Manuel d'utilisation de la caméra étanche 4K AgfaPhoto Realimove CC4000W

1. Introduction

This manual provides detailed instructions for the safe and effective use of your AgfaPhoto Realimove CC4000W 4K Waterproof Camcorder. Please read this manual thoroughly before operating the device to ensure optimal performance and to prevent damage.

The AgfaPhoto Realimove CC4000W is a versatile camcorder designed to capture high-quality video and photos in various environments, including underwater. It features 4K Ultra High Definition video recording, 24MP photo capabilities, an 18x digital zoom, and a 3-inch articulated LCD touch screen. Its waterproof design allows for use up to 5 meters (16 feet) deep.

2. Contenu de la boîte

Veuillez vérifier que tous les éléments suivants sont inclus dans votre colis :

• AgfaPhoto Realimove CC4000W Camcorder
• Batterie au lithium
• Câble USB
• Sac pour caméscope
• Manuel de l'utilisateur (ce document)

3. Produit terminéview

Familiarisez-vous avec les principaux composants et commandes de votre caméscope.

Figure 3.1 : Face avant view of the AgfaPhoto Realimove CC4000W camcorder, highlighting the lens and main body.

Figure 3.2 : The camcorder with its 3-inch articulated LCD screen open, showing control buttons on the side.

Figure 3.3 : Gros plan view of the camcorder's lens, indicating 4K Ultra HD, 24MP photo capability, and 5m/16ft waterproof rating.

Figure 3.4 : The camcorder being used in an underwater setting, demonstrating its waterproof capability.

4. Installation

4.1. Installation de la batterie

1. Open the battery compartment cover, typically located on the bottom or side of the camcorder. Ensure the cover is unlocked if it has a locking mechanism.
2. Insert the provided Lithium battery, aligning it according to the polarity indicators (+/-) inside the compartment.
3. Close the battery compartment cover securely until it clicks into place. For waterproof performance, ensure the cover is fully sealed and locked.

4.2. Chargement de la batterie

1. Connect the camcorder to a power source using the supplied USB cable.
2. The charging indicator light will illuminate. Charging typically takes several hours.
3. Once fully charged, the indicator light may change color or turn off. Disconnect the USB cable.

4.3. Insertion d'une carte mémoire (non fournie)

The camcorder requires a compatible SD card (not included) to store videos and photos. Ensure the card is formatted before first use.

1. Locate the memory card slot, usually near the battery compartment or under a protective flap.
2. Insert the SD card with the metal contacts facing the correct direction, gently pushing until it clicks into place.
3. Close the protective flap securely.

5. Mode d'emploi

5.1. Mise sous/hors tension

• Pour allumer : Ouvrez l'écran LCD ou appuyez sur le bouton Marche/Arrêt.
• Pour éteindre : Close the LCD screen or press and hold the Power button for a few seconds.

5.2. Selecting Recording Modes

Press the 'MODE' button to switch between Video Recording Mode and Photo Capture Mode. The current mode will be displayed on the LCD screen.

5.3. Enregistrement vidéo

1. Ensure the camcorder is in Video Recording Mode.
2. Frame your shot using the 3-inch articulated LCD screen.
3. Press the 'RECORD' button (usually marked with a red dot) to start recording. A red indicator or timer will appear on the screen.
4. Appuyez de nouveau sur le bouton « ENREGISTRER » pour arrêter l’enregistrement.

5.4. Prendre des photos

1. Ensure the camcorder is in Photo Capture Mode.
2. Cadrez votre photo à l'aide de l'écran LCD.
3. Press the 'PHOTO' button (often marked with a camera icon) to capture an image.

5.5. Utilisation du zoom numérique

Use the 'W' (Wide) and 'T' (Telephoto) buttons, typically located near the top or side of the camcorder, to adjust the 18x digital zoom. Press 'T' to zoom in and 'W' to zoom out.

5.6. Fonctionnement étanche

Important: Before using the camcorder underwater, ensure all covers (battery, memory card, USB/HDMI ports) are securely closed and locked. Failure to do so will result in water damage and void the warranty.

• The camcorder is waterproof up to 5 meters (16 feet). Do not exceed this depth.
• After underwater use, rinse the camcorder with fresh water and dry thoroughly with a soft cloth before opening any compartments.

5.7. Connexion à un ordinateur

Use the supplied USB cable to connect the camcorder to your computer. The camcorder will appear as a removable disk, allowing you to transfer your video and photo files.

6. Entretien

6.1. Nettoyage du caméscope

• Utilisez un chiffon doux et sec pour nettoyer le boîtier du caméscope.
• For the lens and LCD screen, use a specialized lens cleaning cloth and solution to avoid scratches.
• N'utilisez pas de produits chimiques agressifs ou de matériaux abrasifs.

6.2. Entretien du joint d'étanchéité

• Regularly inspect the rubber seals around the battery, memory card, and port covers for any dirt, sand, or damage.
• Clean seals gently with a soft, damp En tissu. Ne pas utiliser d'objets pointus.
• Ensure seals are free of debris before closing covers for waterproof use.

6.3. Entretien de la batterie

• Rangez la batterie dans un endroit frais et sec lorsqu'elle n'est pas utilisée.
• Évitez de décharger complètement la batterie fréquemment afin de prolonger sa durée de vie.
• En cas de stockage prolongé, chargez la batterie à environ 50 % de sa capacité.

7. Dépannage

8. Spécifications

9. Garantie et assistance

AgfaPhoto products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official AgfaPhoto webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.