BirdDog X5 Ultra PTZ Camera User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your BirdDog X5 Ultra PTZ Camera. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.

1.1 Contenu du paquet

• BirdDog X5 Ultra PTZ Camera with 20x Optical Zoom
• Télécommande IR
• Alimentation 12 VCC
• USB-C Cable (5.9')

2. Produit terminéview

2.1 Principales caractéristiques

• Capture up to UHD 4K60 Resolution Video with 20x Optical Zoom and AI Auto Tracking/Framing.
• Built-In NDI|HX3 Support.
• 12G-SDI, HDMI 2.0 & USB/UVC Outputs.
• Two Integrated 2.93" E-Ink Displays.
• Built-In Halo Tally.
• PoE+ Support.
• Color Matrix for high quality in low-light conditions.
• Gigabit Ethernet connectivity.

2.2 Composants de la caméra

Familiarize yourself with the various parts of the BirdDog X5 Ultra PTZ Camera.

Figure 1 : Face avant view of the BirdDog X5 Ultra PTZ Camera. The camera features a prominent lens and an illuminated green tally light indicating its operational status.

Figure 2 : Côté view of the camera, highlighting the E-Ink display which shows network information and a QR code for easy access to camera settings or support.

Figure 3 : Arrière view of the camera, detailing the various connectivity ports including LAN/PoE+, RS232/422, Audio In, HDMI-2, USB-C, HDMI-1 (MAIN), 12G-SDI, and DC 12V power input.

3. Installation

3.1 Alimentation de la caméra

1. Connect the provided 12 VDC Power Supply to the "DC 12V" port on the rear of the camera.
2. Alternatively, connect a PoE+ enabled Ethernet cable to the "LAN/PoE+" port for power and network connectivity.

3.2 Connexions vidéo et audio

1. For video output, connect a 12G-SDI cable to the "12G-SDI" port or an HDMI 2.0 cable to the "HDMI-1 (MAIN)" or "HDMI-2" ports.
2. For USB video, connect the USB-C cable to the "USB-C" port and to your computer.
3. For external audio input, connect an audio source to the "AUDIO IN" port.

Connexion réseau 3.3

Connect an Ethernet cable from your network switch or router to the "LAN/PoE+" port on the camera. This enables NDI|HX3 streaming and IP control.

4. Mode d'emploi

4.1 Commande de base de la caméra

The camera can be controlled via the included IR remote, IP control software, or a compatible hardware controller.

Using the IR Remote Controller

• Point the IR remote towards the front of the camera.
• Use the directional buttons to pan and tilt the camera.
• Use the zoom buttons to adjust the optical zoom.
• Refer to the remote's specific instructions for advanced functions.

4.2 NDI|HX3 Streaming

The BirdDog X5 Ultra supports NDI|HX3 for low-latency, high-quality video transmission over IP.

1. Assurez-vous que la caméra est connectée à votre réseau.
2. On your NDI-enabled receiving device or software, the BirdDog X5 Ultra should appear as an available NDI source.
3. Select the camera as your NDI source to begin streaming.

4.3 AI Auto Tracking/Framing

The camera features AI-powered auto tracking and framing to keep subjects in view.

Consult the BirdDog X5 Ultra software interface or advanced settings for configuration and activation of AI features.

5. Entretien

5.1 Nettoyage

• Essuyez délicatement le boîtier de l'appareil photo avec un chiffon doux et sec.
• Pour la lentille, utilisez un chiffon et une solution de nettoyage spécifiques. Évitez les matériaux abrasifs.
• Assurez-vous que tous les ports sont exempts de poussière et de débris.

5.2 mises à jour du micrologiciel

Consultez régulièrement le site officiel Chien-oiseau website for firmware updates. Keeping your camera's firmware up-to-date ensures optimal performance and access to new features.

6. Dépannage

6.1 Pas d'alimentation

• Verify the 12 VDC power supply is securely connected and plugged into a working outlet.
• If using PoE+, ensure your Ethernet switch supports PoE+ and the cable is properly connected.

6.2 Aucune sortie vidéo

• Check all video cables (SDI, HDMI, USB-C) for secure connections.
• Ensure the receiving device (monitor, capture card) is correctly configured to the input source.
• For NDI, confirm network connectivity and that the NDI source is selected in your software.

6.3 Camera Not Responding to Control

• For IR remote, ensure line of sight and check battery.
• For IP control, verify network connection and IP address settings.

7. Spécifications

8. Garantie et assistance

For warranty information and technical support, please visit the official Chien-oiseau website ou contactez leur service client.

Product registration may be required for warranty claims.