1. Introduction
The Moman CP-S Motorcycle Intercom System is designed to provide clear and reliable communication for motorcyclists. Featuring advanced Bluetooth 5.1 technology, noise reduction, and a robust waterproof design, it enhances your riding experience by allowing group communication, music sharing, and hands-free phone calls.
Figure 1: Moman CP-S Intercom Unit with key features.
2. Contenu du colis
The Moman CP-S package includes the following items:
- Moman CP-S Intercom Unit
- Headphone and Microphone Set
- Mounting Clip (for helmet edge)
- Adhesive Mount (for helmet surface)
- Câble de chargement USB
- Interchangeable Decorative Shells (3 colors)
- Manuel d'utilisation
- Installation Tools (screwdriver)
3. Guide d'installation
Proper installation ensures optimal performance and comfort. Follow these steps to install your Moman CP-S intercom system on your helmet.
3.1. Preparing the Helmet
- Remove the helmet's inner lining and cheek pads if they are removable. This provides easier access for speaker and microphone placement.
- Identify suitable locations for the speakers (near your ears) and the microphone (near your mouth).
3.2. Installation de l'interphone
Choose between the clip mount or the adhesive mount based on your helmet type and preference.
Using the Clip Mount:
- Loosen the screws on the clip mount using the provided screwdriver.
- Slide the clip mount onto the bottom edge of your helmet, ensuring it is securely fastened.
- Tighten the screws to secure the clip mount in place.
Utilisation du support adhésif :
- Nettoyez soigneusement la zone de montage souhaitée sur le côté de votre casque.
- Peel off the protective film from the adhesive mount and firmly press it onto the helmet surface for at least 30 seconds. Allow sufficient time for the adhesive to bond before attaching the intercom unit.
Attaching the Intercom Unit:
- Slide the Moman CP-S intercom unit onto the installed clip or adhesive mount until it clicks securely into place.
3.3. Installation des haut-parleurs et du microphone
- Attach the adhesive pads to the back of the speakers.
- Carefully place the speakers inside the helmet, aligning them with your ears. Press firmly to secure.
- Attach the adhesive pad to the microphone.
- Position the microphone near your mouth, ensuring it is not obstructed by the helmet's padding.
- Connect the speaker and microphone cables to the appropriate ports on the intercom unit.
3.4. Gestion des câbles
Tuck all excess cables neatly under the helmet's inner lining to prevent discomfort and ensure they do not interfere with helmet function. Reinstall any removed inner lining or cheek pads.
Video 1: Installation guide for Moman H2 Intercom (similar to CP-S).
4. Mode d'emploi
4.1. Marche/Arrêt
- Mise sous tension : Press and hold the Power button for 3 seconds until the indicator light turns on.
- Éteindre: Maintenez le bouton Marche/Arrêt enfoncé pendant 3 secondes jusqu'à ce que le voyant s'éteigne.
4.2. Couplage Bluetooth
- With the device off, press and hold the Function button for 3 seconds. The red and blue indicator lights will flash, indicating pairing mode.
- On your mobile phone, enable Bluetooth and search for "FODSPORTS FX-S" (or similar device name). Select it to pair. The pairing is complete when the indicator light changes.
4.3. Lecture de musique
- Lecture/Pause : Appuyez brièvement sur le bouton Fonction.
- Chanson suivante : Rotate the control knob forward once.
- Chanson précédente : Rotate the control knob backward once.
- Réglage du volume : Rotate the control knob forward or backward for 1 second to increase or decrease volume.
Figure 2: Music sharing feature between two riders.
4.4. Appels téléphoniques
- Répondre/Terminer l'appel : Appuyez brièvement sur le bouton Fonction.
- Rejeter l'appel : Appuyez longuement sur le bouton Fonction pendant 1 seconde.
- Assistant vocal: Single click to activate AI voice assistant (e.g., Siri, Google Assistant).
- Basculer les appels de réponse manuelle/automatique : Long press the Function button and ON/OFF button for 3 seconds.
Figure 3: AI Voice Assistant and FM Radio features.
4.5. Communication par interphone
- The Moman CP-S supports intercom communication for up to 8 riders within a 2000m range, and 2 riders within a 1000m range.
- It is compatible with other intercom brands.
Figure 4: Group intercom communication range and capabilities.
4.6. Radio FM
- Activate the FM radio function to listen to broadcasts while riding.
Vidéo 2 : Terminéview of Moman H2S Intercom features (similar to CP-S).
5. Spécifications
| Fonctionnalité | Description |
|---|---|
| Numéro de modèle | CP-S |
| Technologie sans fil | Bluetooth 5.1 |
| Portée de l'interphone | Up to 2000m (8 riders), 1000m (2 riders) |
| Capacité de la batterie | 900mAh |
| Temps de charge | 2 heures |
| Heure de l'interphone | Jusqu'à 28 XNUMX heures |
| Temps de lecture de la musique | Jusqu'à 33 XNUMX heures |
| Temps de veille | Jusqu'à 300 XNUMX heures |
| Résistance à l'eau | IP65 (étanche) |
| Réduction du bruit | DSP and 12th Gen CVC |
| Taille du haut-parleur | 40mm Hi-Fi |
| Méthode de contrôle | Voix, Boutons |
| Invites vocales | 8 languages (Chinese, English, Japanese, German, French, Italian, Spanish, Korean) |
| Matériel | Plastique |
| Caractéristiques spéciales | Noise cancellation, Water resistant, Music sharing, FM Radio, AI Voice Assistant, Interchangeable shells |
Figure 5 : Autonomie de la batterie et détails de charge.
Figure 6: IP65 Water and Dust Resistance.
6. Entretien
- Gardez l'appareil propre et sec. Essuyez-le avec un chiffon doux et sec.amp tissu.
- Évitez d'exposer l'appareil à des températures extrêmes ou à la lumière directe du soleil pendant des périodes prolongées.
- Pour préserver l'étanchéité, veillez à bien fermer le couvercle du port de chargement lorsqu'il n'est pas en charge.
- Rechargez régulièrement l'appareil, même s'il n'est pas utilisé, afin de préserver la durée de vie de la batterie.
7. Dépannage
7.1. Pas d'alimentation
- Assurez-vous que la batterie est chargée. Branchez l'appareil à une source d'alimentation à l'aide du câble USB fourni.
- Check if the power button is being held for the correct duration (3 seconds).
7.2. Cannot Pair with Phone
- Ensure the device is in pairing mode (red and blue indicator lights flashing).
- Désactivez puis réactivez le Bluetooth de votre téléphone.
- Ensure the device is within range of your phone.
- Forget previous Bluetooth connections on your phone and try pairing again.
7.3. Poor Audio Quality/Noise
- Ensure speakers are correctly positioned near your ears and the microphone is close to your mouth.
- Check for any obstructions around the microphone.
- Verify that the volume is adjusted appropriately.
- The device features DSP and CVC noise reduction, which should minimize ambient noise. If issues persist, ensure the microphone is not picking up excessive wind noise.
Figure 7: Audio quality and noise reduction technology.
8. Garantie et assistance
The Moman CP-S Motorcycle Intercom System comes with a 2-year manufacturer's warranty. For technical support, warranty claims, or any other inquiries, please contact Moman customer service through their official channels.
