1. Introduction
Thank you for choosing the Prunarbo PR-E40 Electric Pruning Shears. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read it thoroughly before first use and keep it for future reference.
The Prunarbo Electric Pruning Shear offers enhanced efficiency and reduced effort compared to traditional manual pruners.
2. Consignes de sécurité
WARNING: Read and understand all safety precautions before operating this tool. Failure to do so may result in serious injury.
- Portez toujours un équipement de protection individuelle (EPI) approprié, notamment des lunettes de sécurité, des gants et des chaussures robustes.
- Keep hands and body parts clear of the blades at all times. The blades are extremely sharp and powerful.
- Assurez-vous que l'outil est éteint et que la batterie est retirée avant toute opération d'entretien, de nettoyage ou lorsqu'il n'est pas utilisé.
- Store the tool and batteries in a dry, secure location, away from children and unauthorized users.
- Sécurité des batteries : Use only genuine Makita 18V batteries (BL1820, BL1830B, BL1840B, BL1850B, BL1860B) or Prunarbo original batteries. Use the original charger that matches your battery model. Charge new batteries for more than five hours before first use. Charge batteries every three months to prolong service life. Do not store batteries in humid environments or near high heat sources.
3. Produit terminéview
The Prunarbo PR-E40 Electric Pruning Shears are designed for efficient and precise cutting in gardening tasks. Key features include:
- Moteur sans brosse: Provides higher efficiency, longer runtime, more power, and increased durability.
- SK5 High-Carbon Steel Blades: Ensures exceptional sharpness, durability, and clean cuts. Features a Teflon coating for smooth, non-stick operation.
- Écran LCD : Shows remaining battery level and cut count for better visibility.
- Diamètre de coupe réglable : Easily switch between 25mm and 40mm cutting diameters.
- Interrupteur de sécurité: Requires a quick double-press of the trigger to activate, preventing accidental operation. The tool enters standby mode after 60 seconds without cutting and auto-turns off after 15 minutes of inactivity.
Prunarbo PR-E40 Electric Pruning Shears with included accessories.
Key features of the Prunarbo PR-E40, highlighting the brushless motor, SK5 blade, and LCD display.
4. Installation
4.1. Installation de la batterie
- Ensure the pruning shears are switched off.
- Align the battery with the battery slot at the base of the shears.
- Insérez fermement la batterie en place jusqu'à entendre un clic, indiquant qu'elle est bien verrouillée.
The Prunarbo PR-E40 is compatible with Makita 18V batteries such as BL1860B, BL1850B, BL1840B, BL1830B, and BL1820B.
4.2. Activation initiale
For safety, the shears require activation before use:
- Press and hold the power switch for a few seconds until the LCD screen illuminates.
- Quickly pull the trigger twice to activate the blades. The blades will open to their maximum setting.
Step-by-step guide for initial setup and activation of the pruning shears.
5. Mode d'emploi
5.1. Effectuer une coupe
Once activated, simply position the open blades around the branch you wish to cut and pull the trigger. The blades will close to make a clean cut and then reopen automatically.
5.2. Adjustable Cutting Diameter
The Prunarbo PR-E40 allows you to adjust the cutting diameter between 25mm and 40mm. Refer to the product's specific instructions for changing this setting, usually involving a combination of trigger presses while the tool is active.
The shears offer an adjustable cutting diameter from 25mm to 40mm for various branch sizes.
5.3. Using with an Extension Pole (Sold Separately)
For pruning high branches, the PR-E40 is compatible with a long telescopic rod (not included). This allows for extended reach without the need for ladders, enhancing safety and convenience.
The shears can be attached to an extension pole for pruning high branches.
5.4. Vidéo opérationnelle
This video demonstrates the power and precision of the Prunarbo E40 Electric Pruning Shears in action.
6. Entretien
Un entretien régulier garantit la longévité et les performances optimales de votre sécateur.
6.1. Blade Lubrication
Apply a few drops of lubricating oil to the blade pivot point and cutting edges regularly, especially after prolonged use or exposure to moisture. This helps maintain smooth operation and prevents rust.
Watch this video for a step-by-step guide on how to properly lubricate the blades of your PR-E40 shears.
6.2. Remplacement de la lame
If the blades become dull or damaged beyond sharpening, they can be replaced. Always use genuine Prunarbo replacement blades. Follow the instructions in the video below carefully.
This video provides detailed instructions on how to safely replace the blade on your Prunarbo PR-E40 electric pruning shears.
6.3. Affûtage des lames
Use the provided sharpening stone to maintain the sharpness of your blades. Sharpening should be done with the battery removed and blades closed for safety.
6.4. Nettoyage
After each use, clean the blades and housing to remove sap, debris, and dirt. Use a damp cloth and mild detergent if necessary. Ensure the tool is completely dry before storage.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Les ciseaux ne s'allument pas | Battery not installed correctly or discharged; Power switch off; Safety activation not performed. | Ensure battery is fully charged and properly inserted. Press power switch. Perform double-trigger press for activation. |
| Les lames ne coupent pas efficacement | Dull blades; Debris obstructing blades; Insufficient lubrication. | Sharpen or replace blades. Clean any debris from the blade area. Lubricate blades as per maintenance section. |
| L'outil s'arrête pendant le fonctionnement | Battery low; Overload protection activated; Auto-standby/off engaged. | Recharge or replace battery. Reduce cutting load. Reactivate the tool if it entered standby/auto-off mode. |
8. Spécifications
- Marque: Prunarbo
- Modèle: PR-E40
- Poids de l'article : 2.2 livres
- Matériau de la lame : Acier à haute teneur en carbone
- Matériau du manche : Plastique, caoutchouc
- Type de lame : By-pass
- Largeur de coupe : 40 Millimeters (Adjustable)
- Source d'alimentation : Battery Powered (Compatible with Makita 18V)
- Dimensions du produit : 13.78 x 3.15 x 0.04 pouces
9. Garantie et assistance
Prunarbo offers a one-year warranty on the power tool machine, battery, and charger. If you encounter any problems or have questions regarding your Prunarbo PR-E40 Electric Pruning Shears, please feel free to contact us. We are committed to providing satisfactory solutions and support.
Pour obtenir de l'aide supplémentaire, veuillez consulter le Prunarbo Store on Amazon.
