LINOVISION ANT-5GCombo7

LINOVISION 5G LTE MIMO Combo 7-in-1 Antenna (ANT-5GCombo7) User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the LINOVISION 5G LTE MIMO Combo 7-in-1 Antenna (Model ANT-5GCombo7). This antenna is designed for outdoor use, offering comprehensive connectivity with 4x 5G LTE, 2x Wi-Fi, and 1x GNSS capabilities. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Contenu du colis

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact LINOVISION support.

LINOVISION 5G LTE MIMO Combo 7-in-1 Antenna and User Manual
Image: Package Contents. The image displays the LINOVISION 5G LTE MIMO Combo 7-in-1 Antenna with its multiple cables and a small user manual booklet.

3. Spécifications

The LINOVISION ANT-5GCombo7 antenna features robust design and comprehensive connectivity options.

FonctionnalitéDescription
Type d'antenne7-in-1 Combo (4x 5G LTE MIMO, 2x Wi-Fi, 1x GNSS)
Gamme de fréquences 5G LTE698~960 MHz / 1710~2690 MHz / 2900~3800 MHz
Gamme de fréquences Wi-Fi2400~2483.5 MHz / 4900~5925 MHz
Gamme de fréquences GNSS1561.098 à 1575.42 MHz
Connecteurs4x SMA Male (5G LTE), 2x RP-SMA Male (Wi-Fi), 1x SMA Male (GNSS)
Longueur du câble3 mètres (10 pieds)
Type de montageMontage à vis (type toit extérieur)
Protection contre les intrusionsIP67 (Résistant à l'eau et à la poussière)
Impédance50 Ohms
Dimensions du produit7.48 po L x 5.91 po l x 5.91 po H (environ 189 mm x 150 mm x 150 mm)
Poids de l'article2.53 livres (1.15 kg)
CouleurNoir
Diagramme des dimensions de l'antenne
Image: Antenna Dimensions. A diagram illustrating the physical dimensions of the antenna, including length, width, height, and cable length.
Schéma d'interface d'antenne
Image: Antenna Interface. A diagram showing the seven cables extending from the antenna, labeled with their respective connector types (4x SMA Male for 5G/4G, 2x RP-SMA Male for WiFi, 1x SMA Male for GNSS).

4. Configuration et installation

The LINOVISION ANT-5GCombo7 antenna is designed for outdoor roof mounting. Follow these steps for secure and effective installation.

4.1 Sélection du site

Outdoor Roof SMA Antenna mounted on a roof
Image: Outdoor Roof SMA Antenna. The antenna is shown mounted on a vehicle roof, highlighting its IP67 waterproof rating and suitability for outdoor environments.

4.2 Étapes de montage

  1. Drill a Hole: Drill a 0.98 inch (25mm) diameter hole at the selected mounting location on the roof. Ensure the hole is clean and free of debris.
  2. Insérer l'antenne : Carefully insert the antenna's threaded base through the drilled hole from the outside.
  3. Fixer avec un écrou : From the inside, thread the securing nut onto the antenna's base and tighten it firmly to secure the antenna to the roof. Ensure a watertight seal.
  4. Connecter les câbles : Connect the 4x SMA Male connectors to the 5G LTE ports on your compatible router, the 2x RP-SMA Male connectors to the Wi-Fi ports, and the 1x SMA Male connector to the GNSS port. Ensure all connections are finger-tight.
Étapes d'installation de l'antenne
Image: Installation Steps. A three-step diagram showing how to drill a hole, insert the antenna, and secure it with a nut for roof mounting.

4.3 Compatible Routers

This antenna is compatible with most 5G LTE cellular routers that feature 2, 3, 4, 5, 6, or 7 antenna interfaces. Specifically, it is designed to work with Teltonika routers such as RUTM50, RUTC50, RUTX50, and TRB500 (equivalent to Teltonika PR1KC640).

5. Mode d'emploi

Once installed and connected to a compatible router, the antenna operates passively to enhance signal reception for 5G LTE, Wi-Fi, and GNSS. No specific configuration is required for the antenna itself.

Antenna Application Scenarios
Image: Application. This image displays various application scenarios for the antenna, including RVs, transportation vehicles (trucks), marine vessels, and construction sites.

6. Entretien

The LINOVISION ANT-5GCombo7 antenna is designed for durability and requires minimal maintenance.

7. Dépannage

Si vous rencontrez des problèmes avec votre antenne, reportez-vous aux étapes de dépannage courantes suivantes :

If issues persist after attempting these steps, please contact LINOVISION customer support.

8. Garantie et assistance

LINOVISION is committed to providing reliable products and excellent customer service.

Documents connexes - ANT-5GCombo7

Préview Manuel d'utilisation du routeur cellulaire industriel LINOVISION IOT-R32W
User manual for the LINOVISION IOT-R32W Industrial Cellular Router, detailing its features, package contents, hardware introduction, LED indications, installation, and network configuration for Ethernet and cellular connections.
Préview Manuel d'utilisation des routeurs vSIM LINOVISION IOT-R51W
Manuel d'utilisation du routeur vSIM LINOVISION IOT-R51W, couvrant l'installation, la connexion au PC, web Accès à la plateforme, paramètres Wi-Fi, cas d'utilisation et dépannage.
Préview Guide rapide du routeur cellulaire industriel Linovision IoT-R32L
Un guide concis pour l'installation et la configuration du routeur cellulaire industriel Linovision IoT-R32L, couvrant le matériel et plus encore.view, installation, connexion et configuration réseau.
Préview Spécifications du routeur cellulaire industriel 4G LTE Linovision IOT-R32W
Spécifications détaillées du routeur cellulaire industriel 4G LTE Linovision IOT-R32W, incluant la connectivité réseau, la prise en charge des protocoles, la conception industrielle, les fonctionnalités de sécurité, les spécifications matérielles et logicielles, et le contenu de l'emballage.
Préview Manuel d'utilisation Linovision IOT-R32W
Manuel d'utilisation du routeur cellulaire industriel Linovision IOT-R32W, couvrant l'installation, la présentation du matériel et les étapes de configuration de base pour la connectivité réseau.
Préview Guide de démarrage rapide du routeur cellulaire industriel Linovision IOT-R32
Ce guide fournit les informations essentielles pour l'installation et la configuration du routeur cellulaire industriel Linovision IOT-R32, y compris la configuration matérielle, la configuration PC et les méthodes de connexion réseau (WAN et cellulaire).