STRICH SMT-40 Multi-Guitar Stand Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your STRICH SMT-40 Multi-Guitar Stand. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of the product. Keep this manual for future reference.

The STRICH SMT-40 is designed to securely hold multiple guitars, including acoustic, electric, and bass models, while also providing storage for accessories like effects pedals and amplifiers. Its robust construction and thoughtful design aim to optimize space and protect your instruments.

2. Consignes de sécurité

• Ensure all screws and connections are tightened securely before placing instruments on the stand.
• Do not overload the stand beyond its intended capacity.
• Placez le support sur une surface plane et stable pour éviter qu'il ne bascule.
• Gardez les petites pièces hors de portée des enfants pendant l'assemblage.
• Avoid exposing the stand to extreme temperatures or moisture.

3. Contenu du colis

Vérifiez que tous les composants sont présents avant de commencer l'assemblage :

• Main metal frame components
• Wooden top shelf
• Wooden bottom shelf
• Adjustable metal effects pedal shelf
• Instrument cushion rods (with rubber foam padding)
• Side brackets for guitar neck support
• Coussinets antidérapants pour les pieds
• Assembly hardware (screws, nuts, Allen wrench)
• Velcro strips (for pedal attachment)
• Crochets pour accessoires

4. Configuration et assemblage

Follow these steps carefully to assemble your STRICH SMT-40 Multi-Guitar Stand. An installation video is provided below for visual guidance.

4.1. Assemble the Middle Cabinet

1. Install the Bottom Layer: Attach the bottom wooden board to the lowest position of the middle cabinet's vertical frames using the provided screws. Ensure the holes align correctly.
2. Install Upper Brackets: Connect the upper vertical frames of the middle cabinet. Ensure that the indicated hole positions for the crossbars are on the same side.
3. Install Middle Crossbars: Insert and secure the middle crossbars into the designated holes on the vertical frames. Tighten with screws.
4. Install Effects Pedal Shelf: Place the metal effects pedal board stand into the middle section. It can be positioned flat or angled at 45 degrees for pedal access.
5. Install Top Wooden Board: Secure the top wooden board to the uppermost part of the middle cabinet using screws.

4.2. Assemble Side Brackets

1. Connect Side Frame Components: Assemble the individual pieces of the side guitar holding frames.
2. Attach to Middle Cabinet: Align the assembled side brackets with the central cabinet. Secure them to the wooden boards and metal frames using the appropriate screws.
3. Install Instrument Cushion Rods: Insert the rubber-padded instrument cushion rods into the designated holes on the side frames. These rods protect your guitar's neck and body.

4.3. Touches finales

1. Installer les patins de protection : Attach all non-slip foot pads to the bottom of the stand's legs. These protect your floor and enhance stability.
2. Attach Accessory Hooks: If desired, attach the provided S-hooks to the side frames for hanging guitar straps or cables.
3. Vérifier la stabilité : Gently shake the assembled stand to ensure all connections are secure and the stand is stable.

Image 1: The fully assembled STRICH SMT-40 Multi-Guitar Stand, ready for use.

5. Mode d'emploi

The STRICH SMT-40 Multi-Guitar Stand offers versatile storage and display options for your musical equipment.

5.1. Placing Guitars

The stand is designed to hold up to six guitars. Carefully place your acoustic, electric, or bass guitars into the designated slots. The rubber foam padding on the support rods protects your instruments from scratches.

Image 2: The stand accommodating a variety of instruments, including acoustic, electric, and bass guitars, as well as a mandolin and banjo.

5.2. Adjustable Effects Pedal Shelf

The middle metal shelf can be adjusted to two positions:

• Position à plat : Ideal for placing small speakers, tuners, or other accessories.
• Angled Position: Perfect for organizing and accessing effects pedals. Use the included Velcro strips to secure your pedals to the shelf.

Image 3: Demonstrates the two possible configurations for the effects pedal shelf: flat for general storage and angled for pedal organization.

5.3. Wall-Hugging Design

The stand features a forward-positioned neck support bar, allowing the entire rack to sit flush against a wall. This design ensures that guitar headstocks do not touch the wall, saving space and protecting both your instruments and walls.

Image 4: Un détail view highlighting the wall-hugging design, which allows the stand to be placed close to a wall without guitars touching it.

5.4. Rangement polyvalent

The top and bottom wooden shelves provide additional space for amplifiers, tuners, microphones, cables, and other musical accessories. The removable neck supports on the side frames can be adjusted to create extra space for larger items like guitar cases.

Image 5: Illustrates how the stand can accommodate a guitar case by adjusting or removing specific support levers, providing flexible storage.

6. Entretien

• Nettoyage: Essuyez le support avec un chiffon doux et sec pour enlever la poussière. Pour les taches tenaces, utilisez un chiffon légèrement plus épais.amp cloth and mild soap, then dry immediately. Avoid abrasive cleaners.
• Vérification du matériel : Periodically inspect all screws and connections to ensure they remain tight. Re-tighten as necessary to maintain stability.
• Inspection du rembourrage : Check the rubber foam padding on the instrument supports for any signs of wear or damage. Replace if necessary to continue protecting your instruments.

7. Dépannage

• Le support est instable : Ensure the stand is on a level surface. Double-check that all assembly screws are fully tightened. Adjust the non-slip foot pads if the floor is uneven.
• Guitars are Not Fitting Properly: Verify that the instrument cushion rods are correctly installed. For larger items like guitar cases, ensure the removable neck supports are adjusted or removed as needed.
• Parties manquantes: Si des pièces sont manquantes à la réception du colis, veuillez contacter immédiatement le service client.

8. Spécifications

9. Garantie et assistance

For warranty information or technical support, please refer to the product packaging or contact STRICH customer service through the retailer where the product was purchased. Please have your model number (SMT-40) and purchase date available when contacting support.