1. Introduction
Welcome to the world of high-fidelity audio with your new Pro-Ject Debut EVO 2 Audiophile Turntable. This manual provides essential information for setting up, operating, and maintaining your turntable to ensure optimal performance and longevity. Please read it thoroughly before first use.
The Debut EVO 2 features a carbon fiber tonearm, electronic speed selection, and a pre-mounted Pick it MM EVO cartridge, designed for exceptional sound reproduction.
2. Installation
Proper setup is crucial for the best sound quality and to prevent damage to your turntable and records.
2.1 Déballage et placement
Carefully remove all components from the packaging. Retain the original packaging for future transport or service. Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and vibrations.
Figure 2.1: Pro-Ject Debut EVO 2 Turntable with dust cover. Ensure the turntable is placed on a stable, level surface.
2.2 Installation du plateau et de la courroie
- Place the main platter onto the spindle.
- Locate the drive belt. Carefully stretch the belt around the motor pulley and the sub-platter rim.
Figure 2.2 : Gros plan view of the sub-platter and belt drive system. The belt connects the motor pulley to the sub-platter for rotation.
2.3 Configuration du bras de lecture et de la cellule
The Debut EVO 2 comes with a pre-mounted Pick it MM EVO cartridge. Follow these steps for tonearm setup:
- Réglage du contrepoids : Gently push the counterweight onto the rear of the tonearm. With the anti-skating weight removed, balance the tonearm so it floats freely and horizontally. Lock the tonearm in its rest.
- Paramètre de force de suivi : Rotate the tracking force scale ring to '0' while holding the counterweight steady. Then, rotate the counterweight (and scale ring) counter-clockwise until the desired tracking force (typically 1.8g for the Pick it MM EVO) is indicated.
- Réglage anti-patinage : Attach the anti-skating weight to the small groove on the anti-skating stub. The recommended setting for the Pick it MM EVO cartridge is the second groove from the tonearm pivot.
Figure 2.3: Detail of the carbon fiber tonearm, showing the counterweight and anti-skating weight. These components are critical for proper cartridge tracking.
Figure 2.4: The pre-mounted Pick it MM EVO cartridge on the tonearm. This cartridge is designed to deliver lively and robust sound.
2.4 Connexions
Connect the supplied phono cable to the RCA output jacks on the rear of the turntable and to the phono input (or line input via a phono preamplifier) of your amplifier. Ensure the ground wire is connected to the ground terminal on your ampAmplificateur pour minimiser le bourdonnement.
Branchez l'adaptateur secteur à l'entrée d'alimentation de la platine, puis à une prise murale appropriée.
Figure 2.5: Rear panel of the turntable with RCA output jacks and ground terminal. Proper connection to an amplifier is essential for audio output.
3. Mode d'emploi
This section details the steps for playing records and using the turntable's features.
3.1 Mise sous tension et sélection de la vitesse
Press the power button to turn on the turntable. The Debut EVO 2 features electronic speed selection. Use the speed selector switch (usually located on the plinth) to choose between 33 1/3 RPM, 45 RPM, or 78 RPM (requires a different belt and stylus, sold separately).
Video 3.1: Pro-Ject Debut Evo 2 Introduction. This video provides a visual overview of the turntable's features and operation.
3.2 Jouer un disque
- Placez un disque sur le plateau.
- Select the correct playback speed (33 1/3 or 45 RPM).
- Soulevez le bras de lecture à l'aide du levier de levage.
- Carefully position the stylus over the lead-in groove of the record.
- Lower the tonearm gently using the cueing lever. The stylus will descend onto the record and begin playback.
Figure 3.1 : Vue de dessus view of the turntable during record playback. The tonearm is positioned over the record.
3.3 Arrêt de la lecture
- Soulevez le bras de lecture à l'aide du levier de levage.
- Remettez le bras de lecture sur son support et fixez-le avec la pince prévue à cet effet.
- Turn off the turntable by pressing the power button.
4. Entretien
Un entretien régulier garantit la longévité et les performances optimales de votre platine vinyle.
4.1 Nettoyage du plateau tournant
- Cache-poussière : Nettoyez le couvercle anti-poussière avec un chiffon doux et sec.amp chiffon. Évitez les nettoyants abrasifs.
- Plinth and Platter: Use a soft, lint-free cloth to wipe the plinth and platter. For stubborn marks, a slightly damp On peut utiliser un chiffon, puis un chiffon sec.
- Style: Use a dedicated stylus cleaning brush or fluid to gently clean the stylus. Always brush from back to front.
4.2 Remplacement de la courroie
The drive belt may stretch or degrade over time. If you notice inconsistent speed or reduced performance, the belt may need replacement. Contact Pro-Ject support or an authorized dealer for a replacement belt.
5. Dépannage
Cette section aborde les problèmes courants que vous pourriez rencontrer avec votre platine vinyle.
| Problème | Cause possible | Solution |
|---|---|---|
| Pas de courant | Power cable not connected; faulty power outlet | Check power connections; try a different outlet |
| Pas de son sur un ou les deux canaux | Incorrect cable connection; damaged cartridge/stylus; amplifier input issue | Check RCA connections; ensure ground wire is connected; inspect stylus for damage; test amplifier with another source |
| Bruit de bourdonnement | Ground wire not connected; proximity to other electronics; faulty cables | Ensure ground wire is securely connected; move turntable away from other devices; try different cables |
| Vitesse irrégulière | Worn or stretched drive belt; motor issue | Replace drive belt; contact support if issue persists |
| Son saccadé ou déformé | Incorrect tracking force/anti-skating; dirty stylus; damaged record | Re-adjust tracking force and anti-skating; clean stylus; inspect record for damage |
6. Spécifications
Key technical specifications for the Pro-Ject Debut EVO 2 Turntable.
- Modèle: Débuts EVO 2
- Numéro de modèle de l'article : 9120129864978
- Marque: Projet
- Dimensions du produit : 16.4 x 12.6 x 4.5 pouces (41.66 x 32.00 x 11.43 cm)
- Poids de l'article : 13.2 livres (6 kg)
- Matériau du plateau : Damped Aluminum (1.7kg, anti-magnetic)
- Bras de lecture: Fibre de carbone
- Cartouche: Pick it MM EVO (pre-mounted)
- Vitesse: 33 1/3, 45 RPM (78 RPM with optional belt/stylus)
- Technologie de connectivité: Auxiliary (RCA outputs)
- Composants inclus : Turntable, transparent dustcover, connection cable, power adapter, alignment protractor, single adapter.
- Caractéristiques spéciales : Carbon Fiber Tonearm, Damped Aluminum Platter, High-Quality Cartridge, Electronic Speed Selection, 25-Year Spare Parts Guarantee.
7. Informations sur la garantie
Pro-Ject Audio Systems offers a 25-year spare parts availability guarantee for this turntable, ensuring long-term support for your product. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Pro-Ject website.
Des plans de protection sont également disponibles à l'achat :
- Plan de protection de 2 ans
- Plan de protection de 3 ans
- Protection complète (abonnement mensuel)
8. Assistance et contact
For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems website de ressources d'assistance.
Vous pouvez également visiter le Boutique Pro-Ject sur Amazon pour plus d'informations sur le produit et les accessoires.
