MiBOXER PUSH2-3 2.4GHz Wireless Dimming Remote User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the MiBOXER PUSH2-3 2.4GHz Wireless Dimming Remote. Please read this manual thoroughly before using the product to ensure proper function and safety.

1.1 Produit terminéview

The MiBOXER PUSH2-3 is a 2.4GHz wireless dimming remote designed for controlling compatible LED lighting systems. It offers 3-zone independent dimming control, allowing users to adjust brightness levels across three distinct lighting areas. The remote operates wirelessly, providing flexible placement and ease of use.

1.2 Contenu du paquet

• MiBOXER PUSH2-3 Wireless Dimming Remote
• Manuel d'utilisation
• Wiring terminals (pre-attached)

Figure 1 : Package contents including the MiBOXER PUSH2-3 remote, its box, and the instruction manual.

Figure 2 : The MiBOXER PUSH2-3 remote with its pre-attached wires and terminals, shown alongside its packaging.

2. Consignes de sécurité

Veuillez respecter les consignes de sécurité suivantes afin d'éviter toute blessure ou tout dommage au produit :

• N'exposez pas l'appareil à l'humidité ou à des températures extrêmes.
• Assurez-vous que toute alimentation électrique est coupée avant l'installation ou le câblage.
• Cet appareil est destiné à être utilisé en intérieur uniquement.
• N'essayez pas de démonter ou de modifier l'appareil.
• Tenir hors de portée des enfants.

3. caractéristiques du produit

• 3-Zone Dimming Control: Independently manage brightness for up to three distinct lighting zones.
• Technologie sans fil 2.4 GHz : Provides reliable and interference-free communication with compatible LED systems.
• Large compatibilité: Works with RGB, CCT, and single-color LED systems.
• Conception ergonomique : Features an easy-to-use layout for quick brightness adjustments.
• Exigences relatives à la batterie : Nécessite une pile CR2032 (non incluse).
• Entretien minimal : Designed for simple operation and long-lasting performance.

4. Spécifications

Figure 3 : Dimensions of the MiBOXER PUSH2-3 remote, showing height (39mm), width (31mm), and depth (11mm).

Figure 4 : Packaging dimensions for the MiBOXER PUSH2-3, indicating a box size of 90mm height, 65mm width, and 21mm depth.

5. Installation

5.1 Installation de la batterie

1. Localisez le compartiment des piles au dos de la télécommande.
2. Ouvrez le couvercle du compartiment.
3. Insérez une pile CR2032 en veillant à respecter la polarité (+/-).
4. Fermez soigneusement le couvercle du compartiment à piles.

5.2 Câblage et connexion

The PUSH2-3 remote requires connection to a PUSH switch (sold separately) to control compatible MiBOXER 2.4G series light lamps and controls. The remote provides three output zones (Z1, Z2, Z3) and a common ground (GND).

Figure 5 : Connection diagram illustrating how to connect the PUSH2-3 remote to a PUSH switch and compatible MiBOXER 2.4G series lights. The remote connects to the PUSH switch via GND, Z1, Z2, and Z3 terminals. A CR2032 battery is required for the remote. The control distance is up to 30 meters.

1. Ensure all power to the lighting system is turned off at the circuit breaker before proceeding.
2. Connect the GND wire from the PUSH2-3 remote to the common ground terminal of your PUSH switch.
3. Connect the Z1, Z2, and Z3 wires from the PUSH2-3 remote to the corresponding zone input terminals on your PUSH switch.
4. Refer to the PUSH switch manual for specific wiring instructions for connecting to your MiBOXER 2.4G series light lamps and controls.
5. Once all connections are secure, restore power to the lighting system.

Figure 6 : The MiBOXER PUSH2-3 remote with its cover removed, showing the internal wiring connections and the battery compartment.

6. Mode d'emploi

The MiBOXER PUSH2-3 remote works in conjunction with a PUSH switch to control compatible MiBOXER 2.4G series lights.

6.1 Appairage de la télécommande

To pair the PUSH2-3 remote with your MiBOXER 2.4G series lights, follow the pairing instructions provided with your specific MiBOXER light fixture or controller. Typically, this involves:

1. Powering on the light fixture.
2. Within a few seconds, pressing the desired zone button on the PUSH switch (which is connected to the PUSH2-3 remote) multiple times.
3. The light fixture will flash to confirm successful pairing.

6.2 3-Zone Dimming Control

Once paired, you can control the brightness of your lights using the PUSH switch connected to the PUSH2-3 remote. Each zone (Z1, Z2, Z3) corresponds to a specific group of lights or a single light fixture, depending on your setup.

• Sélection de zones : Use the corresponding buttons on your PUSH switch to select the desired lighting zone (Z1, Z2, or Z3).
• Atténuation: Press and hold the selected zone button to gradually adjust the brightness. Release the button when the desired brightness level is reached.
• Marche/Arrêt : A short press of a zone button will typically toggle the lights in that zone on or off.

Note: Specific button functions and dimming behavior may vary slightly depending on the PUSH switch model and the connected MiBOXER light fixture. Refer to their respective manuals for detailed operation.

7. Entretien

• Nettoyage: Essuyez la télécommande avec un chiffon doux et sec. N’utilisez pas de nettoyants abrasifs ni de solvants.
• Remplacement de la batterie : Replace the CR2032 battery when the remote's performance degrades or it stops responding. Ensure proper disposal of used batteries according to local regulations.
• Stockage: If storing the remote for an extended period, remove the battery to prevent leakage.

8. Dépannage

9. Garantie et assistance

This product is manufactured by Miboxer. For warranty information and technical support, please refer to the official MiBOXER webConsultez le site ou contactez votre détaillant. Conservez votre reçu d'achat comme preuve d'achat.

Manufacturer: Miboxer

Date de première disponibilité : 5 novembre 2024