1. Informations importantes sur la sécurité
Please read and understand all safety instructions before installing or operating the darkFlash DNA240A AIO CPU Liquid Cooler. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- Sécurité électrique : Ensure your power supply is disconnected from the wall outlet before beginning installation. Only connect the cooler to compatible power sources as specified.
- Manutention: Handle the cooler and its components with care. Avoid bending or kinking the liquid tubes. Do not apply excessive force to the radiator fins or pump head.
- Liquid Coolant: The cooler contains a sealed liquid coolant. Do not attempt to open or modify the sealed unit. In case of a leak, immediately disconnect power and contact support.
- Électricité statique: Always ground yourself before handling internal PC components to prevent electrostatic discharge (ESD) damage.
- Ventilation: Ensure adequate airflow within your PC case to facilitate proper heat dissipation from the radiator.
- Compatibilité: Verify compatibility with your CPU socket (Intel LGA 1200/115X/1700/1851, AMD AM4/AM5/AM2/AM2+/AM3/AM3+/FM1/FM2) and PC case dimensions before installation.
2. Contenu du colis
Carefully unpack the darkFlash DNA240A AIO CPU Liquid Cooler and verify that all components are present and undamaged. If any items are missing or damaged, please contact darkFlash customer support.
- darkFlash DNA240A AIO Liquid Cooler (Radiator, Pump, and Tubes pre-assembled)
- 2 ventilateurs ARGB PWM de 120 mm
- Intel Mounting Bracket Kit (LGA 1200/115X/1700/1851)
- AMD Mounting Bracket Kit (AM4/AM5/AM2/AM2+/AM3/AM3+/FM1/FM2)
- Vis de ventilateur
- Vis de montage du radiateur
- Pâte thermique (pré-appliquée ou en tube)
- Manuel de l'utilisateur (ce document)
Image: The darkFlash DNA240A AIO CPU Liquid Cooler, showcasing the radiator, two ARGB fans, and the pump head with its integrated tubing.
3. Configuration et installation
This section provides general guidelines for installing your darkFlash DNA240A AIO CPU Liquid Cooler. Specific steps may vary slightly depending on your motherboard and PC case. Refer to your motherboard and case manuals for detailed instructions.
3.1 Préparez votre système
- Éteindre: Éteignez complètement votre ordinateur et débranchez le câble d'alimentation de la prise murale.
- Dossier ouvert : Ouvrez le boîtier de votre PC pour accéder à la carte mère et à la zone du processeur.
- Retirer l'ancien refroidisseur : If an existing CPU cooler is installed, carefully remove it and clean any old thermal paste from the CPU surface using isopropyl alcohol.
3.2 Installer le support de montage
Select the appropriate mounting bracket for your CPU socket (Intel or AMD).
Image: Separate mounting brackets for Intel and AMD CPU sockets, ensuring broad compatibility.
- For Intel Sockets (LGA 1200/115X/1700/1851): Attach the Intel backplate to the rear of your motherboard, aligning the holes. Secure the standoffs through the motherboard from the front.
- For AMD Sockets (AM4/AM5/AM2/AM2+/AM3/AM3+/FM1/FM2): Use the existing AMD backplate (if present) or install the provided AMD backplate. Secure the AMD mounting clips to the pump head, then attach the pump to the CPU socket retention module.
3.3 Montage du radiateur et des ventilateurs
- Fixez les ventilateurs au radiateur : Secure the two 120mm PWM ARGB fans to the radiator using the provided fan screws. Ensure the fan airflow direction is appropriate for your case's ventilation (typically exhausting air out of the case).
- Radiateur de montage : Install the radiator assembly into your PC case. Common mounting locations include the top, front, or rear of the case, depending on available space and radiator size (240mm). Use the longer radiator mounting screws to secure it.
Image: Diagram illustrating the dimensions of the 240mm and 360mm radiators, important for case compatibility.
3.4 Install Pump Head
- Appliquer de la pâte thermique : If the thermal paste is not pre-applied to the cold plate, apply a small pea-sized amount to the center of your CPU's integrated heat spreader (IHS).
- Positionner la pompe : Carefully place the pump head onto the CPU, aligning it with the mounting standoffs or clips.
- Pompe sécurisée : Tighten the retention screws in a diagonal pattern until the pump head is firmly seated. Do not overtighten.
Image : Une explosion view of the pump's internal structure, highlighting the optimized flow rate design for efficient cooling.
3.5 câbles de connexion
The darkFlash DNA240A features an embedded single-line design for simplified connections.
Image: Illustration of the simplified cable management, featuring a pre-connected 7-pin cable ready for 4-pin (PWM) and 5V 3-pin (ARGB) connections.
- Puissance de la pompe: Connectez le connecteur à 3 ou 4 broches de la pompe à l'en-tête CPU_FAN ou AIO_PUMP de votre carte mère.
