REDTIGER 11.5Ft USB Type-C Power Cord Instruction Manual

Introduction

Thank you for choosing the REDTIGER 11.5Ft USB Type-C Power Cord. This cable is specifically designed to provide a stable power supply to your REDTIGER series dash camera. Its extended length allows for flexible installation within your vehicle.

Important Note: This power cord is for power delivery only and does not support data transfer functions.

Image: The REDTIGER 11.5Ft USB Type-C Power Cord, showing the USB-A connector on one end and the right-angle USB-C connector on the other.

Consignes de sécurité

• Ensure the power source in your vehicle provides the correct voltage and current for your dash camera.
• Do not modify or attempt to repair the power cord. Contact customer support if damaged.
• Keep the cable away from extreme heat, moisture, and sharp objects.
• Route the cable securely to avoid interference with vehicle controls or driver visibility.

Contenu du colis

Le forfait comprend:

• 1 x REDTIGER 11.5Ft USB Type-C Power Cord

Instructions d'installation

1. Se connecter à la Dash Cam : Insert the USB Type-C end of the power cord into the corresponding port on your REDTIGER dash camera. Ensure a firm connection.
   

   Image : Gros plan view of the right-angle USB Type-C connector securely plugged into the dash camera's power input port.

2. Acheminement du câble : Carefully route the 11.5-foot power cord along the edges of your vehicle's interior, such as under the dashboard, along the A-pillar, and across the headliner. Use cable clips (not included) if necessary to secure the cable and prevent it from obstructing your view ou les commandes du véhicule.
   

   Image: An illustration demonstrating the recommended cable routing path from the dash camera, along the windshield and A-pillar, down to the car's power outlet.

3. Connectez-vous à la source d'alimentation : Plug the USB Type-A end of the power cord into a compatible USB power adapter (e.g., a car charger or USB port) in your vehicle.
   

   Image: A close-up of the USB-A connector inserted into a car charger, indicating the power input connection.
4. Vérifiez l'alimentation : Once connected, your dash camera should power on, indicating a successful connection.

Mode d'emploi

This power cord operates on a simple plug-and-play principle. Once properly connected to a power source and your dash camera, it will continuously supply power, allowing your dash camera to function as intended. No additional configuration is required for the power cord itself.

Remember: This cable is exclusively for power. It cannot be used to transfer files, update firmware, or perform any data-related functions between your dash camera and another device.

Entretien

• Keep the cable clean and free from dust and debris.
• Évitez les coudes ou les torsions brusques du câble, car cela peut endommager les fils internes.
• Do not pull on the cable itself when disconnecting; always grasp the connector housing.
• Rangez le câble dans un endroit frais et sec lorsqu'il n'est pas utilisé.

Dépannage

Caractéristiques

• Marque: TIGRE ROUGE
• Modèle: 11.5 pieds
• Type de connecteur : USB Type-C (male) to USB Type-A (male)
• Type de câble : Câble d'alimentation USB
• Longueur: 11.5 pieds (environ 3.5 mètres)
• Fonction: Power Only (No Data Transfer)
• Appareils compatibles : REDTIGER series dash cameras
• Couleur: Noir
• Dossier spécial : Lightweight, Durable Design

Garantie et assistance

REDTIGER fournit un 18-month assurance service for this power cord, ensuring it meets your expectations and remains in top condition.

For any questions, technical assistance, or warranty claims, please contact REDTIGER customer support.

• Service client: Available 24/7 via Email or Phone.
• Politique de retour: 7-day return policy and return on defects.

Image: Icons representing REDTIGER's customer support channels: 24-hour service, email, and phone support.