Transformers Legacy Deluxe Class Origin Bumblebee Instruction Manual
Modèle : G1292
1. Produit terminéview
The Transformers Legacy Deluxe Class Origin Bumblebee action figure brings the iconic character to life, inspired by his appearance in the first episode of the 1984 G1 animated series. This 5.5-inch figure is designed for collectors and fans aged 8 and up, offering versatile play and display options.
It features a 2-in-1 conversion capability, transforming between a robot mode and a Cybertronian hovercraft mode. The figure includes a blaster and five energy conductor accessories, enhancing its display and play value.
Image: Origin Bumblebee figure in robot mode, ready for action.
2. Consignes de sécurité
AVERTISSEMENT : RISQUE D’ÉTOUFFEMENT – De petites pièces peuvent se détacher. Ne convient pas aux enfants de moins de 3 ans.
Please ensure that all small accessories are kept away from young children to prevent accidental ingestion. Adult supervision is recommended during play, especially for younger users.
3. Contenu de la boîte
- 1 x Origin Bumblebee Action Figure
- 1 x Blaster Accessory
- 5 x Energy Conductor Accessories
- Manuel d'instructions (ce document)
Image: Contents as packaged, including the figure and accessories.
4. Installation et transformation
The Origin Bumblebee figure converts between robot and Cybertronian hovercraft modes in 23 steps. Follow these general guidelines for transformation:
- Inspection initiale : Carefully remove the figure and accessories from the packaging. Familiarize yourself with the figure's joints and moving parts.
- Robot Mode to Cybertronian Hovercraft Mode:
Begin by folding the arms and legs according to the molded lines and hinges. Ensure all panels align correctly to form the sleek hovercraft shape. Pay close attention to the leg panels, as they form part of the vehicle's rear section.
Image: Origin Bumblebee in Cybertronian hovercraft mode.
- Cybertronian Hovercraft Mode to Robot Mode:
Reverse the transformation steps, carefully unfolding the vehicle panels to reveal the robot form. Ensure all joints click into place securely for stability. The back of the packaging provides a visual guide for the transformation sequence.
Image: Visual guide for transformation steps.
5. Utilisation de la figure
5.1 Articulation et pose
The Origin Bumblebee figure features articulated head, arms, and legs, allowing for a wide range of dynamic action poses. Gently move the joints to achieve desired stances. Avoid forcing joints beyond their natural range of motion to prevent damage.
Image: Origin Bumblebee in a dynamic action pose.
5.2 Fixation des accessoires
The figure comes with a blaster and five energy conductor accessories. These accessories can be attached to the figure in robot mode. Locate the designated ports on the figure's hands and other areas to securely fit the accessories.
- Blaster : Insert the blaster into Bumblebee's hand port.
- Energy Conductors: These can be attached to various ports on the figure, particularly in robot mode, to simulate energy effects or additional weaponry.
Image: Origin Bumblebee with energy conductor accessories.
6. Maintenance et entretien
- Nettoyage: Wipe the figure with a soft, dry cloth to remove dust. For stubborn dirt, a slightly damp On peut utiliser un chiffon, mais évitez les produits chimiques agressifs ou les nettoyants abrasifs.
- Stockage: Conservez la figurine dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes afin d'éviter toute dégradation ou décoloration du matériau.
- Manutention: Always handle the figure by its main body parts. Avoid excessive force on small or thin components, especially during transformation.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Figure parts (e.g., leg panels) pop off during transformation. | Common during complex transformations; parts are designed to detach rather than break under stress. | Gently reattach the popped-off part. Ensure proper alignment before applying pressure. Refer to the transformation guide on the packaging for correct panel orientation. |
| Joints feel too tight or stiff. | Manufacturing tolerance or newness of the figure. | Carefully and slowly work the joint back and forth to loosen it. Do not force it. If a joint feels excessively tight, a very small amount of silicone shock oil (not petroleum-based lubricants) can be applied with a toothpick, but this is generally not recommended unless absolutely necessary. |
| Figure does not hold a pose well. | Loose joints or improper transformation. | Ensure all transformation steps are completed correctly and parts are fully tabbed in. If joints are loose, they may require minor tightening (e.g., applying a thin layer of clear nail polish to the peg, allowing it to dry, then reassembling, but this is an advanced modification). |
8. Spécifications du produit
- Marque: Transformateurs
- Numéro de modèle : G1292
- Taille de la silhouette : Environ 5.5 pouces (14 cm)
- Étapes de conversion : 23 steps (Robot to Cybertronian Hovercraft)
- Âge recommandé : 8 ans et plus
- Dimensions du produit : 14.63 x 10.5 x 6.13 pouce (emballage)
- Poids de l'article : 2.6 onces
- Date de sortie : 14 janvier 2025
- Fabricant: Hasbro
9. Garantie et assistance
For information regarding product warranty, returns, or technical support, please refer to the official Hasbro customer service channels or the retailer from whom the product was purchased. Keep your proof of purchase for any warranty claims.
You can often find support information on the official Transformers or Hasbro websites. Look for sections like "Customer Service," "Support," or "Contact Us."
Remarque : Les conditions de garantie spécifiques peuvent varier selon la région et le détaillant.
