WALI GSMU001XL Single Monitor Gas Spring Desk Mount Instruction Manual

Produit terminéview

The WALI GSMU001XL is a heavy-duty single monitor gas spring desk mount designed to support ultrawide or curved LCD/LED screens ranging from 17 inches to 49 inches. It can hold monitors weighing up to 44 lbs and is compatible with VESA mounting patterns of 75x75mm and 100x100mm. This mount offers full adjustability for optimal viewing angles and includes integrated USB Type-C and USB Type-A 3.0 ports for convenient connectivity.

The mount features a two-stage locking system, supporting both C-clamp and Grommet Base installations on desks with a thickness between 0.47 inches and 1.97 inches.

Contenu du colis

Before beginning installation, please ensure all components are present and undamaged. If any parts are missing or damaged, contact WALI customer support.

1 x WALI Ultrawide Monitor Desk Mount (GSMU001XL)
Kit de montage (vis, rondelles, entretoises, clés Allen)
Manuel d'utilisation

Configuration et installation

Follow these steps carefully to install your WALI GSMU001XL monitor mount. Two installation methods are available: C-clamp et base à œillet.

Étape 1 : Choisir la méthode de montage

Déterminer s'il convient d'utiliser le C-clamp or Grommet Base. Both methods are compatible with desk thicknesses from 0.47 inches to 1.97 inches.

Image montrant C-clamp and Grommet base mounting options for desks between 0.47 and 1.97 inches thick. — Figure 1: C-clamp and Grommet base mounting options. The C-clamp secures to the edge of the desk, while the Grommet base uses an existing hole in the desk.

Step 2: Assemble the Base and Arm

Assemble the base according to your chosen mounting method (C-clamp or Grommet Base). Attach the lower arm section to the base.

Étape 3 : Fixez la plaque VESA au moniteur

Attach the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely but do not overtighten.

Étape 4 : Fixer le moniteur au bras

Carefully slide the monitor (with the attached VESA plate) onto the upper arm section. Ensure it locks into place. It is recommended to have assistance when mounting heavier monitors.

Diagram illustrating the 3-step fast setup process: 1) Attach base to desk, 2) Connect arm sections, 3) Slide VESA-mounted monitor onto the arm. — Figure 2: Simplified 3-step setup process for the monitor arm.

Step 5: Connect USB Cables

Connect the integrated USB Type-C and USB Type-A 3.0 ports on the mount to your computer using the provided cables. Route cables through the arm's cable management channels for a tidy setup.

Close-up of the monitor arm's base showing integrated USB-A and USB-C ports, with a phone charging via USB-C. — Figure 3: Detachable USB connector for cable management and device charging.

Utilisation du bras du moniteur

The WALI GSMU001XL monitor arm offers extensive adjustability to achieve an ergonomic viewposition de départ.

Réglage de la position du moniteur

The arm allows for the following movements:

Inclinaison: Adjust the monitor angle from +50° to -20°.
Pivot: Rotate the monitor horizontally up to +90°/-90°.
Rotation: Faites pivoter le moniteur à 360° pour basculer entre les modes paysage et portrait.
Réglage de la hauteur : The gas spring arm allows for a height range of 9.09 inches to 19.69 inches.
Extension: Le bras peut s'étendre jusqu'à 21.93 pouces.

Diagram showing the swivel, tilt, and rotate capabilities of the monitor arm, with maximum arm extension indicated. — Figure 4: Demonstrates the full range of motion for swivel, tilt, and rotation.

Réglage de la tension du ressort à gaz

The gas spring tension must be adjusted to match your monitor's weight for proper balance and movement. Use the provided Allen wrench to adjust the tension screw located on the arm.

To adjust for lighter monitors or if the monitor floats up: Turn the tension screw dans le sens des aiguilles d'une montre.
To adjust for heavier monitors or if the monitor sags down: Turn the tension screw dans le sens antihoraire.

Ajustez progressivement jusqu'à ce que le moniteur reste en position lorsqu'on le relâche.

Diagram showing the height range of the pneumatic arm and instructions for tension adjustment: clockwise for lighter monitors, counter-clockwise for heavier monitors. — Figure 5: Height range and tension adjustment mechanism of the pneumatic arm.

Entretien

To ensure the longevity and proper function of your WALI monitor arm, follow these simple maintenance guidelines:

Nettoyage: Essuyez le bras et la base avec un chiffon doux et sec.amp Chiffon. Évitez les nettoyants abrasifs ou les solvants qui pourraient endommager la finition.
Contrôles périodiques : Vérifiez régulièrement le serrage de toutes les vis et fixations. Resserrer si nécessaire.
Ressort à gaz : The gas spring is designed for long-term use and typically requires no maintenance. If you notice changes in its performance, refer to the troubleshooting section.

Dépannage

Si vous rencontrez des problèmes avec le bras de votre écran, consultez les problèmes et solutions courants suivants :

Problem: Monitor Sags or Drops

Solution: The gas spring tension is likely too low for your monitor's weight. Turn the tension screw dans le sens antihoraire augmenter la tension jusqu'à ce que le moniteur maintienne sa position.

Problem: Monitor Floats Up or is Difficult to Push Down

Solution: The gas spring tension is likely too high for your monitor's weight. Turn the tension screw dans le sens des aiguilles d'une montre to decrease tension until the monitor holds its position.

Problem: Monitor is Unstable or Wobbles

Solution:

Assurez-vous que toutes les vis de fixation (bureau cl) sont bien en place.amp(œillet, plaque VESA, connexions du bras) sont solidement serrés.
Verify that your desk is stable and can support the weight of the mount and monitor.

Problem: USB Ports Not Functioning

Solution:

Ensure the USB cables from the monitor arm are properly connected to your computer's USB ports.
Test with different USB devices or computer ports to rule out device or port issues.

If problems persist after attempting these solutions, please contact WALI customer support.

Caractéristiques

Fonctionnalité	Spécification
Numéro de modèle	GSMU001XL
Marque	WALI
Compatibilité de la taille du moniteur	17" to 49" Ultrawide/Curved
Capacité de poids	Jusqu'à 44 lb (20 kg)
Compatibilité VESA	75x75mm, 100x100mm
Compatibilité avec l'épaisseur du bureau	0.47" - 1.97" (1.2 cm - 5 cm)
Type de montage	Cl-Camp, Base à œillet
Angle d'inclinaison	+50° / -20°
Angle de pivotement	+90° / -90°
Rotation	360° (Paysage vers Portrait)
Plage de hauteur	9.09" - 19.69" (23.1 cm - 50 cm)
Extension maximale du bras	21.93" (55.7 cm)
Ports intégrés	1 x USB Type-C, 1 x USB Type-A 3.0
Matériel	Aluminium
Couleur	Noir

Vidéo du produit

Video demonstrating the features and functionality of the WALI Single Monitor Gas Spring Desk Mount.

Garantie et assistance

For warranty information or technical assistance, please contact WALI customer support. WALI provides experienced and friendly US-based customer support available to assist 7 days a week.

Refer to the product packaging or the official WALI webConsultez ce site pour obtenir les coordonnées et les conditions de garantie les plus récentes.