- Fan Power (PWM): Connect the fan's 4-pin PWM connector to an available fan header on your motherboard (e.g., SYS_FAN or CPU_OPT).
- Éclairage ARGB : Connect the 5V 3-pin ARGB connector to a compatible 5V addressable RGB header on your motherboard. (Note: Do NOT connect to a 12V RGB header, as this will damage the LEDs.)
- Gestion des câbles: Disposez les câbles proprement pour assurer une bonne circulation de l'air et un montage propre.
Image: The darkFlash AIO cooler installed in a PC, demonstrating the vibrant RGB animations from both the fans and the pump head, compatible with ASUS Aura Sync and other motherboard RGB software.
4. Mode d'emploi
Once installed, the darkFlash DNA240A AIO CPU Liquid Cooler operates automatically to maintain optimal CPU temperatures.
- Automatic Fan Control (PWM): The PWM (Pulse Width Modulation) fans automatically adjust their speed based on the CPU temperature, providing an optimal balance between cooling performance and noise levels. This is managed by your motherboard's fan control settings, which can often be configured in the BIOS/UEFI or through motherboard software.
- Synchronisation de l'éclairage ARGB : The ARGB fans and pump head feature customizable lighting effects. These can be synchronized with most addressable RGB motherboards, including those supporting Aura Sync, Mystic Light, and Polychrome Sync. Use your motherboard's RGB software to control lighting modes, colors, and brightness.
- Pompe haute performance : The advanced pump operates at up to 4,000 RPM, ensuring efficient and quiet circulation of the coolant for superior heat dissipation.
Image: Visual representation of the optimized PWM ARGB fans, highlighting their performance metrics such as fan speed (up to 2200 RPM), air capacity (up to 61.7 CFM), fan pressure (up to 1.26 MMH2O), and low noise level (up to 30 dBA).
5. Entretien
Regular maintenance helps ensure the longevity and optimal performance of your darkFlash DNA240A AIO CPU Liquid Cooler.
- Élimination de la poussière : Nettoyez régulièrement la poussière accumulée sur les ailettes du radiateur et les pales du ventilateur à l'aide d'air comprimé ou d'une brosse douce. L'accumulation de poussière peut entraver la circulation de l'air et réduire l'efficacité du refroidissement.
- Inspecter les tubes : Visually inspect the liquid tubes for any signs of kinks, cracks, or leaks. While the high polymer rubber hose is designed for durability, regular checks are recommended.
- Vérifier les connexions : Ensure all power and ARGB cables remain securely connected to the motherboard and components.
- Pas de remplissage de liquide de refroidissement : The AIO cooler is a sealed unit and does not require coolant refills or maintenance. Do not attempt to open the unit.
6. Dépannage
If you encounter issues with your darkFlash DNA240A AIO CPU Liquid Cooler, refer to the following common problems and solutions.
| Problème | Cause possible | Solution |
|---|---|---|
| Températures élevées du processeur |
|
|
| Fans Not Spinning / No RGB |
|
|
| Bruit inhabituel provenant de la pompe/des ventilateurs |
|
|
7. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | DN360A (Note: This model is the 240mm variant, despite the model number DN360A) |
| Matériau du radiateur | Aluminium |
| Matériau de la plaque froide | Cuivre, ailettes micro-skived |
| Méthode de refroidissement | Refroidissement par eau |
| Type de ventilateur | PWM ARGB Fans |
| Vitesse du ventilateur | Up to 1800 RPM ±10% (as per feature bullets, 2200 RPM in image) |
| Capacité de débit d'air | 61.7 pieds cubes par minute (CFM) |
| Niveau de bruit | ≤30 dBA |
| Vitesse de la pompe | 4000 tr / min ± 10% |
| Type de connecteur d'alimentation | 5-Pin (for integrated cable) |
| Voltage | 12 volts |
| Quoitage | 1.8 watts |
| Sockets de processeur compatibles | Intel: LGA 1200/115X/1700/1851 AMD: AM4/AM5/AM2/AM2+/AM3/AM3+/FM1/FM2 |
| Dimensions du colis | 15.12 x 8.94 x 5.51 pouces |
| Poids de l'article | 3.42 livres |
8. Garantie et assistance
darkFlash stands behind the quality of its products.
- Garantie: The darkFlash DNA240A AIO CPU Liquid Cooler comes with an exceptional 3-year assurance. Please retain your proof of purchase for warranty claims.
- Assistance clientèle : For technical assistance, troubleshooting, or warranty inquiries, please visit the official darkFlash website ou contactez leur équipe de support client.
- Ressources en ligne : Des informations supplémentaires et une FAQ peuvent être disponibles sur le site web. darkFlash Store on Amazon.
