darkFlash DS900

Manuel d'utilisation du boîtier PC ATX darkFlash DS900

Modèle : DS900

1. Introduction

Thank you for choosing the darkFlash DS900 ATX Full View Dual Tempered Glass PC Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new PC case, including the integrated PWM ARGB fans. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.

darkFlash DS900 PC Case with internal components and fans illuminated

Figure 1.1: The darkFlash DS900 ATX PC Case, showcasing its full view tempered glass panels and pre-installed ARGB fans.

2. caractéristiques du produit

  • Optimum Performance and Cooling: Equipped with four PWM ARGB fans, supporting up to 10 fans and a 360MM radiator for efficient cooling. Includes additional G24 PWM magnetic fans for enhanced heat dissipation.
  • Sans obstruction View: Features a 270° panoramic tempered glass panel for an expansive view of internal hardware and RGB lighting. High-strength tempered glass ensures clarity and durability.
  • Thoughtful Design for Performance: Includes a magnetic top dust filter and a panel filter for component cleanliness. Anti-slip bottom prevents sliding. G24 hydro-bearing fans maintain low noise levels (33.5 dBA) and offer extended lifespan.
  • Gestion des câbles améliorée : Tool-less design features and ample space for expansion simplify upgrades and maintenance. Magnetic fan mounting system allows for quick installation.
  • Esthétique personnalisable : G24 PC Fans feature ARGB lighting compatible with most addressable RGB motherboards (e.g., Aura Mystic Light, Polychrome Sync) for synchronized visual effects.
Explosé view of darkFlash DS900 PC case showing removable panels

Figure 2.1 : Vue éclatée view illustrating the upgraded design with high light transmittance, explosion-proof glass, and screwless disassembly on three sides.

darkFlash ARGB fans showing compatibility with various RGB synchronization technologies

Figure 2.2: The ARGB fans offer all-inclusive compatibility for light color synchronization with major motherboard RGB systems.

3. Configuration et installation

3.1 Compatibilité des composants

The DS900 case supports a wide range of components. Please refer to the diagram below for maximum component dimensions and fan/radiator placements.

Diagram showing component compatibility and fan/radiator support within the darkFlash DS900 case

Figure 3.1: Internal layout indicating support for 360mm radiators, CPU coolers up to 170mm, GPUs up to 425mm, and various storage drives (2.5" SSD, 3.5" HDD).

3.2 Fan Installation and Airflow

The case comes with four 120mm ARGB fans pre-installed. Additional fans can be added for optimized airflow. The magnetic fan mounting system simplifies installation.

Diagram showing included 120mm ARGB fans and their typical placement within the darkFlash DS900 case

Figure 3.2: Illustration of the included 4 x 120mm ARGB fans, with 3 fans typically mounted on the side and 1 fan in the rear. Note: RGB Hub Controller is not included.

Diagram showing high-airflow performance with 4 airflow channels in the darkFlash DS900 case

Figure 3.3: High-airflow performance is achieved through 4 dedicated airflow channels, supporting efficient cooling and radiator integration.

The newly designed magnetic suction fans feature magnets and metal contacts on the side, reducing the need for extensive wire connections and simplifying fan installation and cable management.

Close-up of darkFlash magnetic suction fans showing side contacts for reduced wire connections

Figure 3.4: Magnetic suction fans designed to reduce wire connections, featuring magnets and metal contacts for streamlined setup.

4. Mode d'emploi

4.1 Synchronisation de l'éclairage ARGB

The G24 PC Fans support ARGB lighting synchronization with compatible motherboards. Connect the ARGB cables from the fans to your motherboard's 3-pin 5V ARGB header. Use your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, ASRock Polychrome Sync) to customize lighting effects and colors.

4.2 Contrôle de la vitesse du ventilateur (PWM)

The PWM (Pulse Width Modulation) fans allow for dynamic speed control based on system temperature. Connect the fan PWM cables to your motherboard's 4-pin fan headers. Fan speed can be managed through your motherboard's BIOS settings or dedicated fan control software.

5. Entretien

Regular maintenance ensures the longevity and optimal performance of your PC case and components.

  • Nettoyage du filtre à poussière : The DS900 features a magnetic top dust filter and other panel filters. Periodically remove and clean these filters to prevent dust buildup inside the case, which can impede airflow and component cooling. Use compressed air or a soft brush.
  • Nettoyage du boîtier : Wipe down the exterior and tempered glass panels with a soft, lint-free cloth. For stubborn smudges on glass, a mild glass cleaner can be used, applied to the cloth first, not directly to the glass.
  • Nettoyage du ventilateur : Gently clean fan blades with compressed air or a soft brush to remove dust. Ensure fans are not spinning during cleaning.

6. Dépannage

Cette section aborde les problèmes courants que vous pourriez rencontrer.

