1. Introduction
The RESTMO Water Flow Meter is designed to accurately measure and track water usage and flow rate for various outdoor and indoor applications. This device features an easy-to-read LCD screen and a single push-button control for seamless operation. It is ideal for monitoring water consumption in garden hoses, RV water tank filling, lawn sprinklers, and nozzle sprayers.
Les principales caractéristiques comprennent :
- High Measure Accuracy: Built-in hall type sensor and IC chipset provide precise calculations with a measurement tolerance of less than 5%.
- Plusieurs modes de mesure : Easily switch between Flow, Consumption, Average, and Total modes.
- Conversion d'unité: Switch between US gallons and liters.
- Conception durable et résistante aux intempéries : Constructed with heavy-duty ABS material and IPX6 waterproof rating for outdoor use.
- 360° Rotating Inlet: Ensures easy installation and enhanced durability.
2. Installation
2.1 Installation de la batterie
The water flow meter requires a CR2032 lithium battery. To install or replace the battery:
- Localisez le compartiment à piles à l'arrière de l'appareil.
- Use a coin or the included circle sheet to twist and unlock the battery cover.
- Insérez la pile CR2032 avec le côté positif (+) orienté vers le haut.
- Replace the battery cover and twist to lock it securely, ensuring a waterproof seal.
2.2 Connecting the Water Flow Meter
The RESTMO Water Flow Meter features a 360° rotating inlet and 3/4" NH hose threads, making it compatible with all standard outdoor faucets and garden hoses without requiring additional adapters.
- Ensure the water source is turned off.
- Screw the inlet (top part with the brass connector) of the water flow meter onto your outdoor faucet or the end of your garden hose. Hand-tighten only.
- Connect your garden hose, nozzle, or sprinkler to the outlet (bottom part) of the water flow meter. Hand-tighten only.
- Ensure all connections are secure to prevent leaks. Teflon tape can be used for a tighter seal if necessary.
3. Mode d'emploi
The water flow meter features a single push-button for control and mode switching.
3.1 Mise sous/hors tension
The LCD screen automatically goes to sleep if there is no operation or water flow for 1 minute to conserve battery. It will automatically activate upon water flow or a button press.
3.2 Modes de mesure
Short press the button to cycle through the 4 different measurement modes:
- Mode de flux : Displays the real-time water flow rate (e.g., L/Min or GAL/Min).
- Mode de consommation : Displays the water usage from the last watering session.
- Mode moyen : Displays the daily average water usage over the last 7 days (counts from the next day after initial use).
- Mode total : Displays the total accumulated water consumption since the device was last reset.
3.3 Unit Conversion & Reset
- Conversion d'unité: Pendant que dans Mode de débit, long press the button to switch the unit between US gallons and liters.
- Réinitialiser les données: Pendant que dans Mode de consommation, Mode moyen, ou Mode total, long press the button to reset the displayed data for that specific mode.
3.4 Démonstration vidéo
Vidéo 3.1: Official product video from Restmo demonstrating the features and operation of the Water Flow Meter, including measurement accuracy.
Vidéo 3.2: A seller-provided video demonstrating the use of a water flow meter for RV applications, showing how to measure water input.
4. Entretien
4.1 Cleaning the Filter Washer
The water flow meter includes a metal filter washer at the inlet to prevent dirty, sediment, and other larger particles from entering the device and affecting measurement accuracy. Regularly check and clean this filter to ensure optimal performance.
4.2 Résistance aux intempéries
The device has an IPX6 waterproof grade, ensuring stability for outdoor use and resistance to UV, sunshine, and rain. However, it is recommended to store the device indoors during extreme weather conditions or prolonged periods of non-use to extend its lifespan.
5. Dépannage
- Pas d'affichage : Check if the battery is correctly installed and has sufficient charge. Replace the CR2032 battery if needed.
- Lectures inexactes : Ensure the metal filter washer is clean and free of debris. Verify that all connections are tight and there are no leaks. Ensure water flow is consistent and not excessively turbulent.
- Fuites chez Connections : Hand-tighten all connections. If leaks persist, apply Teflon tape to the threads. Ensure rubber washers are properly seated.
- L'écran ne répond pas : Essayez de retirer puis de réinsérer la batterie pour effectuer une réinitialisation logicielle.
6. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | O-WM-4-BK |
| Dimensions du produit | 1.6 x 1.6 x 3.4 pouces |
| Poids de l'article | 3.87 onces (0.11 kilogrammes) |
| Matériel | Plastique |
| Couleur | Noir |
| Type d'affichage | Écran LCD |
| Piles requises | Oui (CR2032) |
| Indice d'étanchéité | IPX6 |
7. Garantie et assistance
RESTMO is committed to providing reliable and intelligent solutions. Your RESTMO Water Flow Meter comes with a standard warranty, with options to extend it up to 5 years. For detailed warranty information and to register your product, please refer to the product packaging or contact customer support.
For any questions, technical support, or warranty claims, please contact us:
- E-mail: support@restmo-link.com
- Téléphone (États-Unis) : +1 866-876-6888
- Téléphone (international): +1 929-329-4398
- Website: www.restmo.online
- Instructions vidéo: Scan the YouTube QR code on the product packaging or search "RESTMO" on YouTube for set-up instructions.
- Support en ligne: Scan the WhatsApp QR code or send WhatsApp messages for online support.
