Xtreme Smart Wi-Fi Window & Door Sensor User Manual

Introduction

This manual provides instructions for the installation, operation, and maintenance of your Xtreme Smart Wi-Fi Window & Door Sensor. This device is designed to enhance home security by detecting the opening and closing of windows and doors, sending instant notifications to your smartphone.

Consignes de sécurité

• N’exposez pas l’appareil à des températures extrêmes, à la lumière directe du soleil ou à l’humidité.
• N’essayez pas de démonter ou de réparer l’appareil vous-même. Cela annulera la garantie.
• Gardez les piles hors de portée des enfants. En cas d'ingestion, consulter immédiatement un médecin.
• Dispose of batteries according to local regulations. Do not mix old and new batteries.
• Ensure the installation surface is clean and dry for proper adhesive attachment.

Contenu du colis

Vérifiez que tous les éléments sont présents dans votre colis :

• Xtreme Smart Wi-Fi Window & Door Sensor (Main Unit)
• Xtreme Smart Wi-Fi Window & Door Sensor (Magnetic Contact)
• Manuel de l'utilisateur (ce document)

Image: The main sensor unit and the smaller magnetic contact unit.

Guide d'installation

1. Installation de la batterie

1. Gently slide open the battery cover on the main sensor unit.
2. Insérez deux piles AAA (non incluses) dans le compartiment, en veillant à respecter la polarité (+/-).
3. Fermez soigneusement le couvercle de la batterie.

Image: The main sensor unit with its battery compartment open, showing where to insert two AAA batteries.

2. Téléchargement de l'application et création d'un compte

1. Téléchargez le Xtreme Connect Home App from the Apple App Store (for iOS 11 or higher) or Google Play Store (for Android 7.0 or higher).
2. Ouvrez l'application et suivez les instructions à l'écran pour créer un nouveau compte ou vous connecter si vous en avez déjà un.

Image: The product box illustrating the Xtreme Connect Home App download options for both iOS and Android devices.

3. Couplage de l'appareil

1. Ensure your smartphone is connected to a 2.4GHz Wi-Fi network. The sensor does not support 5GHz networks.
2. In the Xtreme Connect Home App, tap the "+" icon to add a new device.
3. Select "Sensor" or "Door/Window Sensor" from the device list.
4. Follow the app's instructions to put the sensor into pairing mode (usually involves pressing and holding a button on the sensor until an indicator light flashes).
5. Confirm the Wi-Fi network and enter the password in the app. The sensor will then connect to your home network.
6. Once successfully paired, you can name your sensor within the app (e.g., "Front Door," "Bedroom Window").

4. Installation physique

The sensor consists of two parts: a main unit and a smaller magnetic contact. These two parts must be installed close to each other (within 1 cm) on a door or window frame.

1. Choose a clean, dry, and flat surface on your door or window frame.
2. Peel off the protective backing from the adhesive on both the main unit and the magnetic contact.
3. Attach the main unit to the fixed part of the door/window frame.
4. Attach the magnetic contact to the moving part of the door/window (the door or window itself), aligning it with the main unit so they are no more than 1 cm apart when the door/window is closed.
5. Test the installation by opening and closing the door/window. The app should register the change in status.

Image: Left: The sensor installed on a window sill with the window closed. Right: The sensor detecting an open window, with the magnetic contact separated from the main unit.

Opération

Monitoring Door/Window Status

Once installed and paired, the Xtreme Smart Wi-Fi Window & Door Sensor will continuously monitor the open/closed status of your designated entry point. When the magnetic contact separates from the main unit (door/window opens), the sensor will detect this change.

Notifications instantanées

Upon detecting an open or close event, the sensor will send an instant notification to your smartphone via the Xtreme Connect Home App. Ensure app notifications are enabled in your phone's settings to receive these alerts.

Accès à distance

Tu peux view the current status of your sensor (open or closed) and review event history from anywhere using the Xtreme Connect Home App, provided your smartphone has an internet connection.

Smart Scenes Integration

The Xtreme Connect Home App allows you to create "Smart Scenes" to automate actions based on sensor activity. For example:

• "If door opens, then turn on living room lights."
• "If window opens after 10 PM, then send an alert to family members."

Explore the "Smart Scenes" section within the app to customize your home automation.

Entretien

Remplacement de la batterie

The sensor is powered by two AAA batteries. When the battery level is low, you may receive a notification via the Xtreme Connect Home App. To replace batteries:

1. Gently slide open the battery cover on the main sensor unit.
2. Retirez les anciennes piles.
3. Insert two new AAA alkaline batteries, ensuring correct polarity (+/-).
4. Fermez soigneusement le couvercle de la batterie.

Note: The sensor is designed for up to four months of battery life under normal usage conditions.

Nettoyage

Wipe the sensor with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device.

Dépannage

Caractéristiques

Garantie et assistance

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Xtreme Digital Lifestyle Accessories website. Do not attempt to return the product to the retailer without first contacting customer support, as per manufacturer guidelines.

Fabricant: Extrême

Marque: ACCESSOIRES DE STYLE DE VIE NUMÉRIQUE EXTRÊME