1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Browning Trail Cameras Strike Force Pro DCL Nano 26MP Trail Camera. This advanced trail camera features Dual Camera Lens Technology for superior image quality in varying light conditions, infrared illumination for night vision, and 4K video recording capabilities.
Figure 1 : Face avant view of the Browning Strike Force Pro DCL Nano Trail Camera, showcasing its camouflage design and primary camera components.
2. caractéristiques du produit
- Technologie à double objectif : Equipped with two dedicated camera lenses for optimized performance, providing razor-sharp daytime images and clear low-light nighttime images.
- RADIANT 6 Infrared Illumination: Delivers unmatched nighttime performance with a flash range extending up to 130 feet, ensuring clear captures in complete darkness.
- Vitesse de déclenchement rapide : Achieves an ultra-fast 0.15-second trigger speed, minimizing delays and ensuring quick capture of moving subjects.
- Enregistrement vidéo 4K : Records high-quality 4K videos (3840 x 2160 resolution) with sound, providing detailed and immersive footage.
- Longue durée de vie de la batterie : Designed for extended operation, requiring only 6 AA batteries for prolonged field use.
- Résolution d'image 26MP : Captures high-resolution still images for detailed observation.
3. Contenu de la boîte
Upon unboxing your Browning Strike Force Pro DCL Nano Trail Camera, verify that the following items are included:
- Browning Strike Force Pro DCL Nano Trail Camera Unit
- Sangle de montage
Remarque : les piles et la carte SD sont vendues séparément.
4. Installation
4.1 Installation de la batterie
The camera operates on 6 AA batteries. For optimal performance, use high-quality alkaline or lithium batteries. Lithium batteries are recommended for cold weather conditions.
- Open the camera's front cover by unlatching the side clasp.
- Repérez le compartiment à piles sur le côté de l'appareil photo.
- Insérez 6 piles AA en veillant à respecter la polarité (+/-) indiquée à l'intérieur du compartiment.
- Fermez soigneusement le compartiment à piles.
4.2 Installation de la carte SD
A Class 10 or higher SD card (up to 512GB) is required for storing images and videos.
- Caméra ouverte, repérez l'emplacement de la carte SD.
- Insérez la carte SD dans son logement, l'étiquette tournée vers l'avant, jusqu'à ce qu'elle s'enclenche.
- To remove the SD card, press it gently until it springs out, then pull it out.
Figure 2 : Interne view of the camera, showing the display, control buttons, and slots for battery and SD card installation.
4.3 Montage de la caméra
The camera is designed for tree mounting using the included strap or a compatible mounting accessory.
- Choisissez un arbre ou un poteau robuste à la hauteur souhaitée (généralement de 3 à 6 pieds du sol).
- Passez la sangle de fixation dans les fentes situées à l'arrière de l'appareil photo.
- Securely fasten the strap around the tree, ensuring the camera is stable and pointed towards the desired area.
- Ajustez l'angle de la caméra selon vos besoins.
Figure 3 : Côté view illustrating the camera's mounting bracket and strap attachment point.
5. Mode d'emploi
5.1 Mise sous/hors tension
To power on the camera, slide the power switch (located inside the camera, near the screen) to the "ON" position. To power off, slide the switch to "OFF".
5.2 Navigation dans le menu
Use the control buttons (OK, Up, Down, Left, Right, M) located next to the screen to navigate the camera's menu and adjust settings.
- OK: Confirme la sélection.
- M (modes) : Switches between different operating modes (Photo, Video, Time-Lapse).
- Boutons fléchés : Naviguez dans les options du menu.
5.3 Paramètres de base
Access the menu to configure the following settings:
- Mode: Select Photo, Video, or Time-Lapse.
- Résolution photo : Définir la qualité de l'image (ex. : 26 MP).
- Résolution vidéo : Choose video quality (e.g., 4K Ultra HD).
- Délai de détection : Set the time interval between triggers.
- Vitesse de déclenchement : Adjust sensitivity for faster capture (default 0.15s).
- Mode flash: Configure infrared illumination for night captures.
- Date/Heure : Set current date and time for accurate timestamps.
5.4 Récupération des données
To access your captured images and videos:
- Retirez la carte SD de la caméra.
- Insert the SD card into a compatible card reader connected to a computer or smartphone.
- Alternatively, connect the camera directly to a computer using a USB cable (not included). The camera will appear as a removable drive.
6. Entretien
6.1 Nettoyage
Regularly clean the camera lens and infrared LEDs with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals. Ensure the camera housing is free of dirt and debris, especially around seals, to maintain water resistance.
6.2 Remplacement de la batterie
Replace batteries when the low battery indicator appears on the screen or when performance degrades. Always replace all 6 batteries simultaneously with new ones of the same type.
6.3 Gestion de la carte SD
Periodically format your SD card using the camera's menu option to ensure optimal performance and prevent data corruption. Back up important files avant le formatage.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La caméra ne s'allume pas. | Piles mortes ou mal installées. | Check battery polarity. Replace all 6 AA batteries with new ones. |
| Aucune image/vidéo capturée. | SD card full, corrupted, or not inserted correctly; incorrect settings; detection zone issues. | Ensure SD card is inserted correctly and has free space. Format SD card. Check camera mode and detection delay settings. Verify camera is aimed at an active area. |
| Qualité d'image/vidéo médiocre la nuit. | Objects too far from flash range; dirty lens; low batteries. | Ensure subjects are within 130 ft flash range. Clean the lens. Replace batteries. |
| L'appareil photo se déclenche trop souvent ou pas assez. | Sensitivity settings; environmental factors (e.g., swaying branches). | Adjust trigger speed and detection delay settings. Reposition camera to avoid false triggers. |
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Nom du modèle | Strike Force Dual Lens 4k |
| Numéro de modèle de l'article | BTC-5DCLN |
| Résolution d'image | 26 MP |
| Résolution vidéo | 4K (3840 x 2160) |
| Vitesse de déclenchement | 0.15 secondes |
| Portée de détection | Jusqu'à 100 pieds |
| Portée du flash | Up to 130 feet (RADIANT 6 Infrared Illumination) |
| Source d'énergie | 6 piles AA (non incluses) |
| Stockage | Carte SD (jusqu'à 512 Go, non incluse) |
| Connectivité | USB (pour le transfert de données) |
| Dimensions (L x l x H) | 3.25 x 2.5 x 4.25 pouces |
| Poids | 16 onces |
| Type de montage | Monture d'arbre |
| Composants inclus | Camera unit, Mounting strap |
9. Garantie et assistance
Browning Trail Cameras are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Browning Trail Cameras website.
For technical support, troubleshooting assistance, or warranty claims, please contact Browning Trail Cameras Customer Service:
- Téléphone: (888) 618-4496
- Website: www.browningtrailcameras.com
Please have your model number (BTC-5DCLN) and serial number ready when contacting support. The serial number is located on a sticker inside the camera's battery compartment.