ProblèmeCause possibleSolution
Fans not spinning or no RGB lighting.
  • Incorrect fan/RGB cable connection.
  • No power to fan hub/controller (if used).
  • Motherboard RGB header not enabled or software issue.
  • Verify all fan PWM and ARGB cables are securely connected to the motherboard or fan controller.
  • Ensure the fan hub/controller is receiving power from the PSU.
  • Check motherboard BIOS settings for fan control and RGB header activation. Reinstall or update motherboard RGB software.
Accumulation excessive de poussière à l'intérieur du boîtier.
  • Dust filters are dirty or missing.
  • Negative air pressure setup without sufficient filtered intake.
  • Regularly clean all dust filters.
  • Ensure proper airflow configuration with more filtered intake fans than exhaust fans, or balanced pressure.
Températures élevées du système.
  • Débit d'air insuffisant.
  • Fans not spinning at optimal speeds.
  • Dust buildup on components/radiators.
  • Review fan placement and direction for optimal airflow (Figure 3.3).
  • Adjust fan curves in BIOS or software to increase fan speeds under load.
  • Clean dust from all internal components, heatsinks, and radiators.

7. Spécifications

Detailed specifications for the darkFlash DS900 PC Case and included fans.

FonctionnalitéDétail
MarqueFlash sombre
Nom du modèleDS900
Type de casTour
Compatibilité de la carte mèreATX
CouleurBlanc
Méthode de refroidissementAir
Ventilateurs inclus4 x 120mm PWM ARGB Fans (G16)
Support Max FanJusqu'à 10 fans
Support de radiateurJusqu'à 360 mm
Dégagement GPUJusqu'à 425 mm (16.7 pouces)
Dégagement du refroidisseur de processeurJusqu'à 170 mm
Fan Speed (G16)≤2200 RPM
Fan Air Capacity (G16)≤52.96 CFM
Fan Pressure (G16)≤1.96 MMH2O
Noise Level (G24 Hydro-bearing fans)33.5 dBA
Ports USB 3.04
Close-up of darkFlash G16 120mm ARGB & PWM fan with specifications

Figure 7.1: Detailed specifications for the G16 120mm ARGB & PWM fans, including fan speed, air capacity, and pressure.

Graph showing low noise operation decibel level of darkFlash magnetic fan

Figure 7.2: Noise level comparison, highlighting the low noise operation of the darkFlash magnetic fans at approximately 33 dBA.

8. Garantie et assistance

Specific warranty details are not provided in this manual. For warranty information, technical support, or further assistance, please contact darkFlash customer service or visit the official darkFlash website.

You can find more information and support resources on the darkFlash Amazon Store: Boutique darkFlash.

9. Ressources vidéo

No official product videos from the seller were available in the provided data. Please check the darkFlash official website or their Amazon store for any available video guides or demonstrations.

Documents connexes - DS900

Préview Ventilateur de refroidissement à épissure magnétique darkFlash série GAUSS - Spécifications et guide
Informations détaillées sur le ventilateur de refroidissement à connexion magnétique darkFlash GAUSS SERIES : spécifications, accessoires inclus et instructions de branchement. Caractéristiques : diamètre de 120 mm, roulement hydraulique et éclairage ARGB.
Préview Guide d'installation du boîtier PC ATX de luxe DS900
Guide d'installation complet pour le boîtier PC ATX de luxe DS900 de darkFlash, détaillant l'installation des composants, les fonctionnalités et les spécifications.
Préview Guide d'installation du boîtier PC ATX de luxe darkFlash DS900
Guide d'installation détaillé du boîtier PC ATX de luxe darkFlash DS900, doté d'un panneau latéral panoramique en verre. Apprenez à assembler votre PC grâce à ce manuel complet.
Préview Guide d'installation du boîtier PC de luxe entièrement en mesh DarkFlash DLC 29
Guide d'installation complet pour le boîtier PC de luxe DarkFlash DLC 29 Full Mesh, détaillant les spécifications, les pièces et les instructions de montage étape par étape pour les assembleurs de PC.
Préview Boîtier ATX de luxe darkFlash DS500 - Spécifications et guide d'installation
Spécifications détaillées, dégagements et guide d'installation du boîtier darkFlash DS500 Luxury ATX avec vitres en verre trempé et panoramique. Comprend la liste des accessoires, la compatibilité des composants et les instructions de montage.
Préview Guide d'installation du boîtier PC darkFlash DS900M | Châssis M-ATX/ITX
Guide d'installation officiel du boîtier PC darkFlash DS900M LUXURY M-ATX/ITX. Ce guide détaille le processus d'assemblage du DS900M, un châssis d'ordinateur haut de gamme doté de panneaux avant et latéraux en verre. ampl'espace nécessaire aux composants et un système de refroidissement robuste.