Displays2go DF043TLB2

Manuel d'utilisation de la borne publicitaire multimédia Displays2go (DF043TLB2)

Model: DF043TLB2 | Brand: Displays2go

1. Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Displays2go Advertising Multimedia Kiosk, model DF043TLB2. This 43-inch multi-touch kiosk is designed for displaying interactive digital content in various public and commercial environments. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Consignes de sécurité

3. Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

4. Instructions de configuration

4.1. Déballage et placement

Carefully remove the kiosk from its packaging. Place the unit on a flat, stable surface. Ensure adequate space around the kiosk for ventilation and access.

Displays2go Advertising Multimedia Kiosk, front view

Figure 1 : Face avant view of the Displays2go Advertising Multimedia Kiosk.

Displays2go Advertising Multimedia Kiosk, side view with content

Figure 2 : Côté view of the kiosk displaying content.

Displays2go Advertising Multimedia Kiosk, rear view

Figure 3 : Arrière view of the kiosk, showing ventilation and access panel.

Vidéo 1 : Une vue à 360 degrés view of the 43-inch Floor Standing Poster, showcasing its physical design and features from all angles.

4.2. Caster Installation (if not pre-installed)

If the four locking casters are not pre-installed, carefully tilt the kiosk and attach each caster to the designated mounting points on the base. Ensure they are securely fastened. Lock the casters once the kiosk is in its final position to prevent unintended movement.

4.3. Connexion électrique

  1. Locate the power input port on the back of the kiosk.
  2. Connect the provided power cable to the kiosk and then to a standard electrical outlet.
  3. Flip the power switch to the "ON" position. The kiosk will begin to boot up.
Close-up of the kiosk's rear ports including USB, LAN, HDMI, and power switch

Figure 4 : Détaillé view of the kiosk's connectivity ports and power switch.

5. Mode d'emploi

5.1. Initial Boot-Up and Android 11 OS

Upon powering on, the kiosk will boot into the Android 11 operating system. The initial setup may require you to configure basic settings such as language, Wi-Fi connection, and time zone. Follow the on-screen prompts.

Video 2: Product Showcase of the Displays2go Digital Poster, highlighting various features and applications. This video provides a general overview of the kiosk's capabilities, including its touch functionality and design.

5.2. Using the Multi-Touch Screen

The kiosk features a 10-point IR touchscreen, allowing for interactive gestures such as tapping, swiping, and multi-finger operations. Navigate the Android interface and interactive applications by touching the screen directly.

User interacting with the multi-touch screen of the kiosk

Figure 5: A user interacting with the multi-touch screen of the kiosk.

5.3. Content Upload and Management

There are several methods to upload and manage content on your kiosk:

5.4. Using the DiViEX Slideshow App

The kiosk comes with the DiViEX slideshow app pre-installed. This application allows you to create and manage captivating slideshows with various borders, aspect ratios, and theme sharing capabilities. Refer to the in-app help or the DiViEX documentation for detailed usage instructions.

Video 3: Demonstration of the DiViEX Slideshow App. This video illustrates how to use the pre-installed application to create and customize digital content for display on the kiosk.

5.5. Sortie audio

The kiosk is equipped with dual 8W speakers for audio output. Adjust the volume through the Android operating system settings or within the media playback application.

6. Entretien

6.1. Cleaning the Screen and Casing

6.2. Mises à jour logicielles

Periodically check for system updates through the Android settings menu to ensure optimal performance and security. Ensure the kiosk is connected to the internet during updates.

7. Dépannage

ProblèmeCause possibleSolution
Kiosk does not power on.Power cable disconnected; power switch off; no power from outlet.Check power cable connection; ensure power switch is ON; test outlet with another device.
L'écran tactile ne répond plus.Software glitch; screen dirty; external interference.Restart the kiosk; clean the screen; ensure no objects are blocking the IR sensors.
No content displayed.No media loaded; incorrect app selected; network issue for streaming content.Vérifier les médias files are present; ensure the correct application (e.g., DiViEX) is running; check network connection.
Pas de son.Volume too low; audio muted; application audio settings.Increase volume in Android settings; unmute audio; check audio settings within the playing application.

8. Spécifications

FonctionnalitéDétail
ModèleDF043TLB2
Taille de l'écran43 pouces
Résolution1920 x 1080 (HD 1080p)
Touch Technology10pt IR Touchscreen
Système opérateurAndroid 11
Stockage interne32 Go
BÉLIER4 Go
Ports USB3
IntervenantsDouble 8 W
Rapport hauteur/largeur1.78:1
Rapport de contraste d'image1200:1
Dimensions du produit (L x H x P)24.4 x 56 x 9 pouces
FabricantAffiche2go

9. Garantie et assistance

For warranty information and technical support, please refer to the Displays2go official webConsultez leur site web ou contactez leur service client. Conservez votre reçu d'achat pour toute réclamation au titre de la garantie.

Displays2go Contact Information:

Documents connexes - DF043TLB2

Préview Manuel d'utilisation de la borne tactile PCAP 49 pouces - Displays2go
Manuel d'utilisation de la borne tactile PCAP Displays2go 49 pouces (modèles DK049CLB, DK049CLW). Ce guide fournit des instructions complètes sur l'installation, le fonctionnement, les précautions de sécurité, les spécifications techniques et le dépannage de votre solution d'affichage numérique.
Préview Borne tactile PCAP 21.5" - Manuel d'utilisation Android 11 | Displays2go
Manuel d'utilisation de la borne tactile PCAP Displays2go 21.5" fonctionnant sous Android 11. Ce manuel inclut les informations relatives à l'installation, au fonctionnement, au dépannage, aux spécifications techniques et à la sécurité.
Préview Borne tactile PCAP 49" 10 pt - Manuel d'utilisation Android 11
Manuel d'utilisation de la borne tactile PCAP 10 points Displays2go de 49 pouces fonctionnant sous Android 11. Ce manuel fournit des informations sur l'installation, le fonctionnement, la gestion des supports, les spécifications techniques, le dépannage et les consignes de sécurité.
Préview Manuel d'utilisation du panneau d'affichage numérique sur pied Displays2go de 55 pouces
Manuel d'utilisation complet pour l'affichage numérique sur pied Displays2go de 55 pouces (modèles DF055NLB2, DF055TLB2, DF055TLW2), couvrant les précautions de sécurité, l'installation, le fonctionnement, l'application DiViEX, les spécifications techniques, le dépannage et la conformité FCC.
Préview 43-Inch Outdoor 20pt PCAP Touch Kiosk - Android 11 OS User Manual
User manual for the Displays2go 43-inch Outdoor 20pt PCAP Touch Kiosk with Android 11 OS. Covers safety, operation, settings, DiViEX app, technical specifications, troubleshooting, and FCC compliance.
Préview User Manual: Displays2go 55" Indoor Floor Standing Digital Signage (Model DGFSNT55)
Comprehensive user manual for the Displays2go 55-inch Indoor Floor Standing Digital Signage (Model DGFSNT55), covering features, safety, assembly, operation, remote control, file gestion, dépannage et spécifications techniques.