ZIBOO 15B PRO True RMS Digital Multimeter User Manual

1. Consignes de sécurité

Before using the ZIBOO 15B PRO Digital Multimeter, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or personal injury.

1.1 Directives générales de sécurité

• Avant d'effectuer des mesures, assurez-vous toujours que le multimètre est réglé sur la fonction et la plage appropriées.
• N’utilisez pas le multimètre s’il semble endommagé ou si les cordons de test sont abîmés.
• Observe all safety precautions for working with electricity, including wearing appropriate personal protective equipment (PPE).
• Ne jamais dépasser les valeurs d'entrée maximales pour aucune fonction.
• The device is rated CAT III 600V and CAT II 1000V. Adhere to these ratings for safe operation.
• The multimeter features double fuse protection to prevent damage from overload.

2. Produit terminéview

The ZIBOO 15B PRO True RMS Digital Multimeter is a compact and reliable tool designed for a wide range of electrical testing applications. It offers accurate measurements for AC/DC voltage, AC/DC current, resistance, continuity, diode, capacitance, and duty cycle. Its True RMS capability ensures precise readings for non-sinusoidal waveforms.

Figure 1 : Face avant view of the ZIBOO 15B PRO Digital Multimeter, showing the display, rotary dial, and function buttons.

2.1 Principales caractéristiques

• Vrai RMS : Provides accurate measurements for both sinusoidal and non-sinusoidal AC waveforms.
• Affichage de 6000 comptes : Écran haute résolution pour des lectures précises.
• Vol AC/DCtage: Mesure jusqu'à 1000 V.
• Courant alternatif/continu : Measures up to 10A (optional current clamp for up to 600A).
• Resistance, Continuity, Diode, Capacitance, Duty Cycle: Essential functions for comprehensive electrical troubleshooting.
• VFD AC 600V: Variable Frequency Drive measurement capability.
• NCV/LIVE : Vol sans contacttage and Live Wire Detection with Red LED Flash.
• Maintien de données: Freezes the displayed reading for easier recording.
• Rétroéclairage : Bright white backlight for clear visibility in various lighting conditions.
• Protection Casing: extérieur durableasing for enhanced protection.

Figure 2: Visual representation of the various measurement functions available on the multimeter.

2.2 Contenu de la boîte

• ZIBOO 15B PRO Digital Multimeter
• Cordons de test pour multimètre (rouge et noir)
• Protective Caps for Test Leads
• Manuel d'utilisation

Note: AC pliers are an optional accessory and are not included with the standard package.

3. Installation

3.1 Installation de la batterie

1. Assurez-vous que le multimètre est hors tension.
2. Localisez le compartiment à piles à l'arrière de l'appareil.
3. Unscrew the single Phillips #1 screw to open the compartment.
4. Insert three AA 1.5V batteries, observing correct polarity.
5. Replacez le couvercle du compartiment des piles et fixez-le avec la vis.

3.2 Connexion des cordons de test

1. Insérez le fil de test noir dans la prise « COM » (Commun).
2. Pour la plupart des mesures (voltage, resistance, continuity, diode, capacitance, frequency, duty cycle), insert the red test lead into the 'VΩHz' jack.
3. For current measurements up to 10A, insert the red test lead into the '10A' jack.
4. Pour milliampère (mA) ou microampere (µA) measurements, insert the red test lead into the 'µAmA' jack.

Figure 3: The ZIBOO 15B PRO Multimeter with its test leads, showing the connection points.

4. Mode d'emploi

4.1 Mise sous/hors tension et affichage

Turn the rotary dial from 'OFF' to any desired function to power on the multimeter. To power off, turn the dial back to 'OFF'. The device features an automatic power-off function to conserve battery life. Press the DIRIGÉ button to activate or deactivate the display backlight for improved visibility.

4.2 Fonctions de mesure

Rotate the dial to select the desired measurement function. Use the MODE button to toggle between different sub-functions within a dial position (e.g., AC/DC voltage, NCV/LIVE).

