Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP TV Mounts, including the MU0057 Full Motion Wall Mount and the MU0049 Under Cabinet Mount. Please read this manual thoroughly before installation to ensure safe and correct usage.
Informations importantes sur la sécurité :
- Do not attempt installation if you are unsure about the process. Consult a qualified professional.
- Assurez-vous que la surface de montage puisse supporter le poids combiné du support et de votre téléviseur.
- Always use the provided hardware and follow the instructions carefully.
- Tenir les enfants et les animaux domestiques éloignés pendant l’installation.
- Periodically check all connections for tightness and security.
Contenu du colis
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact MOUNTUP customer support.
- 1 x MOUNTUP MU0057 Full Motion TV Wall Mount
- 1 x MOUNTUP MU0049 Under Cabinet TV Mount
- Hardware Kit (screws, anchors, washers, spacers, etc.)
- Manuel d'installation (ce document)
Image : Terminéview of the MOUNTUP MU0057 Full Motion TV Wall Mount and MU0049 Under Cabinet TV Mount, including mounting plates and articulating arms.
Caractéristiques
MOUNTUP MU0057 Support mural pour téléviseur à mouvement complet
| Fonctionnalité | Spécification |
|---|---|
| Taille de téléviseur compatible | 26 à 60 pouces |
| Capacité de poids | Jusqu'à 77 lb (35 kg) |
| Compatibilité VESA | Max 400x400mm |
| Type de mouvement | Articulating, Full Motion |
| Matériel | Aluminum, Steel, or Composite Material |
MOUNTUP MU0049 Under Cabinet TV Mount
| Fonctionnalité | Spécification |
|---|---|
| Taille de téléviseur compatible | 13 à 32 pouces |
| Capacité de poids | Jusqu'à 22 lb (10 kg) |
| Compatibilité VESA | 75x75mm, 100x100mm |
| Type de mouvement | Foldable, Tilt, Swivel, Rotation |
| Matériel | Aluminum, Steel, or Composite Material |
Configuration et installation
Avant de commencer :
- Ensure you have all necessary tools (e.g., drill, stud finder, level, screwdriver).
- Verify the wall structure (for MU0057) or cabinet structure (for MU0049) can safely support the weight.
- Unpack all components and identify them using the parts list in your physical manual.
Installation of MOUNTUP MU0057 Full Motion TV Wall Mount
This mount is designed for installation on wood studs or concrete/brick walls. Ne pas installer uniquement sur une cloison sèche.
- Déterminez l’emplacement de montage : Use a stud finder to locate the center of the wood studs. Mark the desired height for your TV.
- Fixer la plaque murale : Position the wall plate at the marked location. Use a level to ensure it is straight. Mark the drilling points.
- Percer des trous pilotes : Drill pilot holes according to the recommended drill bit size for your wall type (wood stud or concrete).
- Plaque murale sécurisée : Attach the wall plate to the wall using the appropriate lag bolts and washers. Tighten securely.
- Fixez les supports de télévision : Attach the two vertical TV brackets to the back of your television using the correct VESA screws, washers, and spacers. Ensure the brackets are centered and level.
- Fixez le téléviseur à la plaque murale : Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the safety locks are engaged.
- Ajuster et sécuriser : Adjust the tilt, swivel, and extension as desired. Tighten any adjustment screws to secure the TV in position.
Image: Components of the MOUNTUP MU0057 wall mount, including the wall plate, articulating arm, VESA plate, and a small level for installation.
Image: The MOUNTUP MU0057 long arm full motion TV mount extended from the wall, showing its maximum extension of 30 inches (750mm) and various arm segment lengths.
Image: The MOUNTUP MU0057 TV mount installed in a room corner, demonstrating its flexible arm folding capability for corner installations.
Installation of MOUNTUP MU0049 Under Cabinet TV Mount
This mount is designed for installation under cabinets or shelves. Ensure the cabinet/shelf material is sturdy enough to support the mount and TV weight.
- Déterminez l’emplacement de montage : Choose a suitable location under a cabinet or shelf. Ensure there is enough clearance for the TV to fold up and down.
