Introduction
The Pro-Ject T1 Evo Phono Turntable is designed to deliver high-fidelity audio for vinyl enthusiasts. This model features a built-in phono pre-amplifier, allowing for direct connection to various audio systems. It comes equipped with an Ortofon OM 10 moving magnet cartridge, pre-aligned for optimal performance. The turntable's plinth is CNC-machined, avoiding plastic components to minimize resonant hollow spaces, ensuring pure sound reproduction. An elegant dust cover with adjustable hinges and a low-capacitance Connect it Phono E RCA cable are included for convenience and quality.
Guide d'installation
1. Déballage et placement
Retirez soigneusement tous les composants de l'emballage. Placez la platine sur une surface stable et plane, à l'abri de la lumière directe du soleil, des sources de chaleur et des vibrations excessives. Assurez une ventilation adéquate autour de l'appareil.
Figure 1: Pro-Ject T1 Evo Phono Turntable with dust cover open.
Figure 2: Pro-Ject T1 Evo Phono Turntable with dust cover closed, protecting the components.
2. Assemblage
- Placez le plateau sur la broche.
- Carefully place the felt mat on top of the platter.
- Attach the dust cover by aligning its hinges with the slots on the turntable's base.
3. Connexions
Connect the included RCA cable from the turntable's output to an available input on your amplifier or powered speakers. Since this model has a built-in phono pre-amplifier, you can connect it directly to a line-level input (e.g., AUX, CD, Line In). Ensure the ground wire is connected from the turntable to your ampBorne de terre de l'amplificateur pour minimiser le ronflement.
Figure 3: Rear connections for RCA output and ground wire.
Branchez l'adaptateur secteur à la platine vinyle, puis à une prise murale.
Mode d'emploi
1. Marche/Arrêt
Locate the power switch on the side of the turntable. Flip the switch to the 'On' position to power on the unit. The platter will begin to rotate. Flip to 'Off' to power down.
Figure 4: Power switch location.
2. Lecture d'un disque
- Ensure the dust cover is open or removed.
- Place your vinyl record onto the felt mat on the platter.
- Retirez délicatement le protecteur de stylet de la cartouche.
- Soulevez le bras de lecture à l'aide du levier de levage du bras de lecture.
- Déplacez délicatement le bras de lecture au-dessus du sillon de départ souhaité du disque.
- Lower the tonearm using the tonearm lift lever. The stylus will gently descend onto the record, and playback will begin.
- To stop playback, lift the tonearm using the lever and return it to its rest.
Figure 5: Tonearm and Ortofon OM 10 cartridge.
Figure 6: Ortofon OM 10 cartridge detail.
3. Connectivité Bluetooth
The T1 Evo Phono Turntable supports Bluetooth connectivity for wireless audio streaming to compatible Bluetooth speakers or headphones. Refer to your Bluetooth device's manual for pairing instructions. The turntable will automatically attempt to connect to previously paired devices when powered on.
Entretien
1. Nettoyage du plateau tournant
- Wipe the plinth and dust cover with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- For the acrylic dust cover, use a specialized acrylic cleaner to prevent scratches.
2. Entretien du stylet
- Inspectez régulièrement le stylet pour vérifier l'absence de poussière et de débris.
- Use a soft stylus brush, brushing gently from back to front, to remove any accumulated particles.
- Replace the stylus when sound quality degrades or after approximately 1,000 hours of playback.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Aucun son ou son très faible | Sélection d'entrée incorrecte sur amplifier; loose cables; volume too low. | Assurer amplifier input matches turntable connection (e.g., Line In); check all cable connections; increase volume. |
| Bourdonnement | Fil de terre non connecté ; interférences provenant d'autres appareils électroniques. | Connect the ground wire securely; move turntable away from other electronic devices. |
| Son saccadé ou déformé | Dirty or worn stylus; record is dirty or damaged; turntable not level. | Clean the stylus; clean the record; ensure turntable is on a level surface; replace stylus if worn. |
| Le plateau ne tourne pas. | Power not connected; power switch off. | Check power connection; ensure power switch is in the 'On' position. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Dimensions du produit | 13.19 x 16.34 x 3.94 pouces |
| Poids de l'article | 14.92 livres |
| ASIN | B0DHTXH32G |
| Numéro de modèle de l'article | T1 Evo avec pré-amp |
| Fabricant | Projet |
| Marque | Projet |
| Technologie de connectivité | Câblé |
| Vitesse de rotation maximale | 45 tr/min |
| Dossier spécial | Vitesse réglable |
| Style | Pré-intégréamp |
| Couleur | Blanc satiné |
| Nom du modèle | T1 Evo avec pré-amp |
| Signal-to-Noise Ratio | 70 dB |
| Date de première disponibilité | 24 septembre 2024 |
Garantie et assistance
Informations sur la garantie
This Pro-Ject T1 Evo Phono Turntable comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.
Assistance clientèle
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Pro-Ject customer support. Visit the official Pro-Ject website pour les coordonnées et les ressources supplémentaires.
Note: Always ensure to use genuine Pro-Ject replacement parts and accessories to maintain product performance and warranty validity.
