Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AF12 3-in-1 ARGB Fan Kit. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.
Caractéristiques du produit
The aigo AF12 3-in-1 ARGB Fan Kit offers efficient cooling and customizable lighting for your computer system. Key features include:
- Modèle: AF123IN1-BK
- Quantité de ventilateurs : 3 ventilateurs de 120 mm
- Vitesse du ventilateur : 800-2000 tr/min (±10%)
- Fan Noise Level: ≤30 dBA
- Débit d'air : 86.6 piXNUMX/min
- Pression statique: 1.27mm-H²O
- Working Current (Motor): ≤0.2A (12V)
- Working Current (Light): ≤0.48A (5V)
- Dimensions: 120 x 120 x 25 mm
- Éclairage ARGB : Addressable RGB lighting for customizable effects.
Contenu du colis
Vérifiez que tous les éléments énumérés ci-dessous sont présents dans votre colis :
- 3 x aigo AF12 ARGB Fans
- Vis de montage
- ARGB Controller (if included in kit)
- Cables (Power, ARGB Sync)
Guide d'installation
Follow these steps to properly install your aigo AF12 ARGB fans into your computer case.
- Préparez votre système : Power off your computer and disconnect it from the power source. Open your computer case.
- Identifier les emplacements de montage : Determine the desired locations for your fans (e.g., front, top, rear, bottom of the case). Ensure proper airflow direction.
- Installez les ventilateurs : Position each fan in its chosen location. Use the provided mounting screws to secure the fans to the case. Ensure the fan blades are not obstructed.
Image: An aigo AF12 fan viewed from an angle, highlighting the mounting points on its corners. This illustrates how the fan is secured.
- Brancher les câbles d'alimentation : Connect the 3-pin power connector from each fan to an available fan header on your motherboard or fan controller.
- Connectez les câbles ARGB : Connect the ARGB cable from each fan to the ARGB controller (if applicable) or directly to a compatible 5V 3-pin ARGB header on your motherboard. Ensure correct pin orientation to avoid damage.
Image : Un côté profile of the aigo AF12 fan, illustrating the thickness and potential locations for cable connections on the frame.
- Gestion des câbles: Route cables neatly to prevent interference with other components and to improve airflow.
- Fermer le boîtier et mettre sous tension : Refermez le boîtier de votre ordinateur, rebranchez l'alimentation et allumez votre système.
Mode d'emploi
Once installed, your aigo AF12 ARGB fans will operate automatically based on your system's fan control settings. The ARGB lighting can be controlled via your motherboard's software or a dedicated ARGB controller.
Contrôle de la vitesse du ventilateur
Fan speed can typically be adjusted through your motherboard's BIOS/UEFI settings or through fan control software provided by your motherboard manufacturer. Refer to your motherboard manual for specific instructions.
Contrôle d'éclairage ARGB
If connected to a 5V 3-pin ARGB header on your motherboard, use your motherboard's ARGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and patterns.
If using a dedicated ARGB controller (often included with fan kits), refer to the controller's specific instructions for lighting adjustments.
Entretien
Un entretien régulier garantit des performances optimales et prolonge la durée de vie de vos ventilateurs.
- Nettoyage de la poussière : Periodically clean dust from the fan blades and housing using compressed air or a soft brush. Ensure the system is powered off before cleaning.
- Vérification des câbles : Verify that all cables are securely connected and free from damage.
- Surveillance du bruit : Listen for unusual noises, which may indicate a fan bearing issue or obstruction.
Dépannage
If you encounter issues with your aigo AF12 ARGB fans, refer to the following common solutions:
Les ventilateurs ne tournent pas
- Vérifiez la connexion électrique : Ensure the fan's 3-pin power connector is securely plugged into the motherboard or controller.
- Check BIOS Settings: Verify that fan headers are enabled in your motherboard's BIOS/UEFI settings.
- Test Another Header: Try connecting the fan to a different fan header to rule out a faulty header.
ARGB Lights Not Working
- Vérifier la connexion ARGB : Ensure the 5V 3-pin ARGB connector is correctly and securely plugged into the motherboard or controller. Verify the pin orientation.
- Vérifier le logiciel : Confirm that your motherboard's ARGB software is installed and configured correctly.
- Compatibilité: Ensure your motherboard has a compatible 5V 3-pin ARGB header. This product is not compatible with 12V 4-pin RGB headers.
Bruit excessif
- Vérifiez les obstructions : Veillez à ce qu'aucun câble ni autre composant ne touche les pales du ventilateur.
- Vis de montage: Verify that all mounting screws are tightened to prevent vibrations.
- Accumulation de poussière : Nettoyez les pales du ventilateur de toute poussière.
Spécifications techniques
| Fonctionnalité | Spécification |
|---|---|
| Marque | aigo |
| Modèle | AF123IN1-BK |
| Quantité de ventilateur | 3 x 120 mm |
| Vitesse du ventilateur | 800 ± 2000 ± 10% RPM |
| Bruit du ventilateur | ≤ 30 dBA |
| Flux d'air | 86.6 piXNUMX/min |
| Pression statique | 1.27mm-H²O |
| Working Current (Motor) | ≤ 0.2A (12V) |
| Working Current (Light) | ≤ 0.48A (5V) |
| Dimensions | 120 x 120 x 25 mm |
| Type de connecteur d'alimentation | 3 broches |
| Voltage | 12 volts |
| Méthode de refroidissement | Air |
| Appareils compatibles | Bureau |
| Poids de l'article | 10.6 onces |
Garantie et assistance
This aigo product comes with a Garantie de 12 mois à compter de la date d'achat, couvrant les défauts de fabrication.
For technical support, warranty claims, or further assistance, please visit the official aigo store or contact their customer service through the details provided on their website.
Official aigo Store: aigo Store on Amazon
