4.1 Déballage et inspection
- Retirez soigneusement le graveur laser et tous ses accessoires de leur emballage.
- Inspect the machine for any signs of damage during transit. Contact Monport support immediately if damage is found.
- Verify all included components are present: Fiber Laser Engraver, power cable, USB drive (containing software and parameters), and any ordered accessories.
4.2 Configuration physique
- Placez la machine à graver sur une surface stable et plane, dans un endroit bien ventilé.
- Ensure adequate space around the machine for operation and heat dissipation.
- Branchez le câble d'alimentation à la machine, puis à une prise électrique mise à la terre.
- Connectez la machine à votre ordinateur à l'aide du câble USB fourni.
4.3 Installation du logiciel
The Monport 30W Fiber Laser Engraver is compatible with LightBurn and includes BSLcad software on the provided USB drive.
- Insérez la clé USB dans votre ordinateur.
- Install the BSLcad software following the instructions on the USB drive. This drive also contains backup parameters.
- If using LightBurn, download and install the latest version from the official LightBurn website. Follow LightBurn's setup guide for connecting to a fiber laser.
5. Mode d'emploi
5.1 Flux de travail des opérations de base
- Mise sous tension : Mettez en marche l'interrupteur principal de la graveuse.
- Lancement du logiciel : Open your chosen software (LightBurn or BSLcad) on your computer.
- Création/importation de design : Create your design or import an existing file dans le logiciel.
- Emplacement du matériel : Placez le matériau à graver sur la plateforme de travail.
- Réglage de la mise au point : Adjust the Z-axis height to achieve proper focus. The red dot pointer can assist in finding the focal point. Ensure to remove the lens cap if present.
- Paramètres des paramètres: Set appropriate laser parameters (power, speed, frequency, passes) based on the material and desired effect. Refer to material testing guides for optimal settings.
- Encadrement: Utilisez la fonction de cadrage du logiciel pour pré-représenterview the engraving area on your material. The red dot pointer will outline the job area.
- Commencer la gravure : Ensure all safety precautions are in place, wear safety glasses, and then initiate the engraving process from the software.
Figure 7: Illustration of the 150mm x 150mm optimal marking area. This image emphasizes that this specific area is designed for consistent engraving quality, preventing distortion at edges.
5.2 Deep Engraving and Cutting
The 30W fiber laser is capable of deep engraving and cutting on certain metals. For deeper results or faster processing, higher power settings and multiple passes may be required. For significantly stronger and faster results in deep engraving or cutting, a 50W or higher power machine is recommended.
5.3 Utilisation des accessoires
Optional accessories such as a rotary axis, protection enclosure, or fume extractor can enhance the machine's capabilities and safety. Refer to the specific accessory's manual for installation and operation instructions.
Figure 8: Display of available accessories including a rotary axis for cylindrical objects, a protection enclosure for enhanced safety, and a fume extractor for air quality management.
6. Entretien
- Nettoyage des lentilles : Regularly inspect and clean the F-theta lens and protective window using lens cleaning solution and specialized wipes to maintain optimal laser performance.
- Nettoyage général : Keep the machine free of dust and debris. Use a soft, dry cloth to wipe down exterior surfaces.
- Ventilation: Ensure the ventilation openings on the machine are not obstructed to prevent overheating.
- Mises à jour logicielles : Keep your engraving software updated to the latest version for optimal performance and compatibility.
7. Dépannage
- Aucune émission laser :
- Check if the machine is powered on and connected to the computer.
- Vérifiez que le bouton d'arrêt d'urgence n'est pas actionné.
- Ensure the software is properly connected to the machine and the laser is enabled.
- Confirm that the lens cap has been removed from the laser head.
- Mauvaise qualité de gravure :
- Check the focus. Incorrect focus is a common cause of blurry or weak engravings.
- Adjust laser parameters (power, speed, frequency) for the specific material.
- Clean the F-theta lens and protective window for any dust or residue.
- Ensure the material is flat and securely placed on the working platform.
- Problèmes de connexion logicielle :
- Redémarrez la machine et l'ordinateur.
- Vérifiez la connexion du câble USB. Essayez un autre port USB ou un autre câble.
- Ensure correct drivers are installed for the machine.
- Red Dot Pointer Not Visible/Accurate:
- Verify the red dot pointer is enabled in the software.
- If the red dot is not aligned with the laser path, recalibration may be necessary (refer to advanced software settings or Monport support).
8. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Marque | Monport |
| Numéro de modèle | GM-30 (YXF30) |
| Puissance du laser | 30W (Peak power up to 8 kW) |
| Cours de laser | Classe 4 |
| Max. Vitesse de gravure | 10,000 mm/s (393.7 ips) |
| Précision de la sculpture | 0.01 mm |
| Zone de travail | 150 mm x 150 mm (5.9 po x 5.9 po) |
| Max Z-Height | 350 mm |
| Durée de vie | Jusqu'à 100,000 XNUMX heures |
| Logiciels compatibles | LightBurn, BSLcad |
| Systèmes d'exploitation compatibles | Windows, macOS |
| Matériel | Aluminium |
| Poids du produit | 15.5 kg (34 lb) |
| Composants inclus | Graveur laser à fibre |
9. Garantie et assistance
For warranty information, please refer to the documentation included with your purchase or visit the official Monport website. For technical support, troubleshooting assistance, or inquiries regarding replacement parts, please contact Monport customer service.
Politique de retour: A 30-day return/replacement policy is typically offered. Please check your purchase details for specific terms.
Magasin Monport : Visitez la boutique Monport sur Amazon