1. Voltage Mesure (CA/CC) :
   Set the dial to 'V~' for AC voltage ou 'V=' pour le volume continutage. Connect the test leads in parallel to the circuit or component being measured. The display will show the voltage lecture.
2. Mesure du courant (CA/CC) :
   Set the dial to 'A~' for AC current or 'A=' for DC current. Ensure the red test lead is in the appropriate current jack (10A or µAmA). Connect the multimeter in series with the circuit.
3. Mesure de la résistance (Ω) :
   Set the dial to 'Ω'. Connect the test leads across the component. Ensure the circuit is de-energized before measuring resistance.
4. Test de continuité ():
   Set the dial to 'Ω' and press MODE until the continuity icon appears. A buzzer will sound and a green LED will flash if continuity is detected (low resistance).
5. Test de diodes ():
   Set the dial to 'Ω' and press MODE until the diode icon appears. Connect the test leads across the diode.
6. Mesure de capacité (F) :
   Set the dial to 'F'. Connect the test leads across the capacitor. Ensure the capacitor is discharged before measurement.
7. NCV (Vol sans contacttage) / LIVE (Live Wire Detection):
   Set the dial to 'NCV LIVE'. The multimeter will detect AC voltage without direct contact. 'L' indicates a live wire with voltage, accompanied by a red LED flash and buzzer. 'EF' indicates non-contact detection.

Figure 4: The multimeter's NCV function detecting voltage near an electrical outlet, indicated by 'EF' on the display.

4.3 Fonctions spéciales

• TENIR: Appuyez sur le PRISE Appuyez sur ce bouton pour figer la lecture actuelle affichée. Appuyez de nouveau pour relâcher.
• MIN MAX: Appuyez sur le MIN MAX button to record the minimum and maximum values during a measurement session. Press again to cycle through MIN, MAX, and current readings.
• GAMME: Appuyez sur le GAMME button to switch between auto-ranging and manual ranging.

5. Entretien

5.1 Nettoyage

Essuyez le multimètre casing avec publicitéamp Nettoyer avec un chiffon et un détergent doux. Ne pas utiliser de nettoyants abrasifs ni de solvants. S'assurer que l'appareil est parfaitement sec avant utilisation.

5.2 Remplacement de la batterie

When the battery indicator appears on the display, replace the batteries as described in Section 3.1. Always use three new AA 1.5V batteries.

5.3 Remplacement du fusible

The multimeter is equipped with internal fuses for protection. If a current measurement function stops working, the fuse may need replacement. To access the fuses, open the battery compartment (Section 3.1). The fuses are located inside. Replace with fuses of the correct type and rating (e.g., 10A/1000V and 500mA/1000V).

Figure 5 : Interne view highlighting the double fuse protection for safety and durability.

5.4 Test Lead Care

The test leads come with protective caps. Use these caps to protect the sharp tips when not in use or when measuring in situations where only a short tip is required. This helps prevent damage to the probes and ensures safety.

6. Dépannage

If you encounter issues with your ZIBOO 15B PRO Digital Multimeter, refer to the following common troubleshooting steps:

• Aucun affichage/Affichage faible : Check battery levels and replace if necessary. Ensure the multimeter is powered on.
• Lectures incorrectes : Verify the test leads are correctly inserted into the appropriate jacks for the selected function. Ensure the rotary dial is set to the correct measurement type and range. Check for damaged test leads.
• Current Function Not Working: The internal fuse for current measurement may have blown due to an overload. Replace the fuse as described in Section 5.3.
• Continuity Buzzer Not Sounding: Ensure the multimeter is in continuity mode. Check for open circuits or high resistance.

For persistent issues, consult the manufacturer's support resources.

7. Spécifications

Note: Accuracy specifications are typical values and may vary slightly.

Figure 6: A detailed table outlining the technical specifications for the ZIBOO 15B PRO multimeter.

8. Garantie et assistance

For warranty information and customer support, please refer to the official ZIBOO website or contact the seller directly through the platform where the product was purchased. Standard return policies typically apply (e.g., 30-day return window).