1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Ultralux Framed 1x4 ft LED Light Panel. Please read this manual thoroughly before installation and retain it for future reference. This LED light panel is designed to provide crisp, clear lighting for various indoor environments such as kitchens, home offices, and commercial spaces.
Les principales caractéristiques comprennent :
- 4000 lumens output with 5 CCT (Correlated Color Temperature) options: 2700K, 3000K, 4000K, 5000K, 6500K.
- TRIAC dimmable functionality for adjustable light intensity.
- Integrated frame for surface mounting.
- Convient pour damp emplacements.
- Durable aluminum and plastic construction with an L70 lifetime of over 50,000 hours.
Image 1.1: Ultralux 1x4 ft LED Light Panel installed in a modern kitchen, showcasing its minimalist design and bright illumination.
2. Consignes de sécurité
AVERTISSEMENT : Risque de choc électrique. Coupez l’alimentation au niveau du disjoncteur avant toute installation ou intervention.
- Lisez toutes les instructions avant de commencer l'installation.
- Ce produit doit être installé conformément au code d’installation applicable par une personne connaissant la construction et le fonctionnement du produit ainsi que les dangers encourus.
- Assurer le vol d'alimentationtage is compatible with the fixture (120V AC).
- Ne tentez pas de modifier l'appareil. Toute modification pourrait annuler la garantie et engendrer des risques pour la sécurité.
- Do not install near heat sources or in areas with excessive moisture. This fixture is suitable for damp pour des endroits non exposés directement à l'eau.
- Portez des lunettes de sécurité et des gants pendant l'installation.
- Une mise à la terre appropriée est requise pour la sécurité.
3. Contenu du colis
Vérifiez que tous les composants sont présents avant de commencer l'installation :
- Ultralux Framed 1x4 ft LED Light Panel
- Plaque de montage en surface
- Câble de sécurité
- Matériel de montage (vis, chevilles)
- Manuel d'instructions (ce document)
Image 3.1: Illustration of the light panel's dimensions and the included mounting accessories for installation.
4. Configuration et installation
Follow these steps for proper installation of your LED light panel:
- Couper l'alimentation : Before starting, ensure power is disconnected at the circuit breaker to prevent electrical shock.
- Sélectionnez la température de couleur (CCT) : Locate the CCT switch on the back of the light panel. Adjust this switch to your desired color temperature (2700K, 3000K, 4000K, 5000K, or 6500K) BEFORE installation. This setting cannot be changed easily after mounting.
- Install Surface Mount Plate: Attach the surface mount plate directly to the ceiling, ensuring it is securely fastened to a junction box or structural support using the provided screws and anchors.
- Effectuer les connexions électriques : Connect the fixture's wires to the building's electrical wires (Black to Black, White to White, Ground to Ground) according to local electrical codes. Use appropriate wire connectors.
- Secure with Safety Cable: While making wire connections, use the provided safety cable to temporarily support the light panel, preventing it from falling.
- Panneau lumineux de montage : Carefully slide the light panel into the installed surface mounting plate until it clicks securely into place. Ensure all wires are tucked safely inside the junction box and the panel is flush with the ceiling.
- Restaurer l'alimentation : Once installation is complete and secure, restore power at the circuit breaker.
Image 4.1: The CCT switch on the back of the panel allows selection of five color temperatures (Warm White, Soft White, Cool White, Natural White, Daylight) prior to installation.
The light panel features a minimalist design with an integrated frame. Decorative frame options may also be available, offering a different aesthetic.
Image 4.2: Visual comparison between the standard integrated frame and an optional decorative frame for the light panel.
5. Mode d'emploi
Your Ultralux LED Light Panel is designed for simple operation once installed.
- Marche/Arrêt : Use your standard wall switch to turn the light panel on or off.
- Réglage de la température de couleur (CCT) : The CCT is set via a switch on the back of the panel during installation (refer to Section 4). It is not intended for frequent adjustment after mounting.
- Fonctionnalité de gradation : This fixture is TRIAC dimmable. To utilize the dimming feature, connect the light panel to a compatible TRIAC dimmer switch (not included). Adjust the dimmer switch to achieve your desired brightness level.
Image 5.1: The light panel supports smooth TRIAC dimming. A list of compatible Lutron dimmer models is provided for reference.
6. Entretien
The Ultralux LED Light Panel requires minimal maintenance.
- Nettoyage: Assurez-vous que l'alimentation est coupée avant de nettoyer. Utilisez un chiffon doux, sec ou légèrement rêche.amp cloth to wipe the surface of the light panel. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or electrical components.
- Aucune pièce réparable par l'utilisateur : There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the light panel.
- Durée de vie de la LED: The integrated LED light source has a long lifespan of over 50,000 hours, reducing the need for frequent bulb replacement.
7. Dépannage
If you encounter issues with your light panel, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas. |
|
|
| La lumière vacille ou faiblit de façon irrégulière. |
|
|
| Température de couleur incorrecte. | CCT switch set incorrectly during installation. | Power off, carefully remove the panel, adjust the CCT switch on the back, and re-install. |
Si le problème persiste après avoir essayé ces solutions, contactez le service client.
8. Spécifications
Detailed technical specifications for the Ultralux Framed 1x4 ft LED Light Panel:
| Numéro de modèle | UL-IFP-12-48-40W-2765 |
| Dimensions (L x l x H) | 48.5" x 12.5" x 1.2" |
| Quoitage | 40 watts |
| Luminosité | 4000 lumens |
| Température de couleur (CCT) | 2700K, 3000K, 4000K, 5000K, 6500K (Switchable) |
| Gradabilité | TRIAC Gradable |
| CRI | >80 |
| Angle du faisceau | 120 degrés |
| Matériel | Aluminium, plastique |
| Type d'installation | Montage en surface |
| Utilisation intérieure/extérieure | Utilisation en intérieur uniquement |
| Niveau de résistance à l'eau | Water Resistant (Suitable for damp Emplacements) |
| Durée de vie | ≥ 50,000 Hours (L70) |
| Certifications | Répertorié ETL |
Image 8.1: A summary of key technical specifications for the Ultralux LED Light Panel.
Image 8.2: Visual representation of the Ultralux difference, highlighting flicker-free and consistent color temperature output compared to a competitor.
9. Garantie
The Ultralux Framed 1x4 ft LED Light Panel comes with a Garantie limitée de 5 ans from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. It does not cover damage resulting from improper installation, accident, abuse, misuse, or unauthorized modification.
For warranty claims, please retain your proof of purchase and contact Ultralux customer support.
10. Assistance clientèle
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Ultralux customer support.
Manufacturer: Cleanlife LLC
For more information, visit the official Ultralux store: Boutique Ultralux sur Amazon