- Fixer la plaque de montage : Position the top mounting plate under the cabinet. Mark the drilling points.
- Percer des trous pilotes : Percez des avant-trous dans la face inférieure du meuble.
- Plaque de montage sécurisée : Attach the mounting plate using the provided screws. Tighten securely.
- Fixez les supports de télévision : Attach the VESA plate to the back of your television using the correct VESA screws, washers, and spacers.
- Connect TV to Mount: Secure the TV (with VESA plate) to the main arm of the under cabinet mount.
- Test Folding Mechanism: Gently test the folding mechanism to ensure smooth operation and proper clearance.
Image: The MOUNTUP MU0049 under cabinet TV mount, showing its compact design and VESA plate.
Image: The MOUNTUP MU0049 under cabinet TV mount installed in a kitchen, illustrating its compatibility with VESA 75x75/100x100, max 32-inch screens, and 22 lbs weight capacity.
Image: The MOUNTUP MU0049 under cabinet TV mount demonstrating its foldable design, showing the TV folded up to 4 inches from the cabinet and folded back 135 degrees.
Mode d'emploi
MOUNTUP MU0057 Support mural pour téléviseur à mouvement complet
- Extension/Rétraction : Gently pull or push the TV to extend or retract the arm.
- Pivot: Rotate the TV left or right to achieve the desired viewangle de vue.
- Inclinaison: Loosen the tilt adjustment knobs (if applicable), adjust the screen angle up or down, and then re-tighten the knobs.
- Réglage du niveau: Some models allow for minor post-installation leveling adjustments. Refer to your physical manual for specific instructions.
Image: The MOUNTUP MU0057 double arm folding TV mount, illustrating its ability to extend and swivel, allowing the screen to cross the wall for optimal viewing.
MOUNTUP MU0049 Under Cabinet TV Mount
- Pliage/Dépliage : Gently pull down the TV to unfold it from its stored position. Push it up until it locks into place to fold it away.
- Inclinaison: Adjust the screen's vertical angle by tilting the TV up or down.
- Pivot: Rotate the TV horizontally (left or right) for optimal viewing.
- Rotation: The mount allows for screen rotation (-90°/+90°) to switch between landscape and portrait orientation.
Image: The MOUNTUP MU0049 under cabinet TV mount demonstrating its adjustable viewing angles, including tilt (+3°/-10°), 360° swivel, and -90°/+90° rotation.
Entretien
- Inspection régulière : Periodically check all screws, bolts, and connections to ensure they remain tight and secure.
- Nettoyage: Nettoyez le support avec un chiffon doux et sec. Évitez les nettoyants abrasifs ou les solvants qui pourraient endommager la finition.
- Lubrification: Moving parts are generally maintenance-free. If any movement becomes stiff, consult customer support before applying lubricants.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| TV is not level after installation (MU0057) | Wall plate not level; minor adjustment needed. | Check the wall plate with a level. Some mounts allow for post-installation leveling. Refer to your physical manual. |
| Le support semble instable | Screws not fully tightened; incorrect wall anchors used; wall/cabinet not strong enough. | Ensure all screws are securely tightened. Verify the mounting surface can support the weight. If unsure, consult a professional. |
| Le téléviseur ne s'adapte pas au support. | Configuration VESA incorrecte ; téléviseur trop grand/lourd. | Verify your TV's VESA pattern, size, and weight against the mount's specifications (MU0057: 26-60 inch, 77lbs, Max 400x400mm; MU0049: 13-32 inch, 22lbs, 75x75/100x100mm). |
| Difficulté à déplacer le support | Adjustment screws too tight; lack of lubrication. | Loosen any adjustment screws slightly. If the issue persists, contact customer support. |
Garantie et assistance
MOUNTUP products are designed for durability and performance. For warranty information, technical support, or to report missing/damaged parts, please contact MOUNTUP customer service directly.
Assistance clientèle MOUNTUP :
- Website: www.mountup.com
- Email: support@mountup.com
- Téléphone : 1-800-XXX-XXXX
Please have your model number (MU0057, MU0049) and purchase information ready when contacting support.
